COLAMY H25 French Country Vintage Dining Chairs Set of 4 User Manual
- June 15, 2024
- COLAMY
Table of Contents
COLAMY H25 French Country Vintage Dining Chairs Set of 4
BEFORE YOU GET STARTED, A FEW POINTERS
- Having a friend to help makes assembly extra easy
- Mind the important safety information
PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED
ASSEMBLY INSTRUCTION
Unzip the covering under the seat bottom, take the hardware set out. Place the Back With Legs(1) on a clean, non-marring surface. Align the mounting positions on the Seat(2) to the mountings on the Back With Legs(1). Lock the middle mounting position first, by using Bolt(4), Spring Washer(5) and Flat Washer(6) with Allen Key(?). Then lock the corner four mounting positions and attach them using Bolt(4), Spring Washer(5) and Flat Washer(6) with Allen Key(?), as shown on the picture above.
Friendly Notice:
If the mounting positions cannot be aligned well, then sway the Seat(2)
lightly when locking the Bolts, which could help avoid the Bolts getting stuck
and ensure assemble smoothly. Do not fully tighten the Bolts, just 50% is ok.
Insert Front Left Leg(3L) into the mounting position of Seat(2) by using Bolt(4) and Spring Washer(5) and Flat Washer(6) with Allen Key(?). Do not fully tighten the Bolts, just 50% is ok. Repeat the same process to attach the Right Leg(3R). Attach each leg using 2 Bolts(4). Then adjust the balance of the whole chair and tighten all the bolts to 100%. Last, Zip the covering.
Stand the chair up. Your chair is ready for use. This chair can only be used on a flat, level surface.
ASSEMBLY INSTRUCTIONS – ATTENTION
Please read the following instructions to help you assemble the dining chair faster.
- Partly screw in bolts, but do not fully tighten.
- Place the chair on a flat surface and apply pressure on the seat. Then tighten the middle bolt on the back, then both bolts on the sides, followed by the front legs. Ensure all bolts are fully tightened before using the chair.
- If the legs are uneven, you can also adjust the foot pegs at the bottom of the legs to improve balance.
WARNING
Read the instructions carefully.
Please follow the assembly steps
Weight Capacity for Seating: 250LBS
- To ensure proper assembly, follow all steps and use all parts. do not use power tools. Failure to follow this warning can result in serious injury to yourself or others.
- Please inspect all items before assembly. If for any reason you need to return this item, please kindly return it in it’s original packaging.
- To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
- Do not tighten all bolts and screws completely until the entire unit has been assembled and set up.
- Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
- Using the wrong size of screws on a part could result in damage to the screw or the part.
- Lubricate all moving parts and tighten all bolts/screws every 6 month or whenever needed.
- Do not use if this product become damaged, and/or components are broken or missing.
SAFETY INFORMATION
- Sit in the center of the chair, with your back to the backrest
- Do not sit at the front edge of the chair
- Do not stand on the chair
- Do not use the chair with more than one person
- Do not push the chair around when a person is sitting in it
- Do not push down on the backrest when a person is reclined
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected over the course of ownership .
- Misuse, abuse or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities
Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.
RETURN POLICY
- We adopt a 30 days return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.
- Returned products must be returned in the same condition as they were sent and they must be sent in its original packaging.
- If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.
- If the product is faulty when you receive it please contact us and we will help you out.
- We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or have missing parts not due to our error.
HOW RETURNS WORK
- Contact us through the contact form on our website and attach the invoice to the message as a proof of purchase. And please also write the reason for return.
- We will then get back to you as soon as possible with information on where to send the product(s).
- As soon as we have received the product(s) and made an inspection we will inform you of our decision.
- If a refund is approved we will automatically credit the purchase to your credit card or original method of payment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>