LeonLite NebulaBeam 4-Heads Spot Lights User Manual

NebulaBeam 4-Heads Spot Lights User Manual

DOWNLOAD LITEDGE APP

https://leonlite.com/litedge-help

PACKAGE CONTENT

PRODUCT FEATURES

IMPORTANT SAFETY INSTRUCTIO

• Most electrical accidents are caused by a lack of understanding of electrical installation. Using basic knowledge of electricity, carefulness, and airing on the side of caution, you can safely take on many household electrical repairs. Here are some basic guidelines for working with electricity.
• Before you begin to work on a circuit, it is important to go to the main service panel and remove the fuse or trip the breaker that controls that circuit. Place a sign on the panel that warns others that the circuit is being worked on and that they should not turn it on or engage with if.
• Before touching any wire, use a voltage tester to make sure it’s not live.
• Whenever you check for voltage in a receptacle, check both outlets – each may be controlled by a separate wiring circuit.
• When replacing fuses, turn off the main power first. Make sure your hands and feel are dry and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
• Use tools with insulated handles and ladders made from wood or fiberglass.
• To protect children, place safety covers over any unused outlets. When unplugging a power tool or appliance, pull on the plug, not on the power cord. Improperly used extension cords are a leading cause of electrical fires. They are for temporary use only -do not use them to extend a circuit permanently.
• Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
• Never disable grounding devices. Make sure that all appliances requiring grounding are properly grounded. and that the electrical system itself is properly grounded.
• Meet or exceed all electrical code requirements Ihol cover the work you are doing.
• Always work with enough light to see what you are doing it’s easy to make mistakes when you’re working in dim light.
• When in doubt about the safety of any electrical repair or test, call in a professional.

INSTALLATION

1. Turn off the main power switch before installation.
2. Place the mounting plate between the light and the ceiling, and connect wires.
3. Fasten the mounting plate to the electric box with screws.
4. Hold the light close to the mounting plate, align all L-shaped notches (4) to the pre-installed screws, then slide it to lock in place.
5. Secure the light with screws
6. Adjust the direction of track light heads for the best illumination results.
7. Flip the switch to bring your light back to life.
8. Keep an eye out – when it starts blinking, you’ll know that it’s ready for a connection with your smartphone. If not, cycle the power OFF-ON five times and watch as everything resets itself into pairing mode.
9. Link to online quick start guide. www.Leonlite.com/contact
   https://leonlite.com/litedge-help

Leon
Product innovation has always been a crilical driver of LEONLITE’s business. In a highly competifive industry, we constantly shrive fo develop new products flat offer homeowners Unique advantages in farms of style, installation, and energy efficiency. In addifion, our products meet the industry’s strictest safety and performance standards to ensure product quality.

DOWNLOAD LITEDGE APP

https://a.smart321.com/litedge

Note Allow Access to Bluetooth

PRODUCT FEATURES

WARNING & DISCLAIMER
Proper setup of his device requires biinking lighs. Please fake precaufions during the acfivation process. and avoid direct eye contact with or placing a cover over freight unfi successful pairing is complefe foo prevent pofential discorfort or phofosensifive seizure.

SINGLE LIGHT PAIRING AND CONNECTION

MULTIPLE LIGHTS PAIRING AND CONNECTION

TROUBLESHOOTING

FEARURED

Group-Control Multiple Lights

To pair the remote with your light, press and hold the top-left button for five seconds. If there s difficulty in establishing connectivity between them, switch off then reactivate the light before trying again.

Light Lost Connection with Remote/ Reset Remote

  The light connects to the App successfully but fails to connect to the remote.

To initiate a remote reset, pawer on the light and simultaneously press down “ON” and “Brightness – buttons for five seconds.

Ensure a successful pairing of your remote, powering down and back on the light, then pressing and holding the ON button for five seconds.

Control Multiple Lights with a Remote
Need to command multiple ights at once? With a few simple steps, you could easily create an effcient

1. To initiate a remote rest porresion the lights snd simultaneous press down “ON” and “Brightness -” buttons for five seconds. Ensure a successful pairing of your remote, powering down and back on the light, then pressing and holding the ON button for five seconds.   If one of the lights in your group i disconnected, there are steps you can take to easily re-establish connection.

Method 1: Reset and pair the disconnected light individually (effcient but may require professional knowledge).
Method 2: Reset and pair the whole system (easy but maybe time-consuming)

FREQUENTLY  ASKEDQUESTIONS

LeonLite Product innovation has always been a critical driver of LEONLITE’s business. In a highly competitive industry, we constantly strive to develop new products that offer homeowners unique advantages in terms of style, installation, and energy efficiency. In addition, our products meet the industry’s strictest safety and performance standards to ensure product quality.

TORCHSTAR CORP
LeonlLite LITEdge
5768 Milliken Ave, Suit A Eastvale, CA 91752
Questions or Comments 1-800-990-7688
infoeleonlite.com
wwwleonlite.com
©2022 TORCHSTAR CORP
Allights reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>