Culture MGM-003 True Wireless Bluetooth Headset Instruction Manual

Culture MGM-003 True Wireless Bluetooth Headset

Product Information

Specifications

• Device Type: [Product Name]

• Model Number: [Model Number]

• Compliance: FCC Part 15

• Radiation Exposure Limits: FCC approved for uncontrolled
  environment

• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Caution

Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Limits

This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body. This ensures compliance with FCC radiation exposure limits set forth for an uncontrolled environment.

FAQ (Frequently Asked Questions)

Q: What is the compliance standard for this device?

A: This device complies with part 15 of the FCC Rules.

Q: Can I make any modifications to the device?

A: No, any changes or modifications not explicitly approved by the manufacturer can void your authority to operate this equipment.

Q: Is there a minimum distance requirement for operating the equipment?

A: Yes, this equipment should be operated with a minimum distance of 0cm between the radiator and your body to comply with FCC radiation exposure limits.

Packing list

Product diagram

Tips

1. Except for the operation methods specifically marked in the monopoly, please do not try to disassemble or replace any ports in the earbuds.
2. Don’t put the earbuds in the water or any other liquid. The earbuds ore not waterproof.
3. If any liquid enters the product accidentally, please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to ovoid electricshock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in an environment with strong electromagnetic force, otherwise, it will cause product malfunction.

Product specifications

• Bluetooth version: VS.3
• Music time : 5hours(60% volume)
• Charging time: 1.5hours
• Roted input: SV 30mA
• Transmission distance: 10M
• Horn size : $13mm
• Battery capacity: 35mAh/3.7V

Charging case specifications

• Battery capacity: 300mAh/3.7V

• Charging time: 1-2 hours

• Rated input: SV = 250mA
  (All technical information is subject to actual performance)
  (tip: When the headset is in low power (3.2+/-0.1v), there will be  Please charge prompt tone every minute until the headset is powered off)

• Rated input: 5V=30mA {headset)

• Rated input: SV= 250mA (charging case)

LED Indicator Status

Product Operation Instructions

1. Turn on
2. Method I: Take out the earphone from the charging bin, and the earphone will start automatically
3. Method 2: The earphone is outside the charging bay and in the off state.
4. Long press the touch position for 5 seconds, and the earphone will have a”power on” prompt tone at the same time
5. Turn off
   • Method I: In the startup state, put the earphone into the charging box, and the earphone will automatically shut down and enter the charging mode
   • Method 2: Hold down the touch button for 5 seconds, and the earphone will hear the “Power Off” tone
   • Method 5: When the earphone battery runs out, the earphone has a “power off” prompt tone, and the earphone shuts down itself
   • Method 4: If no operation is performed after connection or connection is successful, the headset automatically shuts down 5 minutes after timeout
6. Pairing and connection
   Enter the pairing state: After the device is powered on, the left and right earphones are close to each other, and the left and right earphones are automatically connected. When the connection is successful, the earphones will sound “Didi” .Earphone connection: After the two earphones are paired, search ” STMK-MGM-003 ” on the mobile phone and click “Connect” to use the earphones. When the connection is successful, the earphone will sound “connection success”.

Connect back: After the headset is powered on, the system automatically searches for the last Bluetooth device to connect Back

Touch operation

General mode

Music playback mode

Call mode

The name and content of harmful substances in the earbuds

Warranty Statement

Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only,and the content will also be updated on the web at any time without additional separate notice

Warranty statement:
The product attached to this document is guaranteed as follows:lf the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced the product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days)Purchased by sale the ticket date shall prevail;if the purchase date cannot be determined,the warranty period shall be 16 (15) months If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.

The above guarantee does not apply to the following situations:

1. Exceeding the validity period of the three packs;
2. Altering the warranty card and product code does not match the product body;
3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
4. Failure or damage caused by force majeure (such as earthquake, war, disaster,etc.) or accident bad;
5. The zipper and tower buckle are damaged due to excessive force;
6. Disconnection or tearing caused by excessive load;
7. Any damage caused by sharp objects;
8. Products with signs of burning of flooding;
9. Damage caused by unauthorized disassembly; and other losses that occur during the normal use of the product.
10. If the original identification label of the product is changed or damaged,this guarantee will become invalid.
11. The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
12. The above guarantees are all guarantees we make regarding the products,and are only applicable in mainland China-Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. (2) this device must accept any interference received, including interference that may cause undesired operation.
   This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>