Inwa MZ-510 Home Retro Speaker User Manual

June 2, 2024
inwa

Inwa MZ-510 Home Retro Speaker

Product Information

  • Specifications
    • Playtime: 5 hours
    • Standby time: 4 days
    • Bluetooth range: 32 feet
    • Frequency response: 20Hz-20kHz
    • Rated voltage: 9V
    • Rated power: 8W
    • Battery capacity: 600mAh
    • Bluetooth version: 4.2
    • Net weight: 15g
    • Product size: 115mm x 175mm x 76mm

Product Usage Instructions

  • Safety Instructions
    • Read all safety information and operating instructions before using the product.
    • Follow all instructions for product operation. Avoid using near heat sources or exposure to sunlight and high temperatures.
  • Modes
    • The speaker has two modes: Bluetooth mode and AUX mode. It automatically reconnects to the last paired device when turned on.
  • Bluetooth Mode
    • Power on the speaker.
    • Pair the speaker with your device.
    • When pairing is complete, a beep will sound, and the green power indicator will be on.
    • The green indicator light will be always on when playing music in Bluetooth mode.
  • AUX Mode
    • To switch to AUX mode:
    • Insert the 3.5mm audio cable into the AUX port.
    • Short press the mode/pairing button to switch to AUX mode.
    • The power indicator will always be on in AUX mode.
  • Indicator Lights
    • The power indicator provides important information:
    • If ready to pair, the power indicator flashes quickly.
    • The green indicator light is on when playing music or in AUX mode.
    • Charging indicator: A red light flashes quickly when the battery is low.
    • The red charging indicator stays on during charging and goes off when fully charged.
  • Controls
    • The speaker controls include:
    • Long press for power on/off.
    • Short press for play/pause in Bluetooth mode.
    • Rotate the button clockwise to increase volume, and counterclockwise to decrease volume.

FAQs

  • Q: What should I do if the speaker does not connect after turning it on?
    • A: Press the power on/off button to restart the speaker.
  • Q: How do I know when the battery is low?
    • A: The red charging indicator will flash quickly and an alarm will sound.

Safety Instructions

  • Read all instructions and save them for future reference.
  • Please follow all instructions for product operation.
  • Do not use near heat sources. Avoid radiators, stoves, and other devices that generate heat. Avoid long-term exposure to sunlight and high temperature.
  • This speaker has 2 modes: Bluetooth mode and audio mode.
  • Note: If the speaker is not connected for 5 minutes after turning on the power, the speaker will power off.To restart the speaker, press power on/off.

Packing list

Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(1\)

Product Size

Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(2\)

Product Parameter

Playtime 12hr-20hr
Standby time ≥300hr
Bluetooth range ≤15m
Frequency response 20HZ-20KHZ
Rated voltage 5V
Rated power 20W
Battery capacity 2200mAh*2
Bluetooth version 5.0
Net weight 850g(With battery)
Product size 175×76×115mm

Product Description

Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(3\)

  1. Power on/off/play/pause/volume up/down:
    • Long press the button to turn on/off the speaker;
    • Short press the button to play/pause music in Bluetooth mode;
    • Turn the button clockwise to increase the volume, or turn the button counterclockwise to decrease the volume.
  2. Next: Switch to the next song (only available for Bluetooth Mode).
  3. Mode/pairing:
    • Short press this button to change the music mode;
    • In Bluetooth mode, press and hold the button for 2 seconds to disconnect from the current device and enter the state of waiting for pairing.
  4. Previous: Switch to the previous song (only available for Bluetooth Mode).
  5. Power indicator: flashes while waiting for pairing, and stays on after successful pairing.
  6. AUX input
  7. Reset
  8. charging indicator
  9. Power interface: DC 5V 1A

Instructions

  • Step 1
    • Press and hold the power button for 2 seconds, and you will hear a boot tone.
    • After powering on, the power indicator will be on for 3 seconds and then it will flash, indicating that the speaker has entered the pairing mode.
    • Note: When the speaker is connected with a line-in cable, the speaker will automatically enter AUX mode after powering ON. Press the Mode button shortly to enter Bluetooth Mode.
  • Step 2
    • Press the mode/pairing button for 2 seconds to disconnect the current connection, and then enter the pairing mode again, the indicator light will also flash.
  • Step 3
    • Search for the Bluetooth device “MZ-510” on the phone, and then tap the device to pair the speaker with the phone.Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(6\)
  • Step 4
    • After the pairing is complete, there will be a beep and the power indicator (green light) will be on.
  • Step 5
    • When playing music, the power indicator (green light) is always on.

Automatically Connect Back

After turning on the speaker, it will automatically reconnect to the last paired device. If the speaker is not connected after turning on the power, the speaker will automatically turn off after 5 minutes.

AUX Mode

  1. Insert the 3.5mm audio cable into AUX mode, or short press the mode/pairing button to switch AUX mode.Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(10\)
  2. The power indicator will always be on in AUX mode.

Indicator Light Description

  1. Connection indicator:
    • If the speakers are ready to pair, the power indicator flashes quickly.
    • BT mode: The speaker is ready to connect.
    • If the speaker is playing music, the power indicator is always on.
  2. Charging indicator:
    • If the battery power is low, the red charging indicator flashes quickly and the speaker will also sound an alarm.
    • The red charging indicator will stay on during the charging process, and will automatically go out when fully charged.Inwa-MZ-510-Home-Retro-Speaker-FIG-1 \(15\)

Solutions To Common Problems

Fault description Solution
Multiple connection pairing failed 1. Check whether the product is in a

search state or restart.
2. There are too many Bluetooth devices around, which makes it difficult to search. Turn off other Bluetooth devices.
Low or distorted sound| 1. Check the volume of the Bluetooth device and adjust the volume to a proper position.
2. Please charge if the battery voltage is low.
Music breaks| 1. Whether it is beyond the effective connection distance of the audio, or there is an obstacle between the speaker and the Bluetooth device.
The bluetooth status indicator is not on| 1. The battery is low. Please fill it up and try again.

2. There are too many Bluetooth devices around, which makes it difficult to search. Turn off other Bluetooth devices.

3. Check whether the product is in a search state or restarted.

Tips: To help prolong the service life of the speaker and your physical and mental health, please do not listen in a long-term high-volume environment to avoid damage to your hearing.

Warranty

Warranty Card

Warranty Records

CONTACT

  • Shenzhen Innosystem Technology Ltd.
  • ADD: 202, Building 3, Shenzhen Software Park, Technology Middle
  • 2 Rd, Gao Xin Science & Technology Park North, Shenzhen
  • TEL: 0755-26995855
  • URL:www.innosystemtech.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals