EUROtops MD812 Tiffany Lamp Instruction Manual
- June 15, 2024
- EUROtops
Table of Contents
EUROtops MD812 Tiffany Lamp Instruction Manual
INSTRUCTION MANUAL/ BEDIENUNGSANLEITUNG/ NOTICE D’UTILISATION/
GEBRUIKSAANWIJZING
This product contains a light source of energy efficiency class .
Before using the device, please read these instructions carefully and retain
them for the future reference.
DESCRIPTION
Components of the lamp :
-
Lampshade
-
Structure of the lamp
-
Bulb (E27, 4W)
BULB AND LAMPSHADE ASSEMBLY
INSTRUCTIONS TO FOLLOW BEFORE INSTALLING OR REPLACING THE BULB:
- The cable must be disconnected from the socket.
- Place the lamp on a flat, stable and nonslippery surface.
- If the lamp was on before, allow it and the bulb to cool down for at least 10 minutes before any operation.
IMPORTANT INSTRUCTIONS FOR LAMPSHADE ASSEMBLY:
CAUTION: THE LAMPSHADE IS FRAGILE OBJECT. HANDLE WITH CARE!
To ensure that it is well fixed during assembly, tighten the small ring as
much as possible without forcing until the lampshade holds well.
To mount the lamp, place the structure on a flat surface and proceed as
below:
1| 2| 3|
4
---|---|---|---
|
|
|
- Unscrew the small ring from the lamp holder.
- Pass the lampshade gently through the lamp holder (see the illustration below).
- While holding the lampshade, screw back the ring onto the lamp holder. Tighten it as much as possible till it cannot be turned any further. Do not go beyond the resistance.
- Screw the bulb tight. After screwing, check that the lampshade and the bulb are well centered and well screwed.
USE OF THE LAMP
Connect the lamp to a power
source.
|
1
| 2| 3|
4
---|---|---|---|---
Touch the base to turn on the lamp (low intensity light).
|
Touch it a second time to get medium intensity light.
|
Touch a third time for strong brightness.
|
Touch a fourth time to turn off the lamp.
TECHNICAL SPECIFICATIONS
- Power supply: 220-240V 50Hz-60Hz 40W max
- LED bulb: 1 x E27, 4W (Only dimmable LED bulbs are compatible with this Tiffany lamp.)
COMPATIBLE BULBS
|
NON-COMPATIBLE BULBS
---|---
| | | | |
Dimmable LED bulbs| Edison dimmable LED Bulb| Edison dimmable LED Bulb|
Compact fluorescent bulbs| LED bulbs
The height of the bulb must not exceed that of the lampshade. E27 screw-type
socket. The bulb must also be compatible with a dimmer.| Not recommended due
to their incompatibility with the lamp’s touch-sensitive function.
PRECAUTIONS FOR USE
-
Use the lamp indoors only.
-
Before connecting the lamp to the mains, check that the voltage indicated on the rating plate matches that of your electrical installation.
-
Never exceed the maximum wattage for the bulbs and use the correct bulb base (refer to Part:
Technical specifications). -
Do not pull on the cord, but on the plug to disconnect the lamp.
-
Do not touch the lamp and its base with wet hands.
-
Do not touch the bulb and shade when it is lit.
-
Install the lamp away from moisture and away from flammable materials and heat sources.
-
The lamp should be placed in a dry place, on a clean and stable surface.
-
Always disconnect the lamp if left unattended, as well as before assembling, dismantling or cleaning.
-
Do not attempt to open the lamp to repair it. The electrical part can only be repaired by a qualified electrician or a specialized workshop.
-
Never look directly at the light source.
-
The lamp is not a toy. Keep the lamp out of the reach of children and pets.
-
Do not cover the lamp when it is on.
-
Handle the product with care. A blow, a shock, or a fall, even from a low height, can damage it.
-
If you do not intend to use the lamp for a long time, remove the cable from the outlet.
CLEANING AND MAINTENANCE’
- Before cleaning the lamp, unplug it and let it cool for 10 minutes.
- Clean the lamp with a soft, dry, lint-free cloth.
- Avoid contact with water.
- Do not use harsh chemicals or detergents.
- Keep the lamp away from dust, humidity and extreme temperatures.
WARNING: You should not dispose of this device with your household waste. A
selective collection system for this type of product is implemented by your
local authorities. Please contact your local authorities to find out how and
where collection takes place. These restrictions apply because electrical and
electronic devices contain dangerous substances that have harmful effects on
the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected
selectively. The symbol shows a waste container crossed out with an X symbol.
If the power cable is damaged, it must be replaced by the manufacturer, its
after-sales service or a similarly qualified person in order to avoid a
hazard.
Imported by EML – trading name Prodis 1, rue de Rome 93110 Rosny-sous-
Bois-France/ Made in PRC
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>