ARDESTO LSH-Y1 Lint Shaver Instruction Manual

ARDESTO LSH-Y1 Lint Shaver

Product Information

Specifications:

• Model: LSH-Y1
• Power Source: USB
• Charging Time: 180 minutes
• Usage Time: 90 minutes

Product Usage Instructions

Preparation for Use:

1. Connect the device to an electrical outlet using the USB connector to start charging.
2. Make sure to use a compatible USB adapter and avoid leaving the device plugged in for a long time to prevent overheating.

Appliance Use:

1. Press the ON/OFF switch button to turn on the device.
2. Place the lint shaver head on the fabric surface with lint or loose threads.
3. Move the lint shaver head gently over the fabric in a circular motion to remove lint and thread.
4. You can use the device while it is charging. The charge/discharge indicator will light up when connected to a power source.
5. The device has a duration of work of 90 minutes when fully charged.

Troubleshooting Guide:

Problem: The device does not remove the lint.

• Possible cause: Too many clients have accumulated inside the device or the device is not turned on.
• Solution: Clean the appliance and make sure the battery is charged. Then, ensure that the device is turned on. If the problem persists, contact an authorized service center for assistance. Do not attempt to repair the device yourself.

Frequently Asked Questions:

• Q: Can I use the device while it is charging?
  A: Yes, you can use the device while it is charging. The charge/discharge indicator will light up when connected to a power source.

• Q: How long does it take to fully charge the device?
  A: It takes approximately 180 minutes to fully charge the device with a 5V, 1A adapter.

• Q: How long can I use the device after it is fully charged?
  A: The device has a usage time of 90 minutes when fully charged.

Please read this manual carefully before using the appliance and keep it for future reference. This instruction manual is part of this product. It contains important information on safety, use and disposal. Read all operating and safety instructions before using the product.

SAFETY MEASURES

• Use the product only as described in this manual and only for the specified areas of application. Usage other than as described here is not permitted and may cause damage or injury. The manufacturer is not responsible for damage caused by improper handling or modification.
• The lint shaver is designed for domestic use only. This appliance is not intended for use in commercial/industrial applications.
• Do not immerse this product in water or other liquids. Keep away from water.
• After removing the packaging materials, check the integrity of the device; if you notice a malfunction or signs of damage, do not use it and seek qualified professional assistance.
• The packing materials must be kept out of the reach of children because they are potential sources of danger.
• This appliance can be used by children over the age of 8 and people with disabilities or lack of experience or knowledge, if they are under constant supervision or have been instructed in the safe use of the appliance and they understand the possible dangers. Cleaning and customer service should not be performed by children without supervision.
• Children shall not play with the appliance.
• Keep the product and its power cord out of reach of children under 8 years of age.
• Use only accessories recommended by the manufacturer.
• Never use the device if it is not working properly, if it has been dropped, if it is damaged, or if it has fallen into the water. Return the appliance to an authorized service center for inspection and repair.
• Keep the appliance dry. Store in a cool, dry place away from direct sunlight.
• Do not expose the appliance to the weather (sun, rain, etc.).
• Do not use the device or store it near heat sources.
• Do not open and remove the blade guard during use.
• Do not use the appliance if it shows visible damage or if the blade unit or blade guard is broken.
• Do not let pointed objects come into contact with the blades during use.
• Do not switch on the appliance when performing cleaning and maintenance.
• Keep your fingers and hands away from the blades during cleaning and maintenance.
• Caution! The appliance is intended for garments only.
• Do not use the device on clothing worn by the person.
• Do not use it on your face or body.
• Do not use the device on terry fabrics, pile fabrics, embroideries, etc.
• Do not leave the device switched on unattended.
• Do not oil, to avoid marks on fabrics.
• This device contains a non-replaceable battery.
• Do not disconnect the battery for any other use than intended.
• The battery built into this device must not be disposed of with household waste. If the battery can no longer be used, it must be disposed of properly. Do not throw it into fire under any circumstances, as an explosion may occur.
• In extreme conditions, leakage may occur in the battery cells. If battery fluid gets on the skin or eyes, the affected area should be washed immediately with water. Seek medical attention.

EQUIPMENT

• Lint shaver – 1 pc
• USB type C cable (compatible with any 100~240 V, 50/60 Hz / 5 V 1 A) – 1 pc
• Cleaning brush – 1 pc
• Instruction manual (contains warranty card) – 1 pc

APPLIANCE DESCRIPTION

1. Detachable lint shaver head
2. Lint container
3. Switch button
4. LED indication
5. Body
6. USB connector

PRODUCT FEATURE

1. Removable lint shaver head for easy cleaning.
2. ON/OFF switch button. Press the ON/OFF switch button, and turn on the unit. Press the ON/OFF switch button again, and turn off the unit.
3. LED indication
   • Charge/discharge indicator
   • Low battery: when the battery is low, the indicator flashes white and goes into standby mode. Charge the device.
   • Charging: the indicator flashes white during charging. When the battery is fully charged, the indicator will be solid white.
   • Lock indicator
   • Power-on lock: when the device is off, press and hold the power on/off button for 3 seconds. The white lock indicator will flash three times. The next short press of the power on/off button will flash three times to indicate that the device is locked.
   • Unlock: In the locked state, press and hold the power on/off button for 3 seconds; after the white indicator flashes three times, you can turn on the device.
4. You can use the device while charging. The charge/discharge indicator lights up continuously.
5. Charging time (with 5 V  1 A adapter): ≤ 180 minutes.
6. Duration of work: ≥ 90 minutes.

PREPARATION FOR USE

Unit charging:
The appliance does not run from the mains when the battery is empty.

When the device is fully charged, discharge it through normal use. Then fully charge again. The battery’s maximum capacity will only be reached after several charge/discharge cycles.

• Connect the USB Type C cable to the Type C connector on the case.
• Connect the USB charging cable to the USB connector of the adapter.
• Using the adapter (not included in the set), connect the device to an electrical outlet to start charging.

Tips for optimizing battery life

• Unplug the adapter when the battery is fully charged.
• Do not leave the adapter plugged in for more than 24 hours.
• Discharge the battery completely twice a year so that the device turns itself off. Then fully charge the battery.
• The optimal ambient temperature during charging is from 15°C to 35°C.
• Please do not use the device connected to the network for a long time, as the adapter may overheat.

APPLIANCE USE

• Be sure to smooth the garment on a flat surface.
• Do not press the device too hard on the garment.
• Do not use the appliance on embroidery, zippers, buttons, or loose threads.

CLEANING AND CARE

• Before cleaning, remove the plug of the switch adaptor from the main power socket.
• Always switch off the appliance when not in use and before cleaning.
• Never submerse the appliance in water or other liquids.
• Remove the protective net cover of the device. Use a brush to clean the blades and net cover. Reinstall the upper part of the appliance.
• Remove the magnetic lid of the lint container. Use a brush to remove the lint from the container. Put the cover back on.
• Clean the container regularly.
• Use a soft cloth to clean the body.
• Do not use harsh abrasives or cleaning agents.
• Store the device in a dry place away from dust and direct sunlight.

The manufacturer reserves the right to make changes in the technical characteristics and design of the products that do not impair the operational qualities.

TROUBLESHOOTING GUIDE

sure the device is turned on.

If the above actions did not help in solving the problem, please contact an authorized service center for help. Do not attempt to repair the device yourself.

CORRECT DISPOSAL OF THIS PRODUCT

Never dispose of the device with normal household waste. Dispose of the device through an authorized disposal company or an appropriate government agency. Please follow all applicable rules. If in doubt, contact your waste disposal company. Your local community or municipal government can provide information on how to dispose of the product properly.

A recyclable lithium battery powers this device. When the device reaches the end of its useful life, remove the battery from the device before disposing of it. Dispose of the battery per local waste disposal requirements. If you have questions about disposal, please contact your local waste disposal agency. The packaging is recyclable. Dispose of the packaging environmentally.

Warranty Conditions

The plant guarantees the normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.

The service life of the product is 3 years. To avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, and the terms of warranty, and check the correctness of filling out the Warranty Card. The Warranty Card is valid only if the following information is correctly stated: model, serial number of the product, date of sale, clear seals of the company- seller, and signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased, or rewritten, the Warranty Card is considered invalid.

Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user and by specialists having the necessary qualifications set by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation and for obtaining a warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.

In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made per the law «On Protection of Consumers’ Rights». In the case of warranty repair, the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer!
Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured per the highest quality standards, and we thank you for choosing this particular instrument.

We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and filled original warranty card, which indicates: the product model, date of sale, serial number, warranty service period, and the seller’s seal.
2. The service life of household appliances is 3 years.
3. The product is intended for consumer use. When using the product in commercial activities, the seller/manufacturer does not bear warranty obligations, and after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules outlined in the instruction manual.
6. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, and insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters With state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of serial number of the device, or inability to identify it.
7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands, and other containers for storing products.
8. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.

• Customer Signature …………………………

Warranty card

• Product
• Model
• Serial number
• Seller Information
• Trade organization name
• The address
• Date of sale
• Seller stamp

Coupon No 3

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Coupon No 2

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Coupon No 1

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>