SUPERATV M10 Brace Polaris RZR XP 1000 High Clearance Billet Aluminum Radius Arms Instruction Manual
- June 15, 2024
- SUPERATV
Table of Contents
SUPERATV M10 Brace Polaris RZR XP 1000 High Clearance Billet Aluminum
Radius Arms
Product Information
This product is the IN-RA-P-RZRXP-B-HC ~ IN-RA-P-RZRT-B-HC. It is a rear brace kit designed for installation on certain models of off-road vehicles. The kit includes upper and lower braces, as well as M10 and M12 hardware kits. The purpose of this product is to provide additional support and stability to the vehicle’s rear suspension system.
Specifications
- Model: IN-RA-P-RZRXP-B-HC ~ IN-RA-P-RZRT-B-HC
- Compatibility: Compatible with specific models of off-road vehicles
Product Usage Instructions
Installation Instructions
- Before beginning the installation, make sure not to discard the packaging until the product has been successfully installed.
- Read the instructions and view the illustrations provided in the user manual before starting the installation process.
- Remove the RSLs (Rear Suspension Links) from the Knuckle and Frame, but keep the hardware.
- Measure the eye-to-eye distances on the stock RSLs and transfer those dimensions to the new RSLs.
- If there is a SuperATV Rear Brush Guard present, do not install the Brace.
- Secure the Upper and Brace to the Frame using the hardware shown in the illustrations.
- Secure the Upper to the Knuckle using the stock hardware.
- Repeat the previous steps for the opposite side.
- Secure the Lower to the Brace and Frame using the provided hardware.
- Secure the Lower to the Knuckle using the stock hardware.
- Repeat the previous steps for the opposite side.
- Slightly trim the corner on the Rear Trailing Arms as indicated in the illustrations.
- In some cases, there may be slight interference between the Uppers and stock Guides. If this occurs, follow the steps provided in the user manual to trim away the plastic and reinstall the Guide.
FAQ
Q: How do I determine if my vehicle is compatible with this rear brace kit?
A : This rear brace kit is compatible with specific models of off-road vehicles. Please refer to the product specifications or contact SuperATV customer support for assistance in determining compatibility.
Q: What should I do if I encounter any issues during the installation process?
A: If you need help with your installation, you can contact SuperATV
customer support via email at
sales@superatv.com, visit their website at
www.superatv.com, or call their customer
support hotline at 1-855-743-3427.
They are available to assist you during the following hours: 8:00 am – 8:00 pm
EST from Monday to Thursday, 8:00 am – to 7:00 pm EST on Fridays, and 9:00 am
– 2:00 pm EST on Saturdays.
MODELS
- Do not discard packaging until the product has been successfully installed.
- M10 and M12 hardware kits included
- Use stock RSL bolt to determine M10 or M12 installation
- M12 installation shown in instructions
if the SuperATV Rear Brush Guard is present, do not install the Brace
Liability Statement
- SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.
- Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
- By purchasing and installing SuperATV® products, the user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
- SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warranted if the item was not installed properly, misused, or modified.
- Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may violate the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
- The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings, and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
INSTALLATION INSTRUCTIONS
- Secure the Upper and Brace to the Frame with the hardware shown.
- Secure Upper to Knuckle with stock hardware.
- Repeat the steps for the opposite side.
- Secure Lower to Brace and Frame with hardware shown.
- Secure Lower to Knuckle with stock hardware.
- Repeat the steps for the opposite side.
- Slight interference between Upper’s and stock Guides may occur.
- Mark the area to be trimmed onto the Guide.
- Remove the Guide and trim away the plastic; reinstall.
- Repeat the steps for the opposite side.
- IN-RA-P-RZRXP-B-HC ~ IN-RA-P-RZRT-B-HC
- Need help with your installation?
- www.superatv.com
- 8:00am – 8:00pm EST M-Th
- 8:00am – 7:00pm EST Friday
- 9:00am – 2:00pm EST Saturday
- sales@superatv.com
- 1-855-743-3427
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>