SHANGRI-LA SLSERENBSWA Serengeti Bedside Table User Guide
- June 4, 2024
- SHANGRI-LA
Table of Contents
SHANGRI-LA SLSERENBSWA Serengeti Bedside Table
SAFETY & WARNINGS
Failure to follow these basic steps can lead to damage that is not covered by your warranty.
- Read instructions carefully. Ensure no parts are missing.
- Lay out all the components on a soft surface.
- Carefully identify each component, especially those that are similar. The most common mistake is getting things back to the front.
- Do not fully tighten screws (leave slightly loose). When the item is fully assembled, tighten the screws but do not over-tighten.
- Separate and identify each component from the hardware pack and rest each one in its proper location before fastening.
- Do not, for any reason, use a power tool to assemble this product. Use of power tools may apply greater than the excess force on the fixtures, causing damage. Warranty is void if power tools have been used.
- A Phillips head screwdriver (not supplied) is required for assembly.
The user guide enclosed refers to multiple sets of metal slide runners and slide tracks (pictured above separately). To avoid any damage to these items during transportation, the slide runners and slide tracks have been pre- assembled together in pairs. Each pair includes a slide runner and slide track. Before assembling your new Shangri-La unit, please separate the slide runners from the slide tracks according to the below instructions.
- Step 1: Extend the slide runners apart from the slide track:
- Step 2: Gently press the plastic release lever on the slide runner while pulling the slide runner and slide track apart from each other:
- Step 3: The slide runner and slide track should now be separated. repeat these steps for all remaining pairs of slide runners and slide tracks:
COMPONENTS
ASSEMBLY
- Step 1: Repeat this process twice for pieces labeled 10 and 13.
- Step 2: Repeat this process twice for pieces 11 and 12.
- Step 3: Use D screws to secure parts as shown. Use a Phillips head screwdriver to secure A to B for part 10. Repeat this step twice to complete both drawers.
- Step 4: Repeat this process twice for both drawers.
- Step 5:
- Step 6:
- Step 7:
- Step 8:
- Step 9:
- Step 10: Repeat this process twice for the pieces labelled 8.
- Step 11:
- Step 12:
- Step 13:
- Step 14:
- Step 15:
- Step 16:
- Step 17:
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com