Shenzhen Dianzhui Culture Technology DZ03 Visual Blackhead Vacuum Device Instruction Manual

Shenzhen Dianzhui Culture Technology DZ03 Visual Blackhead Vacuum Device

Thank you very much for purchasing this product. In order to ensure correct and safe use, please read carefully and keep this manual carefully before use.

Attention
In order for you to use this product correctly, please read and follow the following safety guidelines carefully.

1.  This product is not waterproof. Please do not immerse the product in any form of liquid. Do not use the product near water-bathed bathtubs, shower trays, washbasins or other water-containing utensils. Please keep the product and power adapter dry.
2.  Before using this product, please dry the water or other liquids on your hands to prevent the water or other liquids from entering the interior and damaging the machine.
3.  Do not overuse in an area, it may cause the skin to become red andswelling. It is recommended that the stay time in the same area should not exceed 3 seconds, and each nursing time should not exceed 5 minutes.
4.  Do not use on injured or fragile skin, and on the chin and mouth, Use in fragile areas such as corners and around the eyes.
5.  Do not use on skin with open wounds, acne or pimples.
6.  Do not use it on cuts, areas that have undergone cosmetic surgery, areas where the skin is inflamed, itchy and red.
7.  If you feel uncomfortable while using it, please stop using it immediately.
8.  Continuous use of the body for a long time will generate heat, this phenomenon is not a product failure, Please rest assured to use.
9.  Continuous use of the body for a long time will generate heat, this phenomenon is not a product failure, Please rest assured to use.
10.  If you have any skin problems, please consult a doctor before using this product
11.  Please put the product out of the reach of children, do not let children use, it will cause accidents and injuries.

Introduction

The visual blackhead instrument uses non-invasive vacuum negative pressure technology, with 3 special suction heads, which can Helps effectively remove blackheads, pimples, dirt and aging keratin, clear pores and improves muscles skin. Built-in high-definition camera, which can directly monitor the skin condition and clearly observe the blackhead quilt During the removal process, avoid blindly cleaning or leaking clean skin

Structure

Function

Press and hold the power button for 2 seconds, the instrument is turned on, mode & power indicator Light.

•  Shortly press the button after switching on to switch the mode: Soft (soft)/ Normal / Strong/ Standby.
•  When the battery is low, the battery indicator light flashes slowly.
•  The white indicator of the battery indicator flashes slowly during charging, and the indicator of the battery indicator when fully charged The white light is always on.
•  Each gear works for about 5 minutes. Standby mode after 5 minutes, wait The machine will automatically shut down if there is no operation within 10 minutes.
•  Press and hold the power button for 2 seconds to shut down.

Press and hold for 2 seconds to turn the machine on or off Short press cycle to switch working mode

Procedure

APP download and installation
After scanning the QR code in the user manual with your mobile phone, click to download and install. (If you use WeChat to scan, you need to manually jump to the browser to open)

APP function
The camera connected to the instrument through the APP is more straight during use Easy to clean pores.

1.  After turning on the instrument, set the WIFI connection ID on the mobile phone, such as: UDU Beau ty-1234.

2.  Open the “UDU” APP and enter the home page. If the device is not connected, the APP will The operation guide prompt appears.

3.  After clicking “Open”, you can see the transmission of the instrument camera in the APP window image.

4.  When using, you can adjust the work of the blackhead according to the skin condition of the face position.

5.  After clicking “Video”, the image transmitted by the camera of the instrument can be saved to the mobile phone.

6.  After clicking “Take Photo”, the image transmitted by the instrument camera can be taken as a photo Save to phone.

7.  If you need to switch windows, you can click “AR” to switch windows.

Nursing

1. Download and install the APP (see APP download and installation steps for details)

2.  Connect the instrument through APP (see APP function description for details)

3.  Clean the face before use, apply a hot compress or use a steamer to help pores Open, and then use the blackhead export solution to soften the blackhead, you can easily suck out the blackhead.

4.  Choose the tip suitable for your needs, install it on the top of the instrument and on the palm or forearm Test the suction power.

5.  When in use, you can press the button to select the appropriate mode according to your skin condition. Soft: Soft mode; Normal: Normal mode; Strong: Strong mode.

6.  Make sure that the suction head is close to the skin when using it, and there must be no gaps, otherwise it will not form a vacuum Negative pressure.

7.  Keep moving when using the instrument, the stay time in the same part should not exceed 3 seconds, Each use time does not exceed 5 minutes, enter the standby mode after 5 minutes, standby 10
   minute No operation will automatically shut down.

8.  After using, long press the power button to turn off the instrument, you can apply ice to the skin, Or use with pore astringent to calm the skin.

9.  Facial care is recommended 1-2 times a week.

Charging

1.  Please charge the instrument before using it for the first time.
2.  Please use standard qualified DC5V/1A adapter for charging.
3.  During charging, the power indicator white light flashes breathing.
4.  When fully charged, the power indicator white light is always on.
5.  When the power is low, the red indicator light flashes slowly. Please use it after fully charging.

If the connection has not started after 10 seconds of charging, please confirm whether the USB cable is light Poor micro-contact.

Maintenance and protection

1.  When cleaning, please make sure that the instrument is turned off, the instrument can not be washed to avoid electric shock.
2.  When cleaning the tip, please remove the tip from the machine and rinse it with warm water.
3.  The instrument is not waterproof, you can wipe the body clean with a wet paper towel or a damp cloth after each use, cut Do not rinse with water.
4.  The lens of the product camera is cleaned with a cotton swab. It is forbidden to touch the lens with hard objects.
5.  It is forbidden to use corrosive solution to wipe the body.
6.  Please store the instrument in a normal dry indoor environment.
7.  It is strictly forbidden to disassemble this product by yourself. If any malfunction occurs or cannot be used normally, please stop Stop using and contact online customer service.

Specification

• Name：VISUAL BLACKHEAD VACUUM DEVICE
• Model：DZ02
• Rating：DC5V/ 1A（Built-in lithium battery 3.7Vdc，1000mAh）
• Size：158.54548mm

Warranty
The warranty period of this product may vary according to the country of sale There are different lengths of time, we will allow the law in the country
Try to extend it as much as possible.

•  The warranty period of this product is 1 year from the date of purchase. The accessory warranty is from the date of purchase From 1 year.
•  If the instrument has quality problems during the warranty period, it will be repaired or replaced free of charge. But by you Machine damage caused by improper use or non-standard operation is not covered by the warranty. The cost price is for you to replace the damaged parts or replace them with new ones. The ownership of the old instrument belongs to the manufacturer.
•  Please show your warranty card when you need warranty. The warranty date of this product is as The date is the start date. If you do not have a purchase date, it will be calculated according to the date of manufacture. In the following cases, warranty or return may not be provided Do not undertake to reissue the purchase invoice and warranty card for you, please keep your purchase invoice and warranty card.

1.  For product damage caused by unpredictable events such as fire, earthquake, flood, etc.
2.  Instrument failure and damage caused by your negligence, misuse, or use under other abnormal conditions.
3.  Instrument damage caused by improper disassembly and improper storage (such as rat damage or liquid penetration).
4.  Damage caused by compulsory use of products in non-product use environments, including but not limited to Work load, etc.
5.  Product damage caused by circumstances beyond the control of other manufacturers.
6.  The incidental damage to the function or use of this product (such as damage to your business interests, business Interruption, other losses caused by using the instrument, the use of this product requires replacement of equipment and devices Or the cost incurred by the service, your customers’ claims, etc.), the manufacturer does not Responsibility.

FCCCaution
Thisdevice complieswithpart 15oftheFCCRules. Operationissubject tothe followingtwoconditions: (1) Thisdevice maynot causeharmfulinterference,and(2) thisdevice must accept anyinterferencereceived,includinginterference thatmay cause undesiredoperation. AnyChanges ormodifications notexpresslyapprovedbytheparty responsiblefor compliance couldvoid the user’sauthoritytooperate theequipment.

Note: This equipment has been tested and found to comply with the limits foraClass B digital device, pursuantto part15of the FCCRules. These limitsare designedto providereasonable protectionagainstharmfulinterference inaresidentialinstallation. Thisequipmentgenerates uses andcanradiateradiofrequencyenergyand,if not installedandusedin accordancewiththeinstructions,maycauseharmful interference toradiocommunications. However,there isnoguaranteethatinterferencewillnot occur inaparticularinstallation.Ifthisequipmentdoescauseharmfulinterference to radio ortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon, theuseris encouragedto tryto correcttheinterferencebyoneormoreofthe followingmeasures:

•  Reorient orrelocatethereceivingantenna.
•  Increasetheseparationbetweentheequipment andreceiver.
•  Connect theequipmentinto anoutletonacircuitdifferent from that towhichthe receiverisconnected.
•  Consultthedealer oranexperiencedradio/TVtechnicianforhelp.

This equipmentcomplieswithFCC radiation exposure limits setforthforan uncontrolledenvironment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>