kogan KAWLPB10MSA 10000mAh MagSafe Compatible Power Bank User Guide
- June 15, 2024
- Kogan
Table of Contents
10,000MAH MAGSAFE
COMPATIBLE POWER BANK
KAWLPBIOMSA
SAFETY & WARNINGS
- The battery of this power bank will need to be fully charged before first use.
- Toensure the power bank meets its life expectancy, do not fully discharge the battery.
- Fully charge the power bank battery at least once a month, even when not in use.
- Toavoid damaging this power bank, use only approved accessories.
- Do not dismantle the power bank.
- Do not hit, throw or otherwise use excessive force against this power bank.
- Do notimmerse this power bank in water or fre.
- Do not store this power bank in a place that is exposed to:
- Dust.
- Extreme temperatures (lower than -10°C or higher than 40°C).
- Humidity and moisture.
- Toclean the power bank, use a soft cloth to wipe it.
- Keep this power bank and related accessories away from children.
OVERVIEW
COMPONENTS
OPERATION
Charging The Power Bank
-
The battery of this power bank will need to be fully charged before first use.
-
Connect one end of the provided USB-C cable to the USB-C port on the power bank and the other to a USB power adapter (not provided). Then, plug the adapter in to an electrical outlet.
Note : USB power adapter must support Quick Charge (QC), Power Delivery (PD) and/ or Samsung Adaptive Fast Charging AFC. -
The power banks battery level will be shown on the digital display. If the battery level s less than 5%, the digital display will begin flashing.
-
The digital display will continue to flash while charging the power bank until it reaches 100% and is fully charged.
Magnetic Wireless Charging
- Press the power button to activate the power bank.
- Place the device on the magnetic wireless charger.
Notes:
- Keep this power bank away from metal objects that might interfere with charging.
- Wireless magnetic charging is only compatible with magnetic phone series.
- It is recommended to remove your phone case or use a magnetic phone case when using the magnetic wireless charger.
- If the device is removed from the wireless charger for more than 30 seconds, the power bank will switch off.
Wired Charging
- Wired charging is suitable for tablets, computers, mobile phones, gaming consoles, e-books, digital cameras, etc. Both the USB-C and USB-A ports can be used for wired charging.
- Connect your device to either the USB-C or USB-A ports on the power bank using the relevant USB caole.
Note : If the device does not charge, check the USE-C cable is intact and properly connected.![kogan KAWLPB10MSA 10000mAh MagSafe Compatible Power Bank
- Wired Charging](https://manuals.plus/wp-content/uploads/2023/12/kogan- KAWLPB10MSA-10000mAh-MagSafe-Compatible-Power-Bank-Wired-Charging.png)
Simultaneous Wireless and Wired Charging
- This power bank can charge two devices at the same time by placing one device on the magnetic wireless charger and connecting the other device using a USB cable.
- If one device is currently fast charging, the other will automatically revert to 5V charging mode.
SPECIFICATIONS
Capacity | 10000mMAh/38.5Wh |
---|---|
Rated capacity | 5500mAh(5V-3A) |
Input | 5.0V=2.0A9.0V=2.0A |
Outputl/output2 | 5.0V=2.0A9.0V=2.0A |
Wireless output | 1BW/10W/7.5W/5W |
Efficiency | 275% |
Product size | 98.5mm x 69.5mm x 17.1mm |
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online tohelp.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>