SHANGRI-LA SLRIOCOFTOA Rio Coffee Table User Guide
- June 15, 2024
- SHANGRI-LA
Table of Contents
SHANGRI-LA SLRIOCOFTOA Rio Coffee Table
COMPONENTS
Parts list
| NO | SIZE | CTN NO. | NO | SIZE | CTN NO. |
|---|---|---|---|---|---|
| 1 | 1168x650x16 (x1) | 2-1 | 7 | 802x220x16 (x2) | 2-1 |
| 2 | 1168x650x16 (x1) | 2-1 | 8 | 300x150x12 (x4) | 2-2 |
| 3 | 220x650x16 (x2) | 2-2 | 9 | 738x150x12 (2) | 2-1 |
| 4 | 648x181x16 (2) | 2-2 | 10 | 284x60x12 (x2) | 2-2 |
| 5 | 220x197x16 (x2) | 2-2 | 11 | 748x294x5 (x2) | 2-1 |
| 6 | 220x197x16 (x2) | 2-2 | 12 | 500x30x16 (x4) | 2-1 |
Hardware
ASSEMBLY
- Step 1: Attach the two legs (1) to the centre support (2) using the four M6x30 Screws (G).
- Step 2:
- Attach two pieces of part (12) to part (1) using four M4x30 Screws (I).
- Repeat for part (2).
- Step 3:
- Insert eight Cam Bolts (A) and eight Dowels (C) into parts (3L) & (3R) in the locations shown below.
- Step 4:
- Insert eight Cam Connectors (B) into all the holes adjacent to the corresponding Cam Bolts.
- Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
- Attach parts (1), (2) & (3L & 3R) together by screwing the Cam Connectors (B) clockwise.
- Step 5:
- Separate each Drawer Slides (M) into two pieces.
- Attach the four outer pieces of the Drawer Slides (M’), to the inner surfaces of parts (4) using 12 M4x14 Screws (K).
- Step 6:
- Insert 16 Cam Bolts (A) and Eight Dowels (C) into parts (6) & (5) in the locations shown below.
- Step 7:
- Insert 16 Cam Connectors (B) into all the holes adjacent to the corresponding Cam Bolts.
- Note: Ensure the arrow on the Cam Connector (B) is facing the direction of the hole.
- Attach parts (1), (5) & (6) to the coffee table assembly by screwing the Cam Connectors (B) clockwise.
- Step 8:
- Secure the legs to the underside of the coffee table assembly using the six M6x30 Screws (G).
- Step 9:
- Secure the legs in place using two M6x25 Screws (F) from inside the coffee table.
- Step 10:
- Insert x2 part (4) into the table assembly making sure the drawer slides are facing inwards.
- Step 10:
- Secure x2 part (4) to the table assembly using the L-Brackets (N) and the 16 M4x14 Screws (H).
- Insert four M7x50 Screws (D) from underneath the table assembly.
- Step 11:
- Attach parts (8L) & (8R) to part (9) using four M4x30 Screws (L).
- Slide part (11) into the groove on the drawer assembly and place part (10) behind it.
- Repeat for the remaining drawer.
- Step 12:
- Insert five Cam Bolts (J) into part (7) in the locations shown below.
- Insert five Cam Connectors (J) into all the holes in the drawer assembly adjacent to the corresponding Cam Bolt.
- Note: Ensure the arrow on the Cam Connector (J) is facing the direction of the hole.
- Secure the drawer assembly together by screwing the Cam Connectors (J) clockwise.
- Repeat for the remaining drawer.
- Step 13:
- Attach two inner pieces of the Drawer Slides (M”) to the drawer assembly using four M4x14 Screws (K).
- Repeat for the remaining drawer.
- Step 14:
- Insert the two drawers into the coffee table.
CONTACT
- Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>