CLDBARS20HFS Street Legal Light Bar Driving + Fog + Strobe Instruction Manual

June 3, 2024
CLD

CLDBARS20HFS Street Legal Light Bar Driving + Fog + Strobe Instruction Manual
CLDBARS20HFS Street Legal Light Bar Driving + Fog +
Strobe

WHAT’S INCLUDED

  • 1 X Light Bar
  • Side and Bottom Mount Brackets &Hardware

FEATURES & SPECIFICATIONS

  • Light Output: 3,478+1,430+680 Lumens
  • Power: 144W @ 13.6V DC
  • Beam Patterns & Compliance: 
    Driving Beam (SAE J581)
    Fog Light (SAE J583)
    Strobe (3 Flash Patterns)

Dimension

Dimension

MOUNTING INSTALL INSTRUCTION

Mounting Instruction

INSTALL INSTRUCTION

Wiring harness with 1 DT 4-Pin connector (CLDWH14 sold separately)
Installation Instruction

Or Wiring harness with 2 DT 4-Pin connectors (CLDWH24 sold separately)

  1. Determine suitable mounting locations to install the LED light bars, wiring harness and switch panel. Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at connections is required.
  2. Connect positive and negative wire properly. Press the switch buttons to test if each mode is functioning properly.
  3. Adjust the light to the desired angle and then secure by tightening all mounting screws.
  4. There are 3 flash patterns available: Hyper Burst, Quick Strobe and Slow Strobe.
  5. Turn the strobe light off for at least 2 seconds, then quickly turn the strobe switch ON-OFF-ON and the strobe light will switch to next pattern.
  6. Memory function: the last running strobe mode is automatically saved as the default strobe one.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals