Tivoli Audio M1BTSLC Bluetooth AM/FM Radio Owner’s Manual
- June 6, 2024
- Tivoli Audio
Table of Contents
Tivoli Audio M1BTSLC Bluetooth AM/FM Radio Owner’s
Important Safety Instructions
- . Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufac- turer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Operate this product only from the type of power source indicated on the rear panel. For products using an external power supply, use an exact replacement if lost or damaged. For products operating from battery power, refer to the user manual.
- Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- When the power supply cord or plug is damaged
- If liquid has been spilled or objects have fallen into the product.
- f the product has been exposed to water or rain.
- If the product does not operate normally by following the operating instructions.
- If the product has been dropped or damaged in any way.
- . When the product exhibits a distinct change in performance.
- When replacement parts are required, be sure your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
- Upon completion of any service, ask the service technician to perform safety checks to confirm the product is in proper operating condition.
- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- The recommended operating temperature range is 5ºC to 40ºC (41ºF -104ºF).
- The 12 VDC input is suited for operating this product in a boat or camper using an optional 12 VDC, 1 A fused adapter.
- . Keep this product a safe distance away from naked flame, such as a lit candle.
- WARNING – The mains are not disconnected in the off position, but the circuits are de-powered.
- Canada complies with RSS210, ICES-003.
- The power cord plug serves as the disconnect device and should remain readily accessible.
WARNING: THE AFFIXED MODEL ONE BT ANTENNA IS NOT INTENDED TO BE DETACHED. This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority. The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.\
Model One BT Instructions
Congratulations on your purchase of the Model One BT table radio. With the
addition of Bluetooth wireless technology, you can stream your music
wirelessly to the Model One BT.
We know you are eager to use your new radio, but please take a moment to read
this owner’s manual and Safety Instructions. If you have any questions, please
do not hesitate to contact your dealer or Tivoli Audio. Please save the carton
and original packing should you ever need to ship your radio, as shipping
damage is not covered by the factory warranty. On behalf of all of us, thank
you for choosing Tivoli Audio and enjoy your new Model One BT radio.
Packed with your Model One BT you should find one each:
- External Power Supply and accompanying plugs
- FM Telescopic Antenna
Please contact your dealer or Tivoli Audio if any of these items are missing.
Guide to Features (Front)
VOLUME KNOB:
Rotate the volume knob to the right to increase the volume or to the left to
decrease the volume. This knob also controls the volume of the headphone
output.
OFF/FM/AM/AUX KNOB :
Turn the knob one click to the right to hear the FM band, two clicks to the
right to hear the AM band, or three clicks to the right to select the
auxiliary input. To activate Bluetooth, switch to the Auxiliary position and
follow the steps outlined in the “Bluetooth Operation” section.
TUNING KNOB:
Rotate the analog tuning dial to the right or to the left to adjust the FM
(upper half of dial) or AM (lower half of dial) frequency range.
TUNING INDICATOR:
Brightest when best tuning has been achieved. Some listenable AM stations
will not light the tuning indicator and should be tuned by ear for the
clearest signal. This light may or may not remain lit when in the AUX position
depending upon the position of the AM dial.
POWER INDICATOR :
Glows when the source knob is in any position other than Off.
Guide to Features (Rear Panel)
12VDC/1.5A:
This input is for use with an optional 1.5A fused, 12VDC adapter, for
operation in a boat or camper. The connector must be 5.5mm/2.1mm center
positive.
FM ANTENNA SWITCH:
Switch between internal and external FM antennas. This switch has no affect on
AM reception. In some cases, FM reception may be improved by setting this
antenna switch to External.
EXTERNAL FM CONNECTION:
When listening to FM, depending on your country, slide the included wire
antenna over this F connector, or adjust this telescoping antenna and position
it for best reception. In strong FM signal locations, reducing the antenna’s
length may provide better reception. When the unit is not in use or when
listening to AM, keep the antenna retracted to pro-tect it. This antenna has
no affect on AM reception. For more, see the section marked “Reception”.
EXTERNAL AM CONNECTION:
In some cases, AM reception may be improved by connecting an external AM
antenna (not included) to this jack, which accepts a 3.5mm male stereo mini
connector. For more, see the section marked Reception.
HEADPHONE OUT :
Connect a headset (not included) to this variable stereo output for private
listening. The headset will mute the primary speaker. The headset’s volume is
adjusted using the volume knob. This stereo output accepts a 3.5mm stereo male
mini connector. Avoid using headphones at high volume levels to prevent
possible hearing damage.
AUX IN :
To hear audio from another device, such as a CD player, MP3 player, or
computer, connect said device’s audio output to this stereo input and switch
the front source knob to Aux. Switching to the Aux position does not turn on
the connected device. This stereo input accepts a 3.5mm stereo male mini
connector. The left and right stereo signal is summed to mono. The AUX IN jack
is unavailable when a Bluetooth device is connected. You must first disconnect
any Bluetooth device to use the wired AUX IN function.
NOTE : You may need to adjust the volume level differently for an auxiliary device than the level used for radio listening.
REC OUT :
You can record from the Model One BT radio by connecting a cassette deck’s
audio input (or another recording device) to this fixed level stereo output.
You can also use the Model One BT radio as a high performance analog tuner by
connecting it to the audio input of a preamplifier or integrated amplifier.
The primary speaker will not be muted when using this output. This jack
accepts a 3.5mm stereo male mini connector.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth and your device is not connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
- Turn on the Model One BT to the Auxiliary position. This will power on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the volume on the source device (the device you are streaming from).
- Turn on the Bluetooth wireless technology on your enabled device.
- Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate search-ing. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to “Connected”.
- You will hear a ring tone from the Model One BT confirming connection and you can begin playing your music files wirelessly. Adjust the volume level on your device. You should not have to pair your device again. Depending on your device, you may need to make multiple attempts at Pairing and/or Connecting to the Model One BT, but please give your device adequate time to Pair or Connect before repeating the process.
Placement
Place the unit on a flat, stable surface. Do not block the bottom bass port. The Model One BT radio is not video shielded and should be kept at least 12.7 cm away from a computer monitor or television. The Model One BT radio can be positioned vertically as well as horizontally. Placement in a bookcase, cabinet, or close to walls or corners may inflate the bass.
Cleaning
Never use any harsh cleansers or solvents on your radio. Avoid spray-on waxes.
Unplug the Model One BT radio prior to cleaning. The face may be cleaned with
a slightly damp, soft cloth. Painting or staining the wood cabinet will void
your warranty.
NOTE : Tivoli Audio cabinets use real wood veneers. Since natural wood
varies greatly, it is not possible to achieve an exact wood color/grain match
between models. You may also notice the wood darken over time with exposure to
sunlight. Again, this is normal for real wood limited
Warranty
Tivoli Audio manufactures its products to very high standards and we are
confident our products will perform well. Accordingly, we warranty our
products against manufacturing defects in material and workmanship to the
original owner, for a period of one year in the United States and two years in
the European Union from the original date of purchase. For countries where
minimum warranty terms are determined by statute, the warranty term is the
statutory period required. In all other locations, the warranty term is one
year. This warranty does not extend to damage caused by improper installation,
faulty ancillary equip-ment, modifications, unauthorized repair, shipping
damage or loss, abuse, accidents, use on improper voltage/current, lightning
or other acts of God, normal wear and tear, commercial use, or purchase from
unauthorized dealers. Proof of purchase as evidence the unit was purchased
from an authorized dealer within the warranty period may be required for
warranty service. Should service be necessary, please do NOT return the
product without first contacting your dealer or Tivoli Audio. This warranty is
non-transferable. Tivoli Audio will not pay for loss of time, inconvenience,
loss of use of the product, or damages caused by this product. This warranty
gives you specific legal rights and you may also have other rights which vary
from state to state. Some states do not allow limitations on implied
warranties or the exclusion of consequential damages, therefore, these
restrictions may not apply to you.
For more warranty information please visit us
atwww.tivoliaudio.com
For European warranty information please
visitwww.tivoliaudio.eu
Specifications
- Model :
- Model One BT™
- Type :
- AM/FM mono table radio with Bluetooth wireless technology
- Driver :
- One 76.2 mm (3″) full-range driver
- Dimensions :
- 21.3 cm W x 11.4 cm H x 13.3 cm D
- (8.375″ W x 4.5″ H x 5.25″ D)
- Weight :
- 1.88 kg (4.14 lbs)
Specifications subject to change without notice. Tivoli Audio reserves the right to make product changes without notice. Tivoli Audio, the Tivoli Audio logo, and Model One BT are trademarks of Tivoli Audio, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Tivoli Audio is under license. Other trademarks and trade names are those of their respective owners.