VIGOPKA 13.56Mhz Smart Locks Front Door User Manual
- June 15, 2024
- VIGOPKA
Table of Contents
USER MANUAL
PRODUCT DETAILS
-
Package Included
-
Product Overview
-
Specifications
**** Material| Alloy
---|---
Power Supply| 4pcs AA Batteries (Not provided)
Operating Temp Range| -13 °F~ 149 ° F
Unlock Ways| APP, Keys, Passwords, Fingerprints and IC
Password Digits| Cards 6-9 Digits
Passwords Storage| 300
Fingerprints Storage| 100
IC Cards Storage| 299
IC Cards ype| 13.56Mhz
GETTING SARTED
-
Identify Left/Right Hand Door
Stand by OUTSIDE facing the keypad.
-
Check Door Measurements
INSALL THE LOCK
- Adjust the Latch
A Measuring if the latch is long enough, pull it to ad- just from 60mm to
70mm.| B If the ‘square’ latch ho le is centered in the door
hole, no need to adjust.| C If not, adjust it until it is centered.
2. Install the Latch and Strike Plate
A Insert the latch and keep the latch square hole horizontal.| B Use related
screws to tight up.
3. Adjust the Handle Direction
A Left Hand Door: Turn the
front handle to Right and turn the back handle to Left.
Right Hand Door: Turn the front handle to Left and turn the back handle to
Right. (Follow as the Picture)
B After the adjustment, tighten the screws according to the pictures in the
corresponding direction.
-
Install the Front Panel
-
Route the IC Wire & Install the Mounting Plate
****
A Connect the IC wire of front
and back panel.| B Tighten up 3*mounting plate screws to fix the mounting plate.
Note: If the thickness of your door is greater than 48 mm, please use longer screws. -
Install the Back Panel
-
Test
A Press the handle of the back panel to see whether the latch can retract normally.
B Before the administrator password is set (in reset mode), any password /fingerprint/ IC card can unlock.
C Enter 6-9 digits end with# to unlock, it will auto-lock within 5s.
-
How to reset
A: Remove the battery cover when powered on, press and hold the reset button for about 55, and release it after hearing the voice “Initializing”.
B: When you hear “succeed”. it indicates that the reset is successful. (any 6-9 digits password /fingerprint/ IC card can be unlocked now.)
C: If you don’t have a screwdriver or tool of sufficient size to press the reset button, you can remove the back panel and hold the reset button directly (also ensure that it is powered on).
**MORE FUNCTIONS
**
-
Low Battery Alarm
When the battery is low, every time you wake up the keypad, there will be a voice reminder that the battery is low, and please replace the battery. -
Password Input Error Protection
Enter the wrong password 5 times in a row and enter the locked state for 3 minutes (the keypad cannot be woken up in the locked state, and an alarm will sound when you touch the keypad).
APP PROGRAMMING
Pairing Lock to Phone App
- Download the App “TTLock”
Android Mobile Phone-—Search “TTLock” from Google Play.
Apple Mobile Phone–please search “TTLock” from App Store.
|
---|---
https://www.pgyer.com/Ptdq|
https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=1033046018
2. Register and Login the Account
- Match the Lock to the Application
When matching, follow the prompt steps of the program, you need to touth the screen after installing the lock and installing the battery, match the blue icon lock , and set the name for the lock.
Note: If the smart lock is in a non-addable state, take off the battery cover and press the reset button and enter the neciovational password: “OOO#”, then add lock again
TTLOCK App Operating
-
Account Information Change
When logging in “TTLock” App, you need set up an account contain account password.
Each account can be added with multiple smart device locks for management.
Once the smart lock is added, it will become the admin account for the lock.
-
Lock/Unlock
Press for unlock, long press for lock. It requires your smart phone and Bluetooth lock to be within a certain range.
Note: If you want remote control,you need to connect to the Gateway. -
Send ekey
You can add another account on the app. This way your family can also control the Bluetooth lock via the app. Support authorized users to Limit time, Permanent, One-time, Recurring control smart lock.
-
Generate Passcode
Generate or customize the pass-code of the Bluetooth lock. Generate or customize permanent, one-time, time-limited, recurring passcode. Note: Generate the passcode to clear the passcode that Bluetooth lock stored by “Erase”. Once used, in addition to the admin passcode, other passcode will be cleared.
-
ekeys
Manage the authorized accounts in Send eKeys. Admin can clear eKey, reset eKey, send eKey etc.
-
Passcodes
It records all passwords stored by the Bluetooth lock you had set. In addition, it can also reset, generate, upload passwords.
-
IC Cards
You can match two types of IC card: Permanent or Timed. Place the card against the card reader sensor on the smart Lock(keypad panel).
-
Fingerprints
You will be required to Place and Remove your finger to the sensor several times please follow the prompts.
-
Records
It records the time and manner of the smart lock when someone opening or closing. Manage your Bluetooth lock safely and efficiently.
-
Settings
It have the function about the Bluetooth lock function setting, lock information setting, remote unlocking, auto-off time, lock sound, time proofread, record reading, etc.
You can find the information about the lock such as battery
power, admin passcode.
Note:The admin passcode will not be cleared when erase passcode.
If you forget to lock your door often, you could to set“ Auto Lock”.
Set the time for automatic locking in your needs, so you don’t have to worry about security accidents due to being unlock.
-
Remote Control
Remote control support needs an extra additional Wi-Fi Gateway. Match the gate- way, smart phone, app then the smart lock can support remote control lock.
MATCH the Wi-Fi GATEWAY to the APPLICATION
Remote Control and Alexa would support after matching the Wi-Fi Gateway.
Click the button in the upper left corner of the page and enter relevant
information as prompted to add a gateway to your account.
Note: When the smart phone app matches the smart lock or the gateway, it
is necessary to enable Bluetooth and Wi-Fi. It can be successfully matched
when your smart phone is close to the lock and the Gateway.
MATCH the TTLOCK APP to the ALEXA APP
After setting up to the gateway, authorize the TTLock app in the Alexa app
and log in to the TTLock account to enable remote unlock and voice remote
unlock. Select “Skill & Games, input “TTLock” in the search bar, click “ENABLE
TO USE”. And input TTLock account and password to finish the authorization.
Note: If shows “Invalid Account and Password”, please add “+1” at front
of the account.
Press locks option,choose the lock you paired. Click the icon in the upper right corner and slide the icon button of “unlock by app” and “unlock by vocie”
MATCH the SMART WATCH to the SMART LOCK
Apple watch
Android watch
Support Smart Watch (Apple watch or Android watch) lock/unlock.
It is supported that smart watch match to smart phone.
If the watch is connected to the phone, but it cannot search the “TTLock” App.
Try to log in to the home page at your phone app, to refresh, and then check
in the watch.
If all settings are normal but can’t lock/unlock.
Opening the “TTLock” App in your phone to check if the key is in a normal
state.
Note: All the operations, your watch and mobile phone require a certain
range, the mobile phone network and Bluetooth need to remain in a normal
state.
Warranty
You will be 100% satisfied. We provide a refund 60 days after purchase and 90
days to replace the product regardless of the issue. E-mail us with your order
information to leam more.
How Can i Get Tech Support?
E-mail: KPPSmartLock@outlook.com
Powered by KPP Smart Home
Installation video
https://www.youtube.com/@LOCKISSAUG/featured
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>