BRAINZ 38590 Wavebase Speaker Instruction Manual
- June 3, 2024
- BRAINZ
Table of Contents
BRAINZ 38590 Wavebase Speaker
What you need
- USB-C cable (included)
- AUX cable (included)
- Mobile phone with Bluetooth (not included)
How to charge the Wavebase speaker
Connect the included USB-C cable to the speaker (flap on the side of the speaker) and connect the USB side to a power source. The speaker will now charge.
How to set it
Press and hold the button on the side of the speaker with the ‘ ‘ icon for 3 seconds to turn the speaker on. The speaker will appear under your new Bluetooth connections on your phone as Brainz Speaker S95. By clicking on it, your phone connects and the speaker is ready for use.
Volume
- To increase volume, press and hold the + button.
- To decrease volume, press and hold the – button.
Next/previous song
- To select the next number, press the + button.
- To select the previous number, repeat for the button with the – button.
Changing colour
By clicking on the ‘ ‘ icon, you can set the colour to your liking. You can
choose from 9 different colours.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the
other end into the speaker’s AUX port. Now the speaker will automatically
switch to AUX and disable Bluetooth. The AUX port can be found under the flap
on the side of the speaker.
SD
Thanks to the SD access port, you can play MP3 files. To do this, insert an SD
card into the access port. This access port is also found under the flap on
the side of the speaker.
Switch off
To turn off the speaker, press and hold the button on the top of the speaker
with the’ ‘icon for 3 seconds.
Please note: Do not use a charger with a higher voltage than suitable for
this product.
Please note: This item is not dishwasher safe. Clean with a wet cloth.
These instructions apply to article number 38590. For more information about this product, please visit www.brainz-electronics.nl