Minfeng B0CMQSZM3X Retractable Ceiling Fan with Lights and Remote Control Instruction Manual
- June 14, 2024
- Minfeng
Table of Contents
Minfeng B0CMQSZM3X Retractable Ceiling Fan with Lights and Remote Control
SAFETY INFORMATION
- Before connecting the power supply, make sure that the power supply used matches the specifications of the ceiling fan.
- All wiring must comply with national and local electrical codes ANSI/NFPA70.lf you are not familiar with wiring, please use a qualified electrician.
- To reduce the risk of fire or electric shock, turn off the power to the fuse box or circuit breaker before installing the fan.
- To reduce the risk of personal injury. attach the fan directly to the building’s support structure and ensure that it can accept at least 50 pounds(23kg).
- Make sure that the installation location allows the fan blades to rotate without obstacles.
Installation Location
- Do not install the fan with wet hands.
- Do not insert foreign objects between the rotating fan blades.
- Do not bend the fan blades when installing or cleaning the fan.
- Do not disassemble or modify this product or use non-original parts without permission.
- Keep children away from your working area.
- Properly dispose of the fan’s packaging material.
- Make sure the ceiling fan is firmly secure to the ceiling. Double check all connections before you restore power.
- Turn off the fan and wait for the blades to stop completely before performing any maintenance or cleaning.
PRE-INSTALLATION
Tools Required(Not Included)
-
Power Drill
-
Screwdriver
-
Step Ladder
-
Wire Stripper
-
Electrical Tape
Parts List
-
main body
-
lamp-shade
-
mounting bracket
-
big expansion screw
-
self-tapping screw and washer
-
short extension tube with head
-
long extension tube
-
big canopy
-
small canopy with pad
-
motor driver
-
remote control
-
bracket for remote control
-
installation screws for remote bracket
-
LED driver
-
balance pad
-
main instruction manual
These accessories are already installed on the main body -
R-shaped pin
-
locking rod
Installation procedure:
Installation of mounting bracket ③
A. To install this product on a concrete ceiling, decide a suitable distance between the two drilling holes based on the mounting bracket ③, then drill two 8 mm holes and drive in the big expansion screws ④, then fasten the mounting bracket to the ceiling.
B. To install this product on a wooden ceiling, press the mounting bracket onto the ceiling and just simply lock on those four sets of self- tapping screws and washers ⑤.
Installation of ⑥, ⑧, ⑨
A. Before this installation, you should decide to choose to use the short extension tube or the long extension tube. As the short extension tube is already assembled with the head, if you want to use the long one, you need to dismantle the short extension tube from ⑥ and replace it with the long extension tube ⑦.
B. First, put big canopy ⑧ and small canopy with pad ⑨ onto short extension tube with head ⑥. During this, please pay attention to the direction of ⑧ and ⑨. The big opening of ⑧ should be toward the head of ⑥, and the black washer side of ⑨ should be toward the head of ⑥.
C. Remove R-shaped pin⑰ and locking rod⑱ from ①,lead the wires ① on through ⑥, and assemble ⑥, ⑧, ⑨ onto the central tube of ① .During this, first align the holes on ⑥ with holes on central tube well and insert the ⑱ and then lock it with ⑰ The wires inside the central tube may stop the insertion, then you may need some minor adjustment of the wire’s position to manage it.
D. Tighen up the two screws on central tube of① E. Push down the small canopy with pad ⑨ to the bottom of ①.
Assembling the lamp shade ② to the main body ①.
A. Connect the wires of LED driver ⑭. On the LED driver, the blue(live)/brown(neutral) wire should be connected to the blue (live)/white(neutral) wire on main body separately. The white terminal block should be connected to LED light source disk. The red terminal should be connected to the terminal from the loudspeaker. All these done, make sure to attach the LED driver ⑭ to the nickel-plated metal plate by those two magnetic feet so that it won’t drop down during usage.
B. Carefully align the lamp shade with lamp body ① Turn the lamp shade ② clockwise until the protruding point of lamp shade ② slide into the notch of lamp body ① Do not over stretch it. Double check it’s securely locked into place.
Carefuluy align the lamp shade ② to Lamp body ①
Installation of main body to mounting bracket ③
Hang the head of ⑥ onto the mounting bracket ③. To do this correctly, you need to align the rib on ③ with the groove on ⑥, making sure this rib completely sits into the groove. Otherwise the motor driver ⑩ may not be able to fit into the mounting bracket ③ in the following installation.
Note:
The screws on the hanging ball must be fully tightened, otherwise it will shake and cause safety hazards.
Wiring the motor driver
A. Put the motor driver ⑩ into the mounting bracket ③. Tidy up the wires so it’s more convenient for wiring. on the motor driver, the black (live)/white (neutral) wire pair is for input power supply; the blue (live)/white (neutral) wire pair is to be connected with blue and white wire from the main body separately. The white terminal is for the white terminal on the main body . After all these wiring, please remember to connect the yellow/green wire from the head of ⑥ to the earthing wire of your power supply.
B. Keep the antenna wire outside big canopy ⑧ to ensure good signal
transmission of the motor control.
C. Arrange the wiring appropriately inside the mounting bracket ③ so that
it’s convenient to fix on the big canopy ⑧.
Now you’ve finished the installation of this product. Congratulations!
Next we need to learn the details about the fan control, music control and
light control modes.
Remote control:
Basically, the remote control can control different fan working modes, the light’s power supply and the light temperature. It can’t control light color or music play.
OFF: main switch to turn on/off power supplier for the whole product;
on/off: turn on/off the light and change light temperature among cold, neutral
and warm three modes;
Fan forward rotation/ switch on fan/fan backward rotation function
Fan speed / fan off/ pair code
Timer for fan working times, 1hour/2hours/4hours
Product Feature
Natural Wind
Using aerodynamics, this ceiling fan light can produce natural, pleasant,
comfortable and healthy wind to your rooms and indoor areas. With its three-
dimensional circulation air supply, it can circulate your indoor air and
adjust the room temperature quickly. Thanks to its unique positive and
negative air supply and speed regulation technology, people can enjoy the cool
feeling in hot summers and the warm environment in cold winter. It just helps
to create a more pleasant house.
Best Partner of Air Condition
It can solve the short comings of slow diffusion of air conditioning. In hot
days, using the forward rotation function of this product it can accelerate
the diffusion of cold air, so that the indoor temperature will drop rapidly;
On the contrary, the reverse rotation function can accelerate the spread of
the heat and increase the indoor temperature quickly. This product can shorten
the cooling and heating time of air conditioner and save about 30% of
electricity consumption. It is the best partner of air condition.
Utra Silent and Energy Saving
Coupled with high-quality and efficient bearings and advanced frequency
conversion technology, the motor of this product is composed of permanently
magnetic rotor and 100% copper winding stator. All these factors make it run
efficiently, quietly and smoothly.
Thank you for purchasing our company’s ceiling fan lights .
Please read this instruction manual carefully before installation and keep it
for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>