TRIPP-LITE B127A-1P0-PH 1-Port HDMI Over Cat6 Receiver User Manual

: June 4, 2024
: Tripp Lite

Table of Contents

TRIPP-LITE B127A-1P0-PH 1-Port HDMI Over Cat6 Receiver
MODELS
Features
Highlights
Applications
System Requirements
Package Includes
Specifications
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRIPP-LITE B127A-1P0-PH 1-Port HDMI Over Cat6 Receiver

MODELS

MODEL NUMBER: B127A-1P0-PH

Works with a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K video 230 ft. to an HDMI display via Cat6 cable.

Features

HDMI Pigtail Receiver Ideal for Digital Signage in Schools and Workplaces
This 4K receiver is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft….or Even Farther
The B127A-1P0-PH connects to a Tripp Lite B127A-Series transmitter, switch or splitter to extend 4K signals from an HDMI source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H signal repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

Supports Crystal-Clear 4K Video with Multi-Channel Audio, HDR, and 4:4:4 Color
The B127A-1P0-PH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites, and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. Advanced 4:4:4 chroma subsampling is ideal for top-level PC gaming or using your HDTV as a PC monitor. This receiver also features built-in equalization control and auto EDID image adjustment.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the B127A-1P0-PH over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The receiver works right out of the package with no software required. Connect the receiver to a transmitter, switch, or splitter with a user-supplied Cat6 cable (such as Tripp Lite’s N202-Series). The pigtail HDMI connector plugs directly into a 4K display.

Highlights

Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0.
Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy.
Combines with optional B127A-010-H repeater to extend the signal to 400 ft.
Power over Cable (PoC) technology provides power to the receiver via a Cat6 cable.
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Applications

Extend video signals from one room to another using a Cat6 cable, which can pass through the conduit to meet building codes.
Gain flexibility in where the display is placed, with the freedom to move and relocate it up to 230 ft. from the transmitter.
Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show, or other location.

System Requirements

Source devise with HDMI output (Blu-ray player, cable box, laptop).
Display devise with HDMI input (HDTV, projector, monitor).
Tripp Lite B127A-Series transmitter, switch, or splitter.

Package Includes

B127A-1P0-PH 1-Port HDMI over Cat6 Receiver.
Owner’s manual.

TAA-Compliant for GSA Schedule Purchases
The B127A-1P0-PH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Specifications

OVERVIEW

Range (ft)

| ****

230

Max 3840 x 2160 (4K@60Hz)

Range (ft)

| ****

230

Receiver/Transceiver Video Output| HDMI
Receiver – Number of Video Outputs| 1
Signal Range (ft)| 230
Signal Range (m)| 70
Range Extension using other Tripp Lite product| ** 400 ft.
Recommended Cabling| Solid Wire 24AWG Cat6 Cabling (Tripp Lite N202-Series)
Extended Mode| Yes
Extended Mode Details| x1 HDMI Output (4K/60 Hz)
Mirror Mode| Yes
Mirror Mode Details| x1 HDMI Output (4K/60 Hz).
Other Tripp Lite product used to extend range| B127A-010-H Signal Booster
---|---
Max Supported Color Depth| 36-bit Deep Color
HDR Support| Yes
3D Video Supported| Yes
Chroma Sub Sampling| 4:4:4
Maximum Signal Range (ft)| 230
Maximum Signal Range (m)| 70
AUDIO
Audio Ports| HDMI (FEMALE)
Audio Ports Details| x1 HDMI Output supports pass-through audio formats including LPCM 2.0/5.1/7.1
Audio Input| HDMI
Audio Output| HDMI
Audio Specification| Supports pass-through of Audio format including LPCM2.0/5.1/7.1
INPUT
Built-In Cable Length (ft.)| 1
Built-In Cable Length (in.)| 12
Built-In Cable Length (cm)| 30.5
Bus Powered| No
POWER
Power Source Type| AC Adapter
AC Plug Type| AS/NZS 3112; BS1363; CEE 7/16 Schuko; NEMA 1-15P
Power Source| The transmitter end only (Optional)
Power Over Cable (PoC) Support| Yes
Receiver Power Source| Power Over Cable
USER INTERFACE, ALERTS & CONTROLS
LED Indicators| RJ45: Green (1) = Power, Orange (1) = Data transferring
PHYSICAL
Color| Black; Gray
Included Mounting Accessories| No
Material of Construction| Plastic
Number of Displays| 1
Form Factor/Mounting Options| Pigtail
Rackmountable| No
---|---
Shipping Dimensions (hwd / cm)| 4.39 x 19.99 x 14.20
Shipping Dimensions (hwd / in.)| 1.73 x 7.87 x 5.59
Shipping Weight (kg)| 0.16
Shipping Weight (lbs.)| 0.35
Unit Dimensions (hwd / cm)| 18.6 / 47 / 75
Unit Dimensions (hwd / in.)| 0.732 / 1.850 / 2.95
Unit Packaging Type| Box
Unit Weight (kg)| 0.45
Unit Weight (lbs.)| 1
ENVIRONMENTAL
Operating Temperature Range| 32 to 104F (0 to 40C)
Storage Temperature Range| 5 to 122F (-15 to 50C)
Relative Humidity| 0 to 85% RH, Non-Condensing
COMMUNICATIONS
Signal Range (ft.)| 230
Signal Range (m)| 70
Transmission Distance| 230 ft (Standard); 400 ft. (with B127A-010-H booster)
EDID Compatible| Yes
IR Remote Extension Support| No
RS-232 Serial Extension Support| No
Consumer Electronics Control (CEC) Supported| **

No

Latency| Zero Latency
USB Extension Support| No
CONNECTIONS
Side A – Connector 1| RJ45 (FEMALE)
Side B – Connector 1| HDMI (MALE)
FEATURES & SPECIFICATIONS
HDCP Specification| 1.4; 2.2
Driver Required| No
Recommended Category Cable| 24AWG Cat6
All-in-One Kit| No
DIN Mountable| No
---|---
Integrated/Removable Cable| No
MST Support| No
Included Mounting Accessory| No
Multi-Resolution Support| Yes
Built-In Equalizer| Yes
STANDARDS & COMPLIANCE
Certifications| CE, FCC, RoHS, REACH

WARRANTY

Product Warranty Period (Worldwide)| 1-year limited warranty

© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite’s testing agencies:
https://www.tripplite.com/products/product-certification-agencies.