Tera Universal EV Wall Charger Station Lockable Box User Manual
- June 15, 2024
- Tera
Table of Contents
Tera Universal EV Wall Charger Station Lockable Box User Manual
Product Description
How to insert/remove a cell battery
- Insert the eject tool into the hole to eject the battery tray, as shown in figure 1.
- a (To install): Insert the cell battery with the negative side facing down, as shown in figure 2.
b (To remove)Press the notched edge to remove the battery, as shown in figure 3.
Operation Instructions
Note:
- There is a user password (1234) and a manager password (4321) by default. (Access level: Manager Password > User Password)
- here are two operation modes available: Public Mode and Private Mode. By default, the lock is in private mode.
A. Unlock/Lock
**Unlock
**
- Enter the password and press “OK” . The lock emits a long beep and the LED indicator turns solid green.
- Turn the knob clockwise within 3s.
Lock
Simply turn the knob counterclockwise
If the password is incorrect, the lock will beep three times.
If the digital lock is unlocked but the LED indicator is solid red, it means
that the battery is running low.
If the digital lock is unlocked with the manager password, the user password
will be restored to 1234.
B User Settings
Change Passwords
(For instance, change the default user password from 1234 to 123123.
Step 1: Enter the default password and then press “OK”. The lock emits a
long beep and the LED indicator turns solid green.
Step 2. Hold the “OK” key until the lock emits a long beep and the LED
indicator starts flashing green.
Step 3. Enter the new password 123123, followed by the OK key. The lock
emits along beep, indicating that the passwords has been saved successfully.
Both the user password and the manager password can be changed by the steps
mentioned above.
The shortest password is 4 digit and the longest password is 15 digit.
The manager password must not be set the same as the user password.
Once a new password is saved, the old password will become invalid
immediately.
Public Mode and Private Mode
Enable public mode
Step1. Enter the manager password and press the OK key. The lock emits a
long beep and the LED indicator turns solid green.
Step 2. Hold the “OK’ key until the lock emits a long beep and the LED
indicator starts flashing green.
Step 3. Press the “OK” key again and enter 4, 4 and then press “OK”. The
scanner emits a long beep and enters Public Mode.
Only with the manager password can this mode be enabled.
When the lock is in public mode, entering the manager password will clear the
temporary password and unlock the digital lock.
Set a temporary password (for public mode only)
Step 1. Press the “OK” key, with the LED indicator flashing green.
Step 2. Enter a password (at least 4 digits, at most 15 digits) and press
the “OK” key to confirm the operation. The lock emits a long beep and the LED
indicator turns solid green, indicating successful configuration. Once the
configuration is done, the digital lock will be unlocked.
The temporary password will become invalid once it is used to unlock the
digital lock.
If a temporary password is configured, the LED indicator will flash every
three seconds.
Disable public mode
Step 1. Enter the manager password and press the “OK” key. The lock emits
a long beep and the LED indicator turns solid green.
Step 2. Hold the “OK” key until the lock emits a long beep and the
LED indicator starts flashing.
Step 3. Press the “OK’ key and enter 4, 3 and then “OK” agian.
The lock emits a long beep, indicating that the configuration is successful
and the lock is in private mode now.
Fake Password
- Enter the manager password and press the “OK” key. The lock emits a long beep and the LED indicator turns solid green.
- Hold the “OK” key until the lock emits a long beep and the LED indicator starts flashing green, then press the “OK” key again.
- Enter 4, 2 and press the OK key to enable the Fake Password feature. Enter 4, 1 and press the OK key to disable the Fake Password feature.
- This feature allows users to add extra digits in front of and/or behind the real password so as to create a decoy or misleading input.
- The maximum size of this configuration is 16 digits. As long as the input password includes the correct group of numbers, the lock will be unlocked.
Troubleshooting
Problems | Causes | Solutions |
---|
The lock beeps three times
after a password input| Incorrect password| Enter the correct password
The lock emits two long beeps
and the LED indicator
flashes red after a password
input| Battery running low| Replace the battery
The lock emits a beep and the
LED indicator is solid green
but the lock won’t open| The knob is not at
the lock position.| urn the knob to the lock
position.
The lock doesn’t beep when
pressing the keys and the
lock opens after the password
is entered| Beeper broken| Replace the beeper
Note: If you enter the wrong password four times in a row, the l
Installation Guide for the Protective Box
Step 1 : Enter the initial password “1234”, press the “OK” key, and turn the knob clockwise to open the cover of the protective box.
Check that all the installation components are complete. The plastic bag
containing the components should include the following items: 4 wall plugs, 4
metal screws, 4 metal washers, and 1 eject tool.
Step 2: Remove the nuts and washers from the four corners of the mounting
plate marked in the picture shown above.
Step 3 : Remove the mounting plate from the fixed screws.
Step 4 : Align the holes on the box with the installation holes on the wall.
Step 5: Insert the wall plugs into the installation holes.
Step 6: Place the washers on the metal screws, pass them through the holes on the box, and insert them into the wall plugs and tighten the screws.
Note: The tools for drilling holes are not included. Users are advised to measure the size of the protective box and the desired hole size before drilling.
Please do not hesitate to contact us if you have any questions.
Important Notice:
Please include your Order Number and Product Model Number in the email
Official Customer Service
Email Address: info@tera-digital.com
Cell: +1 (909)242-8669
WhatsApp: +1 (626)438-1404
Follow us:
Instagram: tera digital
YouTube: Tera Digital
Twitter: Tera Digital
Facebook: Tera
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>