SHANGRI-LA SLVICVEL Series VICTORIA Double Queen Velvet Bed User Guide
- June 4, 2024
- SHANGRI-LA
Table of Contents
SLVICVEL Series VICTORIA Double Queen Velvet Bed
User Guide
VICTORIA VELVET BED
DOUBLE/QUEEN
SLVICVELDGA, SLVICVELQGA, SLVICVELDEA, SLVICVELQEA, SLVICVELDNA, SLVICVELQNA,
SLVICVELDBA
COMPONENTS
ASSEMBLY
Step 1: Align the two holes of the bracket on the side rail (C) with the end
of the headboard (A). Insert and tighten a 30mm M8 screw (1) through each hole
of the bracket using the Allen key (6).
Once secured, attach the bracket on the other end of the side rail (C) to the
footboard (B) the same way. Repeat this process with the other side rail (C)
on the other side of the bed.
Step 2: Attach the legs (F) to the corners of the bed, securing them onto the headboard (A), footboard (B), and side rails (C) using the 20mm M8 screws (2) and Allen key (6).
Step 3: Insert the long slat (D) into the headboard (A) and footboard (B). Secure by inserting and tightening 25mm M8 screws (3) using the Allen key (6).
Step 4: Align the holes on the bottom supports (E) under the holes marked on the vertical slat (D). Insert and tighten 35mm M6 screws (4) through the holes using the Allen key (6). Insert and tighten an M6 nut (5) on the underside of the bottom supports (E) using the wrench (7).
Step 5: Connect three short slats (G) using the single and double-sided
caps (I, H) as shown below. This will create a slat assembly. Repeat this
process until you have 13 slat assemblies.
Place and align one slat assembly’s single and double-sided caps (I, H) onto
the bed with the marked dots on the side rail (C) and long slat (D).
Repeat with the remaining slat assemblies.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>