brother MFC-L6915DW Multifunction Printers User Guide
- June 15, 2024
- Brother
Table of Contents
brother MFC-L6915DW Multifunction Printers
Product Information
Specifications:
- Models: DCP-L5510DN, DCP-L5510DW, DCP-L5660DN, MFC-L5710DN, MFC-L5710DW, MFC-L5715DW, MFC-L5915DW, MFC-L6710DW, MFC-L6720DW, MFC-L6910DN, MFC-L6915DW
- Version: 0
Product Usage Instructions
Unpacking and Installation:
- Remove all packing materials and discard the silica gel pack.
- Re-install the toner cartridge and drum unit assembly by removing the orange part.
- Adjust the paper guides in the paper tray and load paper. Make sure not to exceed the marked limit.
- Connect the AC power cord to the machine and turn it on.
- If required, set your country/language by following the on-screen instructions.
- Select your language by navigating to [Settings] > [All Settings] > [Initial Setup] > [Local Language] on the machine’s touchscreen.
- If you have an MFC model and plan to use the fax feature, connect the telephone line cord.
- Connect your computer or mobile device to the machine using one of the available connection types. Visit setup.brother.com to download and install Brother software.
- Follow the on-screen instructions and prompts to complete the setup.
Printing and Scanning:
You can now print and scan using your machine.
Network Security:
It is recommended to immediately change the default password located on the back of the machine marked as “Pwd” to protect your machine from unauthorized access.
FAQ:
Q: Can’t Connect?
A: If you are experiencing connection issues, please check the following:
- For wireless network connection, restart your wireless access point/router.
- For wired network or USB connection, disconnect the cable.
- Restart your machine and computer.
- If the issue persists, visit support.brother.com for FAQs and Troubleshooting.
Q: Manual Wireless Setup?
A: If the wireless setup is not successful, you can try setting up the
connection manually. Note that for certain models, the wireless network
connection requires the optional Wireless Module to be installed.
SSID (Network Name) and Network Key (Password):
Please find your SSID and Network Key on your wireless access point/router
and write them in the table provided.
Unpack the machine and check the components
NOTE:
- The components included in the box may differ depending on your country.
- The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres
long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
The screens and images in this Quick Setup Guide show the MFC-L6915DW.
INSTRUCTION
-
Remove the packing materials and re-install the toner cartridge and drum unit assembly
-
Load paper in the paper tray
-
Connect the power cord and turn the machine on
-
Select your country/language
(Initial setup only)
After turning the machine on, you may be required to set your country or language (depending on your machine).
If required, follow the on-screen instructions. -
Select your language (if needed)
If your machine displays the [All Settings] menu on the Home screen, start from [All Settings].
Connect the telephone line cord
If you do not plan to use the fax feature on this machine, go to step 7
Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types
available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen instructions and prompts.
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security: The default password to manage
this machine’s settings is located on the back of the machine and marked
“Pwd”.
We recommend immediately changing the default password to protect your machine
from unauthorized access
NOTE:
For Windows only, CD installation is also available (for some countries).
Can’t Connect? Check the following:
For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
Manual wireless setup
- If the wireless setup is not successful, try to set up the connection manually. For certain models, the wireless network connection can be used only when the optional Wireless Module is installed
- Find your SSID (Network Name) and Network Key (Password) on your wireless access point/router and write them in the table provided below
- If you cannot find this information, ask your network administrator or wireless access point/router manufacturer.
- If setup is not successful, restart your Brother machine and your wireless access point/router, and repeat . If still not successful, visit support.brother.com.
- For detailed machine information and product specifications, see the Online User’s Guide at support.brother.com/manuals.
© 2023 Brother Industries, Ltd. All rights reserved
Video setup instructions:
support.brother.com/videos
The latest manuals are available at the Brother support website:
support.brother.com/manuals
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>