OLIGHT Odiance Multi Use Work Light User Manual
- June 4, 2024
- OLIGHT
Table of Contents
USER MANUAL
Odiance
Thank you for purchasing this OlightProdixt. Please read this mama I carefully
tetra use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
WHITE LIGHT MODE
HIGH
LOW
YELLOW LIGHT MODE
HIGH
LOW 
| HIGH| LOW
---|---|---
White eight Mode| 75| 20
Yellow UgM Mods| 70| 18
1.500cd
08m IPX5 (L)222(W)76(H)188mm
(L)8.74(W)2.99(H)7.4in 1607g/58.90z
(Including the Ordinance-Rc
REMOTE CONTROL DISTANCE The isles 510M
All above specifications are test results based on ANSI/NEMA FL1-2009
Standard. The tests are performed indoors under a room temperature of 25
degrees celsius with windless conditions. The runtime may vary depending on
the external temperature and ventilation conditions, and these biases may
affect the results of testing.
PRODUCT OVERVIEW
HOW TO RECHARGE
Please charge the product before first use. Connect one end of the provided
USB-C cable to an external USB-C power source (power adapter not included),
open the silicone dust plug that shields the USB-C charging port, and then
insert the other end of the cable into the USB-C charging port. 
BATTERY LEVEL:
NOTE: Use a 30W or higher USB power source for the fastest charging possible. When charging with a USB power source that is less than 30W, charging times will be extended.
BATTERY LEVEL INDICATOR
When the product is turned on or discharged, the battery-icon indicator displays the remaining battery level.
Replace Remote Controller Battery
INSTALLATION
NOTES:
- The remote control only supports one-to-one control. One-to-many control may cause it to work improperly.
- After being turned off for 48 hours, the product will enter sleep mode, which will cause the remote control to stop working. You can turn the product back on again with the power rotary knob.
- You can control the product with the remote controller and rotary knob simultaneously.
- If the remote control fails due to misoperation, please pair again following the operating instructions.
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the product when it is on. The heat built-up may cause close objects to burn or even result in unexpected disasters.
- if the product goes hot, please DO NOT place it in a backpack, fabric bag, or fusible plastic container.
WARNING
- DO NOT store the product in the car or other places where the temperature may exceed 60 C.
- DO NOT disassemble the product.
- DO NOT immerse the product in liquid, which may damage it.
- Fully charge the battery before storing the product for a long period of time
- DO NOT use it nearby open flames.
NOTICE
- When the charging port is not in use, keep the port dust cover closed to prevent the entry of dust or other foreign matters
- Please charge the product with a 30W or higher-capacity USB-C power adapter to achieve the fastest charging possible.
- Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
- The brightness level will be capped at 30% if the battery is lower than 40%
- The high mode will stay on for 10 minutes and then steps down to a 50% brightness level within 5 minutes.
- The maximum brightness level is capped at 30% in the charging state.
EXCLUSION CLAUSE
(Hight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
HOW TO OPERATE LEFT ROTARY KNOB (POWER) ON/OFF: Rotate the knob clockwise
to turn on or counterclockwise to turn off. Stepless Adjustment of Brightness:
While the light is on, rotate the knob clockwise to increase brightness or
counterclockwise to decrease brightness.
RIGHT ROTARY KNOB (COLOR TEMP.) Change Color Temperature: While the light
is on, rotate the knob clockwise to decrease the color temperature or
counterclockwise to increase the color temperature.
Note: The color temperature ranges from 2700K to 6000K within 10 levels.
Each position of the rotary knob corresponds to one level.
REMOTE CONTROL
Single press to turn the light on or increase the brightness by one level
(10 levels available). Long press for 1 second to access the brightest setting
directly.
Single press to turn the light off or decrease the brightness by one level
(10 levels available). Long press for 1 second to turn it off directly.
While the light is on, a single press to increase the color temperature by
one level (10 levels available) until it reaches 6,000K. Long press for 1
second to reach 6,000K directly.
While the light is on, a single press to decrease the color temperature by one
level (10 levels available) until it reaches 2,700K. Long press for 1 second
to reach 2,700K directly.
Remote Control Pairing: For the remote controller, press and hold the ON
and OFF simultaneously for 1S , and its red indicator will flash at 1Hz to
enter the pairing mode; For the light, after being turned off, please complete
the following steps within 5 seconds: quickly rotate the color temperature
rotary knob clockwise for 3 positions, counterclockwise for 3 positions, and
then clockwise again for 3 positions to enter the pairing mode. If pairing
successfully, the light will quickly flash twice. If not, it will exit the
paring mode after 5s.
Remote Control Operation: Before controlling, please turn on the light.
And then, the on/off state and color temperature can be adjusted with the
remote controller.
OLIGHT TECHNOLOGY CO., LTD.
Documents / Resources
|
OLIGHT Odiance Multi Use Work
Light
[pdf] User Manual
REMOTECONTROL, 2A3J6-REMOTECONTROL, 2A3J6REMOTECONTROL, Odiance Multi Use Work
Light, Multi Use Work Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>