Maisto PKG82650RC Bluetooth Powerracer Instruction Manual
- June 15, 2024
- Maisto
Table of Contents
Maisto PKG82650RC Bluetooth Powerracer
Charging your Bluetooth Car
- Open the charging port cover on the vehicle.
- Make sure the switch is in the OFF/CHARGE position before charging.
- Locate a USB-certified port from any of the devices shown here.
- Connect the USB charging plug with the USB-certified port.
- The LED indicator will start lighting in red to show it is charging.
- Once the LED indicator turns off, the vehicle is fully charged.
- Detach the USB plug from the USB-certified port, then install the charging port cover on the vehicle.
Connect to the car
- Open the «Maisto TECH» App on a mobile phone.
- Turn on the power switch on the vehicle and turn on the Bluetooth button on the phone, then click START to select the vehicle model to match the signal The “Power LED” on the vehicle will flash for less than 3 seconds and then stay on, meaning the automatic signal matching between the vehicle and the phone is completed.
Wheel Alignment
If the vehicle does not run in a straight line, adjust the wheel alignment under the chassis.
Performance Tips:
- Do not drive the vehicle on grass, or sand, or go through water.
- Do not drive the vehicle in windy or rainy weather.
- Do not drive the vehicle into any hard object.
- Keep fingers, hair, and loose clothing away from the vehicle.
- The operating range can be affected by a variety of factors:
- a) Weak controller or vehicle batteries.
- b) Interference from other items that emit radio frequency signals such as another R/C item on the same frequency, CB radios, cordless phones, high voltage transmitters, etc.
- Outdoor usage is recommended to get optimal control range.
- Remove the package, take out all accessories, and assemble the product before giving it to children to play.
- Only the supply USB cable should be used to connect the toy.
Cautions:
- The Built-in rechargeable battery must be charged before use.
- Do not overcharge the Battery.
- Do not charge the battery if it shows leakage, corrosion, or has loose or exposed wires or other damage.
- Do not cover the vehicle with any sort of material while charging.
- Do not touch the vehicle when it is hot. Wait until the vehicle cools before recharging.
- Do not dispose of the Battery in the fire.
- Do not dismantle the Battery or USB, and do not cut the Battery or USB cables.
- The USB Cable used with the toy shall be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired.
- The USB cable is not a toy.
- The Battery will be warm after charging, and hot after use in a Vehicle.
- Rechargeable batteries are only to be charged by adults or by children at least 8 years old.
Bluetooth R/C
Age 6+
- Please keep this owner’s instruction manual for future reference.
- It contains important information.
- We reserve the right to improve/revise the product specifications without notice.
- Class 1 LED Product
Contents
- RC Vehicle With Built-in Rechargeable Battery (3.2V 100mAh / non replaceable) x 1
- USB Cable × 1
- Cones x2
- Owner’s Instruction Manual x 1
- Download the «Maisto TECH» APP
- Scan the QR Code Or search for the «Maisto TECH» APP in the App Store or on Google Play and download the app to your smartphone or tablet.
- Follow the instructions for enabling Bluetooth in the smartphone settings and start up the App
Disposal of batteries
- Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold.
- You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:
- Pb = Battery contains lead
- Cd = Battery contains cadmium
- Hg = Battery contains mercury
- FCC Label Compliance Statement:
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions :
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-210 Compliance Statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may lianc cause undesired operation of the device.
This device contains lic Innovation, Science an Maisto International, Inc., Fontana, CA 92336, U.S.A. Operation is subiect to