SUPERATV Polaris RZR XP Turbo S Power Steering Kit Instruction Manual
- June 15, 2024
- SUPERATV
Table of Contents
SUPERATV Polaris RZR XP Turbo S Power Steering Kit
Product Information
Specifications:
- Product Name: Fender Armor
- Model Number: IN-FAP-P-RZRXP-002
- Date: 9/5/2023
Product Usage Instructions
Installation Instructions:
- Before beginning the installation, make sure to read the instructions and view the illustrations provided.
- Do not discard the packaging until the product has been successfully installed.
- Machines with SuperATV Full Skid Plates must remove Splash Guards and they will not be reinstalled.
- Remove the left Splash Guard from the front.
- Remove the hardware shown from the Master Cylinder.
- Secure the Driver Plate to the Master Cylinder and Frame using the provided hardware. Tighten the hardware.
- Drill holes into the Frame as indicated.
- Secure the Driver Plate with the provided hardware. Tighten the hardware.
- Secure the Passenger Plate to the Frame using the provided hardware. Tighten the hardware.
- Drill holes into the Frame as indicated.
- Secure the Passenger Plate with the provided hardware. Tighten the hardware.
FAQ (Frequently Asked Questions):
Q: What should I do if I need help with my installation?
A: For installation assistance, you can contact our customer support team
through one of the following methods:
- Email: sales@superatv.com
- Website: www.superatv.com
- Phone: 1-855-743-3427
Our customer support team is available during the following hours:
- Monday – Thursday: 8:00am – 8:00pm EST
- Friday: 8:00am – 7:00pm EST
- Saturday: 9:00am – 2:00pm EST
INSTALLATION INSTRUCTIONS
Do not discard packaging until product has been successfully installed.
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV® to verify that
they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will
change the ride of machine and may increase maintenance and part wear.
Operating any off-road machine while, or after, consuming alcohol and/or drugs
increases risk of bodily harm or death. No warranty or representation is made
as to this product’s ability to protect user from severe injury or death.
SuperATV® urges operators and occupants to wear a helmet and appropriate
riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should
damages occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of seller to user for all damages, losses, and
causes of action, if any, shall not exceed the total purchase price paid for
the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation
law. The Buyer is solely and exclusively legally and personally responsible
for any violation of the law by the installation or use of the product. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV® harmless from any damage resulting
from failure to adhere to such specifications, warnings and/ or instructions.
The Buyer is also responsible to obey all applicable federal, state, and local
laws and ordinances when operating his/her vehicle while using this product,
and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
ASSEMBLY
Machines with SuperATV Full Skid Plates must remove Splash Guards; will not be reinstalled .
- Secure Driver Plate to Master Cylinder and Frame with hardware shown; tighten.
- Drill holes into Frame.
- Secure Driver Plate with hardware shown; tighten.
- Secure Passenger Plate to Frame with hardware shown; tighten.
- Drill holes into Frame.
- Secure Passenger Plate with hardware shown; tighten.
Need help with your installation?
sales@superatv.com
www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Read instructions and view illustrations before beginning.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>