HEXAGON FWWSBB-37-6 Smart Hexagon Wall Light Panel User Manual
- June 15, 2024
- HEXAGON
Table of Contents
HEXAGON FWWSBB-37-6 Smart Hexagon Wall Light Panel
Features
- The product adopts a DIY intelligent splicing scheme, which can splice the shape according to customer needs.
- 16 million colors and various dream color light functions.
- The product adopts a WiFi+Bluetooth dual-mode connection. App and IR remote controllable.
- The product has six splicing interfaces, which are not direction-specific and can be DIY-connected.
- Any single panel can be an overall shape. Classic appearance, compact structure, can be spliced into different shapes, and easy to install.
Parameters
Product Function Diagram
- Stick the adhesive tape on the back of the controller and the light
- Take one connector and connect to the controller and the light, one end connects to the controller, and another end connects to any port of the light panel. Make sure the mark of the arrow always points to and connects to the next panel.
- Connect the rest of the light panels according to your designs.
- The controller connects to 24V DC power supply and 5V USB port, and checks if very light panels work well.
- Clean the surface of the installation position (such as the wall)
- Remove the release paper from the adhesive tape that has been stuck to the controller and the light body, Paste it on the wall to be installed, and press each piece of light panels tightly.
Noted
- Please don’t install the lights on the wallpaper, lime walls, or irregular walls, and we don’t recommend installing the lights on the ceiling of the room.
- If you worry that the adhesive tape is not strong enough, you can use the crew to fix the connectors on the wall.
- If you want to remove the light panels, please simply lift the light panels forcefully to disengage the connector.
Product Operation
Buttons operation
Remote controller operation
- Power supply : 3V button cell
- Control distance: 5-8 meters in open area
Remove the PVC film on the back of the remote controller before use, and press the power button before operation.
Download the APP
- Search or scan the QR code to download the APP of Smart Life” from Android 4.0 and above or IOS 8.1 and above.
- Register or log in: Register an account according to the tips of the APP, and log in to the UI of the APP.
- APP connecting: Turn on the Bluetooth of your mobile phone, then power on the light, when the light under quick flashing, open the APP and search for and add the devices. Choose the 2.4G networks and log in with correct WiFi name and password to pairing till devices added success.
Operation of the APP
You can set and adjust the brightness, colors, scenes, music mode, and timer on the UI of the APP.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>