behringer MICROHD HD400 User Manual
- June 7, 2024
- Behringer
Table of Contents
behringer MICROHD HD400 User Manual
Welcome to Behringer
Thank you for showing your confidence in us by purchasing the Behringer MicroHD HD400.
You can use this versatile, high-quality Hum Destroyer to:
- eliminate AC hum,
- break ground loops,
- convert back and forth between unbalanced and balanced signals.
To ensure excellent signal transmission at all times, the HD400 should be used in every setup.
Connectors
HD400 connectors
- Both inputs of the HD400, INPUT 1 and INPUT 2 are laid out as 1/4″ TRS connectors.
- Both outputs of the HD400, OUTPUT 1 and OUTPUT 2 are laid out as 1/4″ TRS connectors.
SERIAL NUMBER. The serial number of the HD400 is located at the bottom.
- The HD400 is a passive device. Therefore, no power supply is needed.
Applications
The following figure shows an example of how to use the MicroHD HD400.
Example: HD400 wiring
Important Safety Instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Specifications
Input
Type
|
1/4″ TRS connector, balanced
Impedance|
approx. 500 Ω
Output
Type
| 1/4″ TRS connector, balanced
Impedance|
approx. 600 Ω
Dimensions/Weight
Dimensions (H x D x W)
| approx. 32 x 57 x 104 mm (1.3 x 2.3 x 4.1″)
Weight|
approx. 0.18 kg (0.4 lbs)
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by a y
person who relies either wholly or in part upon any description, photogr ph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
CE Compliance
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark