SUPERATV IN-FWS-K-TRX4-005 Scratch Resistant Flip Windshield Installation Guide
- June 15, 2024
- SUPERATV
Table of Contents
SUPERATV IN-FWS-K-TRX4-005 Scratch Resistant Flip Windshield
Features
- SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer. Remove or secure with straps.
- This item is not returnable if the protective film has been removed.
- Test fit to the cage to confirm fitment before removing film.
- Do not discard packaging until product has been successfully installed.
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV® to verify that
they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will
change the ride of machine and may increase maintenance and part wear.
Operating any off-road machine while, or after, consuming alcohol and/or drugs
increases risk of bodily harm or death. No warranty or representation is made
as to this product’s ability to protect user from severe injury or death.
SuperATV® urges operators and occupants to wear a helmet and appropriate
riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should
damages occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of seller to user for all damages, losses, and
causes of action, if any, shall not exceed the total purchase price paid for
the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation
law. The Buyer is solely and exclusively legally and personally responsible
for any violation of the law by the installation or use of the product. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV® harmless from any damage resulting
from failure to adhere to such specifications, warnings and/ or instructions.
The Buyer is also responsible to obey all applicable federal, state, and local
laws and ordinances when operating his/her vehicle while using this product,
and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
Kit Contents
-
Upper
-
Gasket
-
Seal
-
Lower
-
Lower Bracket – L
-
Lower Bracket – R
-
Support
-
Handle
-
Catch Support
-
Catch
-
Strut Assembly – L
-
Strut Assembly – R
-
Strut Bracket – R
-
Strut Bracket – L
-
remove hardware from Clamps; do not discard
Windshield Cleaning
- Do not use Rain-X®, Plexus® or any other protector, wax, or polish.
- Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
- Do not use a windshield wiper blade or install a motorized windshield wiper
- Never use razor blades, scrapers, squeegees, brushes, etc.
- Thoroughly rinse Windshield to float off dirt and mud.
- Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand washing soap can also be used.
- To prevent water spots, use a chamois to blot Windshield dry.
Installation Instruction
When assembling, do not tighten hardware completely unless noted.
-
Install provided Seal to Lower
install provided Seal along bottom of Lower To ease installation, soak Seal in hot water before cutting or installing to increase flexibility
Seal -
Install Lower Bracket – R to Lower with hardware shown.
-
Repeat for Lower Bracket – L.
-
Install Catch and Catch Support to Lower.
-
Hardware included with Catch.
-
Install Lower to Roll Cage with bolts included with Clamps.
-
Install provided Gasket to Lower.
-
Install Strut Assembly – L to Upper with hardware shown; tighten.
-
Install Strut Bracket – L to Upper with hardware shown; tighten.
-
Repeat steps for passenger side components.
-
Install Handle and Support to Upper.
-
Hardware included with Handle.
-
Tighten hardware.
Extra hands will make Upper installation easier.
-
Place Upper assembly onto machine and secure to Cage with Clamps; do not tighten
-
Engage Handle to Latch and align Windshield to machine.
-
Tighten all hardware.
-
Place Upper in open position and secure Gas Struts to Strut Brackets with hardware shown; tighten.
Customer Support
Need help with your installation?
sales@superatv.com
1-855-743-3427
www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>