Sinco Intelligent 2ARCP-CUBETURNER Cube Turner Pro Wireless Mute Page Turner Pedal Instruction Manual
- June 15, 2024
- Sinco Intelligent
Table of Contents
Sinco Intelligent 2ARCP-CUBETURNER Cube Turner Pro Wireless Mute Page Turner Pedal
Product Description
Thank you for purchasing this Cube Turner Pro. This product is suitable for
Mobile Phone, PAD or Computer. we can use it for turning the page. viewing
pictures, controlling some software of Computer Phone, replacing some keys of
Computer keyboard. It also could be used while the power switch in OFF. it tan
bellow “Momentary Switch of the other product.
This product adopts foot-control design end wireless BT connection. which is
simple end convenient. The built-in battery can be used continuously for up lo
48 hours when it is fully charged. The player can realize one-foot operate the
equipment. make your operation more smooth!
Features
This product has 7 modes to choose from, please select a mode according to
your requirements.
The 7 modes correspond one-to-one to the seven lights on the left side of the
front panel. Please refer to the following introduction.
- It can replace the Left and Right keys of the computer keyboard, or for other devices to turn the page.
- It can replace the Up and Down keys of the computer keyboard, or for other devices to turn the page.
- It can replace the Page Up and Page Down keys of the computer keyboard, or use for other device.
- It can function as the Space key and Enter key.
- It can be used in multimedia software to switch between the Previous song and the Next song.
- It can use to swipe left and right on you, Android phone.
- It can use to swipe up and down on your Android phone.
Attentions
Power supply:
Please make sure to use the correct SV ± 10% power adapter k1 charge this
product. The maximum of working voltage must be less than 6V. otherwise. It
may cause equipment damage. Please turn off the device when you do not need to
use this product or when there is thunderstorm.
Electrlc11I Interference:
Electromagnetic waves such as radios and televisions , may cause interference
to this equipment, so please stay away from equipment that generates large
electromagnetic. waves as much as possible.
Placement:
In order to prevent deformation, discoloration end other damages to this
product. please avoid the following situations:
- A. heat source
- B. magnetic field
- C. direct sunlight
- D. high temperature and humidity
- E. high humidity
- F. dusty or dirty place
- G. strong vibration or shaking
Side Panel
Power switch.
Power Indicator: Dur1ng charging, the indicator will Stay red. When the battery Is normally using, or fully charging, the indicator will go off.
Type-C Jack:
It can use for charging. you can use a cable to connect n to Computer, then It
can turn the pages or view the pictures, it can control some software of
computer etc.
TRS output Interface:
When the power switch in OFF, you can use e cable with stereo or mono 1/4.
{6.5mm), connect TURNER to other product. Than the TURNER can send the signal
of “‘Momentary Switch”.
Front Panel
FCC Warning
FCC Warning Statement Changes or modifications not expressly approved by the
party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply wilt, the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. . These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed end used in accordance with the instructions, may
cause harmful Interference to radio communications. However, there Is no
guarantee that Interference will not occur In a particular installation. If
this equipment does cause harmful interference lo radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet General RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation.