TECNO SC01P True Wireless Earbuds User Manual

June 15, 2024
TECNO

TECNO SC01P True Wireless Earbuds

Product Information

  • The True Wireless Earbuds, model name SC01P, is a wireless earphone product manufactured by TECNO MOBILE LIMITED. It is designed to provide a convenient and high-quality audio experience for users.

Specifications

  • Bluetooth Left: 4.27dBm
  • Bluetooth Right: 4.59dBm
  • BLE Left: 4.00dBm
  • BLE   Right: 3.88dBm

Compliance
The True Wireless Earbuds comply with the essential requirements and regulations of directive 2014/53/EU. It has undergone testing and meets the following standards

  • Radio: ETSI EN 300 328 V2.2.2 (2019-07), Article 3.2
  • EMC: EN 301 489-1 V2.2.3(2019-11), Article 3.1(b), Draft ETSI
  • EN 301 489-17 V3.2.5 (2022-08)
  • Safety: EN IEC 62368-1:2020+A11:2020, Article 3.1(a)
  • Health: EN 62479:2010&EN 50663:2017, Article 3.1(a)

EU Type Examination Certificate

  • An EU Type Examination Certificate for this product was issued in accordance with Annex III (Module B) of the 2014/53/EU Radio Equipment Directive by Bay Area Compliance Laboratories Corp. (Notified Body Identification Number 1313).

Product Usage Instructions

Charging the Earphones

  1. Open the charging case lid.
  2. Insert the earphones into their respective slots in the case.
  3. Close the charging case lid.
  4. The earphones will automatically power off and start charging.

Pairing with a Device

  1. Ensure that the earphones are charged and removed from the] charging case.
  2. Activate Bluetooth on your device.
  3. Open the Bluetooth settings on your device and select “TECNO True Wireless Earbuds” from the list of available devices.
  4. The earphones will pair with your device, and you can start using them for audio playback

Controlling Playback
The earphones have touch controls for managing playback

  • To play or pause audio, tap once on either earphone.
  • To skip to the next track, double-tap on the right earphone.
  • To go back to the previous track, double-tap on the left earphone.
  • To adjust the volume, swipe up or down on either earphone.

Answering Calls
When a call comes in while using the earphones, you can answer it

  • To answer a call, tap once on either earphone.
  • To end a call, tap once on either earphone again.

FAQ

  1. Q: How long does it take to fully charge the earphones?
    A: The charging time may vary, but it typically takes around 1-2 hours to fully charge the earphones.

  2. Q: How long can I use the earphones on a single charge
    A: The earphones provide approximately 4-6 hours of playback time on a single charge, depending on the volume level and usage.

  3. Q: Can I use only one earphone at a time?
    A: Yes, you can use either the left or right earphone individually if desired. Simply remove the desired earphone from the charging case and pair it with your device.

PACKAGE CONTENT

  • 2* SCOl Bluetooth earphones
  • SCOl charging case
  • Charging cable
  • User Manual
  • 2* Large ear tip
  • 2″ Medium ear tip (In the charging case )
  • 2° Small ear tip

TECNO-SC01P -True-Wireless-Earbuds-1

PRODUCT OVERVIEW

  1. Charging case
  2. Earring case
  3. Charging case indicator light
  4. Charging port
  5. Earphone indicator light
  6. Earphone touch area
  7. Earphone charging contacts
  8. Ear tip

TECNO-SC01P -True-Wireless-Earbuds-2

THE POP-UP WINDOW SUPPORTS THE FOLLOWING TECNO PHONES

TECNO-SC01P -True-Wireless-Earbuds-21

BASIC FEATURES OF PRODUCT

TECNO-SC01P -True-Wireless-Earbuds-22

EARPHONE INDICATOR LIGHT

TECNO-SC01P -True-Wireless-Earbuds-23

CHARGE

TECNO-SC01P -True-Wireless-Earbuds-3

EARPHONE, 2 WEARING STYLE

TECNO-SC01P -True-Wireless-Earbuds-4

Software Function Description

  • Scan the code to download We life App and use more functions.
  • Customization of EQ mode, noise cancellation mode, touch key function and in-ear detection, as well as upgrade of earphone firmware, etc. are supported. Only available on Android phones)
  • pair of earphones with multiple EQ modes Various
  • EQ modes: Bass Booster, Treble Booster, Vocal Booster, Default. Choose the style that suits you best.

Earphone Touch Key Customization

  • With free customization of functions triggered by earphone touch keys, keep one step ahead of others in answering calls and controlling music.
  • When wearing the earphones on both sides, tap and hold the touch area of earphones to switch in a cycle of “Off/Transparency/Noise Cancellation”.
  • A quick cycle switch between “Noise Cancellation/Transparency” can be set in We life App, as shown in the right figure.TECNO-SC01P -True-Wireless-Earbuds-7 TECNO-SC01P -True-Wireless-Earbuds-9
  • Create your own music EQ according to your audition.TECNO-SC01P -True-Wireless-Earbuds-10

WARRANTY TERMS & CONDITIONS

  • A limited 6-month warranty applies to TECNO SCO1 purchased from the Tecno-Mobile-Official store.
  • Please feel free to contact us if you run into any problems.
  • This warranty covers only original TECNO products.
  • It does not apply to normal wear and tear, or any effects or damage caused by misuse of the product.
  • The warranty is for primary products only. Additional or free of cost products are not covered under warranty.

TECNO MOBILE LIMITED

  • TM and ©2022 TECNO Corporation.
  • All rights reserved. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. Specifications are subject to change without notice.
  • Model names and the availability of particular products may vary by region.

TECNO-SC01P -True-Wireless-Earbuds-11

TECNO-SC01P -True-Wireless-Earbuds-24

POWER ON/OFF

  • Power on
  • The earphones will be power on automatically while open the charging caseTECNO-SC01P -True-Wireless-Earbuds-12
  • Power off
  • Put the earphones into charging case and close it, the earphones will be power off automaticallyTECNO-SC01P -True-Wireless-Earbuds-13

CONNECT SMART DEVICES

Connect smart devices in dual earphone made

  • When first using, open the case, the earphones will enter into TWS pairing mode (when power on, the white light flashes IS and then white light flash quickly on both earphones)
  • The L & R earphones will connect with each other successfully in 3S, then enter into pairing mode, the master earphone flashes blue and white light alternatively, and the slave earphone light goes off
  • Please search and connect with the “TECNO Sonic 1 Pro”, and both of the earphones light will go off when pairing successfullyTECNO-SC01P -True-Wireless-Earbuds-14

CALL MODE

  • L/R earphone operationTECNO-SC01P -True-Wireless-Earbuds-15

VOLUME+/VOLUME

  • B L/R earphone operation

MUSIC MODE

  • B L/R earphone operationTECNO-SC01P -True-Wireless-Earbuds-17

ACTIVATE THE VOICE ASSISTANT

  •  L/R earphone operation

FCC CAUTION

  • Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Device types: SC01P (FCC ID: 2ADYY-SC01P) IMPORTANT NOTE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

  • These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

  • If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • Hereby, TECNO MOBILE LIMITED. Declares that this True Wireless Earbuds is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU.

CE CAUTION

  1. Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
  2. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions  disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
  3. leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of fiammable liquid or gas;
  4. a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 3.The product shall only be connected to a USB interface of version USB 2.0.
  5. EUT Temperature: 0°C ~ +45 C (Standalone).0~+40 °C (with adapter).
  6. To prevent possible hearing damage, do not listen at high volume levels for long periods. 6.USB cable is shielded.
  • OPERATING FREQUENCY BT/BLE
    • 2402-2480MHz (TX/RX);
  • MODULATION MODE GFSK, n/4-DQPSK , 8DPSK (BT) GFSK(BLE) RF OUTPUT POWER (Only for CE) BT Left
    • 4.27 dBm Right
    • 4.59dBm BLE: Left
    • 4.00dBm Right: 3.88cBm
    • Figure 1 – Warming label (IEC 60417-6044)

DECLARATION OF CONFORMITY

  • In accordance with EU Directives and Regulations
  • Company name: TECNO MOBILE LIMITED
  • Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT HONGKONG as the manufacturer hereby declares under our sole responsibility that the,
  • Product(s): True Wireless Earbuds
  • Model name: SC01P is in conformity with the essential requirements of the RE
  • Directive 2014/53/EU: Radio Article 3.2 ETSI EN 300 328 V2.2.2 (2019-07)
  • EMC
    • EN 301 489-1 V2.2.3(2019-11); Article 3.1
  • Draft ETSI EN
    • 301 489-17 V3.2.5 (2022-08)
  • Safety EN
    • IEC 62368-1:2020+A11:2020 Article 3.1
  • Health EN 62479:2010&EN 50663:2017 Article 3.1
  • An EU Type Examination
    • Certificate for this Product was issued in accordance with Annex III (Module B) of the 2014/53/EU Radio Equipment Directive by Bay Area Compliance Laboratories Corp. (2014/53/EU Radio Equipment Directive Notified Body Identification Number 1313)
  • Signed on behalf of TECNO MOBILE LIMITED [Signature of authorized person) Sincerely Yours, Signature
    • Nengyong.Wu
    • Project Manager
    • Date: 2023-04-28

CUSTOMER SERVICE

  • Carlcare provides service

WARRANTY CERTIFICATE

TECNO-SC01P -True-Wireless-Earbuds-25

Documents / Resources

| TECNO SC01P True Wireless Earbuds [pdf] User Manual
SC01P True Wireless Earbuds, SC01P, True Wireless Earbuds, Wireless Earbuds, Earbuds
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals