BLAUPUNKT IRVINE-140 In Car Multi Media Player Instruction Manual

BLAUPUNKT IRVINE-140 In Car Multi Media Player Instruction Manual

REMOTE CONTROL KEY GUIDE

BATTERY REPLACEMENT
Refer 1o the back of remote handset for details on how to replace the battery. Replace only with the same or equivalent type of battery.
BATTERY DISPOSAL
Attention should be drawn 1o the environmental aspects of used battery disposal. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly placed.

REMOTE HANDSET — GENERAL OPERATION

POWER ON/ OFF
Press to tun on or off of the unit.

OPERATING MODE SELECTION
Press MODE repeatedly to select the desired mode for operation.

VOLUME CONTROL
Press VOL+ / VOL- to adjust the volume output level.

MUTE CONTROL
Press i to turn on or off of sound mute control.

AUDIO CONTROL & FUNCTION SELECTOR
Press SEL/MENU repeatedy to shift to the following audio & function control modes and when the desired mode reached, press VOL+ / VOL- to have setting or adjustment: Volume (VOL) / Bass (BAS) / Treble (TRE) / Balance (BAL) / Fader (FAD) / Loudness (LOUD ON /LOUD OFF) / Preset EQ (POP / ROCK / CLASSIC / EQ OFF) / Local & Distant (LOCAL / DX) / Stereo & Mono (STEREO / MONO) Note: Local & distance, stereo & mono available at FM radio mode only (refer to REMOTE. HANDSET — RADIO OPERATION for details)

PRESET EQUALIZATION CONTROL
Press EQ repeatedly to select the desired preset equalization mode.

LOUDNESS CONTROL
Press & hold LOUD shortly to turn on or off of loudness control.

CLOCK DISPLAY & ADJUSTMENT
Press DISP 1o recall the time display. For clock setting, press & hold shortly DISP until the digits of hour starts blinking, press VOL+ / VOL- to adjust hour and confirm the setting by pressing SEUMENU, it will then change to minute setting. Press VOL+ / VOL- to adjust minute and when setting completed, press DISP again to resume to normal time display.

BASIC FUNCTIONS

Power ON/OFF

MOD
Mode selection Press repeatedly to select the desired mode for operation. MOD Bleutooth Mode: Press to hang up an incoming call.

1. In Radio Mode Press and hold to explore stations one at the time in descending order.
   Press once to automatically surf stations in descending order.

2. IN CD/USB/ SD Mode: Press to go back the the last track. Press and hold to rewing the track that is currently playing.

3. In Radio Mode
   Press and hold to explore stations one at the time in ascending order
   Press once to automatically surf stations in ascending order.

4. IN CD/USB/ SD Mode:
   Press to skip the next track.
   Press and hold to fast- forward the track that is currently playing.

BAND
Press BAND to cycle between FM stations, as shown below: FM1—~FM2–FM3
In Bluetooth Mode:
Press BAND to answer incoming calls. PRESET MEMORY STATION NO 1-6 Press briefly to cycle through each programmed station for 5 seconds.
Press the APS buttom for 2 seconds and the unit will automatically seek and memorize
discovered stations. The stations discovered will be assigned to the M1-M6 keys. Once completed, the unit will return to its previous operation.

NOTE: While the unit is seeking stations, it will go into sleep mode. Each band can store amaximun of 6 stations for a total of 30 programmable stations. SEL(Tone Adjustment)/Volume Control Increase the volume level turn the volume knob to the right.
Press SEL repeatedly to access to setting for BASS/ TREMBLE/LEFT/CHANNEL/RIGHT CHANNEL. These audio setting can also be adjusted using the volume button.

LCD DISPLAY : It shows the status of current operation of the unit.
: Press to turn on or off of sound muting control
EQ : Press repeatedly to select the preset equalization mode.
CLK : Press to recall time display. Press hold shorty to activate clock setting mode and hour digit starts blinking. At this mode, rotate press
FUNCTION CONTROL to adjust hour and minute. After setting, press to confirm the setting.

Radio Mode -Auto Memory Store

Press hold shortly to start searching and storing the strongest signal stations into
the PRESET MEMORY STATION NO 1-6. After one cycle searched, the unit starts scanning allthe preset stations and stops few seconds for broadcasting. Radio Mode- Auto Scan
Press to start scanning all the preset stations on selected radio band and stop few seconds for broadcasting. Press again to stop this mode.
USB /SD Input Mode
Press repeatedly to activate different searching modes that may include track file & directory search. Under this mode, rotate & press FUNCTIONNTROL to select and enter track for playback (Note: Depended on the input device and media recorded, not all searching modes are available)
MIC : For voice reception under BLUETOOTH operation
AUX : Insert an external device to this jack in order to have sound output of the external device through the unit
IR : Remote control sensor for signal reception from remote handset.
LOU : Press to turn on or off of loudness control
: Insert micro SD card to this port for digital files playback.
: Press to detach the front panel from the main unit

PAUSE/PLAY/KEY NUMBER 1

CD/USB/SD Mode
Press the pause/Play bytton to pause, play, or resume audio playback. Turning the volume knob will also resume playback.
In Radio Mode: Press to select the preset stations assigned to key number1

BROWSE/KEY NUMBER 2
CD/USB/SD Mode :
Press the browser button to play 10 seconds clip of each song.
In Radio Mode: Press to selct the preset station assignet to the key number 2.

REPEAT/KEY NUMBER 3
CD/USB/SD Mode :
Press the repeat button to repeat a single song. Press repeatedly to toggle through repeat options.
In Radio Mode:
Press to select the preset station assignat to the key number 3.

RAMDOM PLAY/KEY NUMBER 4
CD/USB/SD Mode
Press the random play button to shuffle through tracks.
In Radio Mode:
Press to select the preset station assigned to Key Number 4.
D-/KEY NUMBER 5
CD/USB/SD Mode
Press the D- button to display the previous folder (if available).
In Radio Mode:
Press to select the preset station assigned to Key Number 5.
D+/KEY NUMBER 6
CD/USB/SD Mode
Press the D+ button to display the previous folder (if available).
In Radio Mode:
Press to select the preset station assigned to Key Number 5.
MODE:
Press the MODE button to cycle between RADIO/DISC/USB/SD/AUX/BT modes. In Bluetooth (BT) mode, The MODE Key is used to end a call.
USB/SD CARD PLAYBACK
Insert a USB or SD card into their respective ports. Media will aoutom: play once Ily begi Inserta USB or SD card into the appropriete port. Media will automatically begin to play once a USB or SD card is inserted. If Auto Play does not begin, press the MODE button to select the USB/SD Card Playback Mode. Support max USD/SD cards up to 16 GB.

BLUETOOTH PRING

1. Enable Bluetooth on your device. 2. Scan for available devices.
2. Select” IRVINE 140″, or a similar name, when it appears on your device.
3. Enter the code when prompted:0000

APPLICATION TO CONTROL THE UNIT VIA BLUETOOTH OF MOBILE PHONE

User can download the following application to the mobile phone in order to have control of the main unit by the mobile phone via Bluetooth. Take your phone and follow the steps:

for Android device, search “ewaylink” from Play
Store and after searched, download & install :

~ After installation, open “EwayLink” application:
for IOS device, search “ewaylink” from App
Store and after searched, download & install

“EwayLink”

~ The following menu appeared in the mobile phone and you can start control the car unit with this menu (Bluetooth must be connected):

~ The following shows the control option:

1. Shift to setting menu for Bluetooth set up.
   (Note: it is amust to select and connect to the car unit in order to have control)

2. Exit the application.

3. Selection of operation mode.

4. Shafto set for the output level on bass / treble / balance / fader.

5. Tum on off of sound mute control.

6. Siide to set for sound output level.

7. Setfor sound output level.

8. Playback & pause control.

9. Shift rack/channel up/down for playback/broadcasting.

10. Radio band selection.

11. This shows the operating mode.

12. This shows the play back i broad ca sting details.

Remarks: The operation under this application is limited to some modes & controls only.

SPECIFICATIONS

System Parameters
Working Voltage: DC
10.8V-14.8V
Working Current: MAX 10A
Memory Current: <10mA
Working Temperature:
-20°F + 20°F
Storage Temperature:
-30°F + 80°F

Frequency Range:
– FM: 87.50MHz ~ 107.9 MHz
– AM: 530KHz ~ 1710KHz
Storage Number:
– FM: 18 Radio Stations
– AM: 12 Radio Stations
Search Method: Manual/Auto

Radio Parameters
Sound Non-balance: <2dB
Channel Separation: = 56dB
Frequency Response:
20Hz-20KHz(+3dB)

Amplifier Parameters

Test Voltage: 144V
Power Ouput: 4 x 30W
Speaker Impedance: 4-8Q

WIRING DIAGRAM

v A1-3: No connection Ad4: Battery direct connection for memory, +12V(Yellow)
AS5: Remote only for motor car antenna(Blue)
AB: No connection
AT: Ignition switch,+12V(Red)
A8: Battery/Chassis GND (Black)
B1: Speaker out Right Rear+(purple)
B2 : Speaker out Right Rear-(purple black)
B3: Speaker out Right Front+(gray)
B4: Speaker out Right Front-(gray black)
B5: Speaker out Left Front+ (white)
B6: Speaker out Lert Front-(white black)
B7: Speaker out Left Rear+(green)
B8: Speaker out Left Rear-(green black)

• Left audio output (White)
• Right audio output (Red)
• Subwoofer output (Green)
• MIC: External microphone jack

Troubleshooting

Check connections for proper voltage (11-14.4VDC).
Black wire is not connected.| Check the connection to the ground.
Fuse is blown.| Replace the fuse.
Unit has Power (but no sound)| Speaker wires are not connected.| Check the connections at the speakers..
One or more speaker wires are touching each other, or they are touching the chassis ground.| Insulate all bare speaker wires from each other and the chassis ground.
Unit blows fuses| Yellow or red wire is touching the chassis ground.| Check for a pinched wire.
| Speaker wires are touching the chassis ground.| Check for a pinched wire.
| The rating of the fuse is incorrect.| Use a fuse with the correct rating.
Excessive skipping| The unit is not mounted correctly, or the backstrap is not secure| Check the mounting sleeve and the backstrap support.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

©2023 BLAUPUNKT. All Rights Reserved. MirrorLink® and the MirrorLink Logo are certification marks of the Car Connectivity Consortium LLC. SD™ and related marks and logos are trademarks of SD-3C LLC. ©2012 Google Inc. All rights reserved. Android, is a trademark of Google Inc. Apple® is a registered trademark of Apple Inc. in the United States and other countries. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SD Card not included. 1 year warranty from date of purchase, 90 days only on labor.

BP Americas Corp.
9590 NW 40 St. Road Doral FL33178
www.blaupunkt.com

References

• blaupunkt.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>