BLAUPUNKT HOR811 Radiator Oil Filled Owner’s Manual

: June 15, 2024
: Blaupunkt

Table of Contents

BLAUPUNKT HOR811 Radiator Oil Filled
Product Information
IMPORTANT NOTES
TECHNICAL DATA
Product Usage Instructions
USING THE APPLIANCE
DEVICE CONTROL VIA APP
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLAUPUNKT HOR811 Radiator Oil Filled

Product Information

This product is only suitable for well-insulated spaces or occasional use.

Model: HOR811

IMPORTANT NOTES

Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
This device is for domestic use only. Do not use for any other purposes.
The device should only be connected to an socket with values corresponding to the values on the rating label.
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let cord hang over edge of counter, or touch any hot surface.
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
Before maintenance work always disconnect the unit from the power supply.
When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
Damage to the power cord or plug can lead to an electrocution hazard.
Never leave the product connected to the power source without supervision.
Never put the power cable, the plug or the whole device into the water or any other liquids. The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment.
Children should not play with the equipment.
Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment. Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
Never use the product close to combustibles.
Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
The power cable should be periodically checked for damage.
If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
Notice: Do not cover the device or obstruct air inlets or outlets of the heater.
Do not use in rooms below 6m².
Do not use in areas with increased humidity, bathrooms, showers etc.
Remember to maintain a 50 cm distance from furniture, curtains or other objects when using the heater.
Always turn the thermostat controller to minimum and switch the heater off before unplugging the device.
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
Do not insert objects through the safety grill or the air inlets.
This product is only suitable for well-insulated spaces or occasional use.
This radiator is filled with a specific amount of special oil.
Repairs requiring the opening of the oil tank may only be performed by the manufacturer or its service agent. Please contact the agent in the event of an oil leak.
Do not place the radiator directly under the power socket.
When discarding the radiator, observe the regulations for oil disposal. Do not dispose of the radiator with household waste. Comply with the local regulations concerning the disposal of electrical equipment and oil.
During the first use, a smell of burning might emerge within the first few minutes. This is a normal occurrence, and should quickly disappear.

Conformity
Hereby, Blaupunkt Competence Center
2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirement and other relevant provisions of Directive 2014/53/EU. Declaration
of conformity can be obtained from the product page at www.blaupunkt.com.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL DATA

Voltage: 220-240V~50Hz
Power: 2500W
Frequency band/Output power: 2400-2483.5MHz / 17.19dBm

$BLAUPUNKT-HOR811-Radiator-Oil-Filled-$2$$

$BLAUPUNKT-HOR811-Radiator-Oil-Filled-$4$$

A. Radiator body
B. Control panel
C. Base with castors
D. Handle
E. Remote-control-storage compartment
F. Main power switch
G. Cable reel
a) Power button
b) Power-/operating-mode selection button
c) Temperature-setting button
d) Timer button
e) “-” Button
f) “+” Button

Specifications

Model: HOR811
Type: Oil Heater
Voltage: 220-240V~50Hz
Power: 2500W
Frequency Band/Output Power: 2400-2483.5MHz / 17.19dBm

Product Usage Instructions

Before the First Use

Space out the feet with the castors on the radiator base according to the diagram in the Figure.
Place the radiator on a level, stable, and heat-resistant surface.

USING THE APPLIANCE

Connect the radiator to the power source. Switch the appliance on with the main power switch (F). After that, two buttons on the control panel light up: the timer and the power switch. The appliance will then be in the standby mode. Press the power switch to turn on the radiator. The radiator switches on in the Eco mode, and the target temperature is set at 23°C. Temperature changing: Press the temperature-setting button, then press the + or – buttons to change to the required temperature. After setting to the required temperature, the radiator will switch to the Eco mode. The temperature can be set within the range 5-30°C .
Note: the temperature value on the display shows the set required temperature. This is not an ambient-temperature measurement.
Changing the operating mode: To change the heating mode, press the operating-mode-selection button: The eco mode -> High power -> Medium power -> Low power. In the eco mode, the radiator adjusts the power to the ambient temperature. When one of the constant-power modes is used, the appliance will only operate at the selected power level. When the selected target temperature (default 23°C) is reached, it will switch off. When the temperature drops, the appliance will start heating again.
The eco mode: To activate the eco mode, press the operating-mode button until the eco mode is selected.
In this mode, the radiator adjusts the heating power to the ambient temperature. The smaller the difference between the required temperature and the ambient temperature the lower the power used to heat the room. If there is only one degree of difference, the radiator will operate in the low-power mode. When the difference is 3 degrees, the radiator will use the maximum power.
The radiator’s delayed-switch-on function: The radiator should be in the standby mode. Press the timer button. The hour symbol (H) and the time (0) will appear on the display. User the + or – buttons to select the expected switch-on-delay time of the radiator between 1 and 24 hours. After the selected time has elapsed, the appliance will start heating.
After setting the timer, you can set the radiator operating parameters by using the temperature-setting button or the operating-mode-selection button.
CAUTION: It is worth remembering that when using the radiator’s delayed- switch-on function, the appliance can switch on when left unattended. Always observe all the safety instructions for the product’s use.
The radiator’s delayed-switch-off function: When the radiator is operating in one of the operating modes, press the timer button. The hour symbol (H) and the time (0) will appear on the display. User the + or – buttons to select the expected switch-on-delay time of the radiator between 1 and 24 hours. After the selected time has elapsed, the appliance enters the standby mode.
Child lock: To activate the child lock, press and hold both the operating-mode-selection button and the power switch at the same time for 3 seconds. The buttons will be locked to prevent the accidental pressing of the control buttons. To unlock the control panel, press and hold both the operating-mode-selection button and the power switch at the same time again for 3 seconds.
Deactivating the audible signals when pressing the buttons: To deactivate the audible signals each time you press the control buttons, press and hold the + and – buttons at the same time for 3 seconds. To deactivate this function, press and hold the + and – buttons at the same time again for 3 seconds. Remote control: The buttons on the remote control correspond to the control panel’s buttons, and perform the same functions.

OVERHEATING PROTECTION
The radiator is protected with overheating protection which automatically switches off the appliance if it intensely overheats. In that event, disconnect the appliance from the mains, wait approx. 30 minutes for the radiator to cool down, and rectify any possible cause of the overheating, e.g., something covering the radiator. Check the appliance, cable, and plug for damage. If no damage is observed, reconnect the appliance and switch it on, according to the manual. If the radiator does not switch on, contact the customer service for assistance.

CLEANING AND MAINTENANCE
During use, clean the appliance regularly according to the following instructions.

Disconnect the appliance from the power source, and let it cool down before cleaning.
Gently clean the appliance’s external surface and control panel with a damp and lint-free cloth.
If there is dust in the appliance’s slots, it is recommended to blow it out with a vacuum cleaner or blower.
Do not use strong detergents, chemical cleaners, or solvents.

DEVICE CONTROL APP
To be able to use the app control function for your device, you must have a registered user account in the “Tuya Smart” system. You can download this application from Google Play or App Store. You can also search for it using the QR link below:

After launching Tuya Smart, the user will be asked to log in to the app or register a user account with the system.

RESETTING DEVICE SETTINGS AND CREATING A NEW CONNECTION
To connect your device to the local WiFi network, reset the WiFi connection setting. The unit should be in sleep mode (main power switch on). Press the 3 buttons simultaneously and hold for approximately 5 seconds: (mode, minus, timer). When the WiFi indicator starts blinking fast, your device will be ready to be found.
NOTE: this device only works with 2.4GHz wireless networks. The network should use WPA2-PSK encryption and AES protocol.

CONNECTING APPLICATION TO YOUR DEVICE VIA WIFI AND BLUETOOTH
Once the application has started, press the ‘add device’ button. After about 15 seconds, your device should be found. Press the button to continue adding. Select an available WiFi network and enter correct password. Press the button to continue. After a while, a message should appear that the device has been added correctly.

CONNECTING APLLICATION TO YOUR DEVICE VIA WIFI
Once the application has started, press the ‘add device’ button. In the “Add manually” section, select the product group “small appliances…” and then the product “oil heater”. Then select the available WiFi network and enter correct password. The application should disconnect from the current WiFi network, connect to the device and upload the configuration parameters. Then, the application should reconnect to the previous network. After a while, you should see a message that your device has been successfully added.

DEVICE CONTROL VIA APP

Use the + and – buttons to change your desired temperature. The App displays the actual measured temperature and the set desired temperature.

The App also offers buttons:

on/off – switches the heater on and off
mode – changes the device operating mode
other settings:
button lock
switching off the sounds
timer to set number of hours after which the unit will be started
timer to set number of hours after which the unit will be stopped
schedule to set days of week and times the unit will switch on and off.

TEMPERATURE READING AND THERMOSTAT OPERATION
The temperature sensor is located inside the panel, at its lower part. As this component heats up, the sensor reading is offset. When the device is cool or it has recently started up, the device will operate as if the surroundings were cooler. This is a normal phenomenon. The temperature reading is indicative and not fully accurate.

Power and Operating Modes
The control panel of the radiator consists of several buttons:

Power button (a): Press this button to turn on/off the radiator.
Power/Operating mode selection button (b): Use this button to switch between different operating modes.
Temperature-setting button (c): Adjust the desired temperature using this button.
Timer button (d): Set the timer for automatic shut-off using this button.
– Button (e): Decrease the temperature or timer setting.
+ Button (f): Increase the temperature or timer setting.

Safety Instructions
It is important to observe the following safety instructions:

When using the radiator’s delayed-switch-on function, the appliance can switch on when left unattended. Always observe all the safety instructions for the product’s use.
The radiator is protected with overheating protection which automatically switches off the appliance in case of overheating. If overheating occurs, wait approximately 30 minutes for the radiator to cool down and rectify any possible cause of the overheating, such as something covering the radiator. Check the appliance, cable, and plug for damage.
If you need to reset the appliance, disconnect it from the mains, wait for approximately 30 minutes, and then reconnect it to the mains. If the appliance continues to malfunction, contact the customer service for assistance.

FAQ

Q: How do I adjust the temperature on the radiator?
A: Use the temperature-setting button (c) on the control panel to adjust the desired temperature.
Q: Can I set a timer for automatic shut-off?
A: Yes, you can set a timer for automatic shut-off using the timer button (d) on the control panel.
Q: What should I do if the radiator overheats?
A: In case of overheating, wait approximately 30 minutes for the radiator to cool down and check for any possible cause of the overheating, such as something covering the radiator. If the issue persists, contact customer service for assistance.
Q: How do I reset the appliance?
A: To reset the appliance, disconnect it from the mains, wait for approximately 30 minutes, and then reconnect it to the mains. If the appliance continues to malfunction, contact customer service for assistance.

Competence Center
2N-Everpol Sp. z o.o.
ul. Putawska 403A
02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: info@everpol.pl
Website: www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 688 08 33
E-mail: sda@blaupunkt.pl
All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.