ONKRON G160 Dual Monitor Mount User Guide

ONKRON G160 Dual Monitor Mount

Features

Dual monitor desk mount with gas spring

Dimension

• Thank you for choosing ONKRON!
• We want you to be completely satisfied with your new unit. Please, if you have any questions, issues, or safety concerns, contact our sales team. We will respond promptly.

BECAUSE WE CARE

• Please share your thoughts and feelings or ideas with us about our product. Help us to continue to deliver the best quality designs. Please take a moment and leave us an online review. Thank you! Sincerely, ON KRON.
• USA:info@onkron.us / + 13159682278
• Europe:info@onkron.de / +494029996807
• Russia:support@onkron.ru / +78007772176

IMPORTANT

• Verify from the checklist all components are included BEFORE installation. Contact our sales support team for replacements if any parts are missing or appear defective.
• Verify the screen is compatible with the unit BEFORE attaching it to the mounting bracket according to VESA patterns and support screen weight. Installation may require a professional.

CAUTION

• Please read the entire instructions and safety guidelines before assembly. Failure to do so may cause personal injury, product damage, and additional property damage.
• Always wear suitable personal protective equipment and use the correct tools to safety perform the installation.
• DO NOT exceed the maximum weight rating of the unit, make non-factory approved modifications, use the unit outside of its factory-approved purpose, or OVERTIGHTEN any assembly screws used to join components.
• Use only the factory-provided mounting screws as indicated in the instructions. Ensure the construction of attaching surfaces has the structural integrity to support the combined weight of the unit and all additional hardware and components. Also, be aware of the working environment surrounding the unit which could result in accidental damage such as (but not limited to), foot traffic, shelves containing objects that may fall, and insufficient workspace.
• The user must exercise due diligence.
• Keep children away from the assembly hardware. The small pieces may result in choking if swallowed.
• Warning: Because mounting surface materials can vary widely, you must make sure the mounting surface is strong enough to handle mounted product and equipment

WARRANTY

• Not under mandatory certification. Unlimited lifespan. 5 YEARS WARRANTY.

WHAT IS THE BOX

WARNING!

• Stored energy hazard!

WARNING!

• DO NOT remove the cable tie from around the spring arm if you are not holding the two halves of the spring arm together.

1. Firmly hold the two halves of the spring arm together and have another person remove the cable tie from around the spring arm.
2. Slowly release the pressure of the spring arm and allow it to gradually stretch to its full extension.

WARNING! Keep the front arm to its highest before taking off the monitor, otherwise, it might pop up to hurt your jaw.

INSTALLATION INSTRUCTION

1a. C-Clamp installation on the desk:

• la-1. Fix the corner (8l to the bottom of the mount (Al with three screws (Dl using the key (I). 1a-2.
• Fix the clamp (Cl with two screws (Dl in the upper and the middle holes of the corner (8l, or use the middle and the lower holes, depending on the thickness of the desk. Use key (ll. la-3.
• Install the whole construction onto the desk and tighten the clamp, by spinning the knob.

1b. Gromm et hole ins tallation:

• 1b-1. Put grommet bolt (G) through the triangular plate (E). Fix the plate (E) to the bottom of the mount (A), using three screws (D) and the key (I).
• 1b-2. You can use an existing grommet hole, or drill a new 010 mm (0.39″) hole.
• 1b-3. Install the mount through the grommet hole and fix it tightly under the desk, using the washer (H) and the wing nut (F).
• Protective pads have been added to the hardware kit. WE RECOMMEND protective pad installation in the designated holes of the VESA panel.

PURPOSE:

1. The pads are designed to improve scratch resistance and also help reduce small amounts of vibration.
2. Install the protective pads (K) on each VESA panel of the mount (A).

• Install two top screws (M-A) or (M-C) and washers (M-E) to a depth of 3 mm (0.11″) into the monitor or you can use screws (M-B), (M-D) with washers (M-E) and spacers (M-F). Use key (J).

• Hang the monitor onto the arm, using these two screws.

• Tighten all four screws of the panel using the key (J). Make sure the screen is securely fixed.

• Install two remaining screws (M-A) or (M-C) and washers (M-E) to the lower holes of the VESA panel or you can use screws (M-B). (M-D) with washers (M-E) and spacers (M-F). Use the key (J).

• Adjust the tension of the gas-lift system to the weight of your screen. Turn the key to (+) for a heaver screen, or to(-) for a lighter one. Move the screen up and down, until it is
  stable in any position you choose. The arm must be adjusted for each screen individually.

• If the arm is falling – turn to (+), if the arm is moving up-turn to(-).

• Adjust the tilt angle if necessary. You may use key(J).

• ATTENTION: Repeat steps 3.1. to 5.2. for the second screen.

• Slide the lower cable management panel upwards. Remove it carefully.

• Press lightly on the plugs of the upper cable management panel and remove it.

• Lay cables through cable management grooves.

• Install the lower cable management panel to its place, and fix it by sliding it downwards.

• Install the upper cable management panel using the latches.

• Set the desirable position of the screen.

• Portrait mode.

• Landscape mode.

• Learn more www.onkron.us

• Mehr lnformationen www.onkron.de

• Learn more www.onkron-uk.co.uk

Documents / Resources

| ONKRON G160 Dual Monitor Mount [pdf] User Guide
G160, G160 Dual Monitor Mount, Dual Monitor Mount, Monitor Mount, Mount
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>