SecuFirst REP240 3 In 1 Wireless WiFi Repeater User Guide

: June 4, 2024
: SecuFIRST

Table of Contents

SecuFirst REP240 3 In 1 Wireless WiFi Repeater
ABOUT COMPANY
INSTALLATION INSTRUCTION
Additional information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SecuFirst REP240 3 In 1 Wireless WiFi Repeater

ABOUT COMPANY

ALC Electronics B.V. Ericssonstraat 2
5121 ML Rijen
The Netherlands
sales@secuﬁrst.eu
www.secuﬁrst.e

INSTALLATION INSTRUCTION

Box content
Plug in the Wi-Fi repeater in a 230V socket nearby your router. (After installation you can change the location of the Wi-Fi repeater were the signal is still enough).
If the blue LED is not flasing, hold the reset button for 10 seconds.
Go to the Wi-Fi settings of your smartphone or PC and connect with a Wi-Fi signal “Wireless-N”. There is no password requiered to make the connection. Your smartphone or PC will can give a message, no internet.
This is correct.
Open the internet browser on your smartphone or PC. Type “192.168.10.1” in the address box and enter / go.
A login page will display. Fill in the default password “admin” in the row behind the lock (see picture 5). Choose your prefered language and click on the login button.
Click on the “wizard” button, below in the screen.
The Wi-Fi repeater has 3 functions:
Repeater mode.
The Wi-Fi repeater wirelessly receives your own Wi-Fi signal which is then amplified.
AP (Access point).
Create a new Wi-Fi network by connecting a LAN-cable from the router to the Wi-Fi repeater.
Client mode.

  * Make a device which is only suitable for wired internet, wireless.
  * In this Quick Start Guide we will proceed with the installation of option 1, repeater mode.
  * Check our big manual for more information about the other options. This can be found on [www.secufirst.eu](http://www.secufirst.eu). To continue the installation, press “Repeater”.

Choose your own Wi-Fi network by clicking on the circle behind the correct network in the bottom window. Note, if your network will not appear, click on the renew logo.
If your network will still not appear, then place the Wi-Fi repeater closer to your router.
After selecting the correct network, your Wi-Fi network is automatically filled in by “Connect to:”.
You must fill in your own Wi-Fi password yourself at “Wi-Fi Password:”.
The “Repeater SSID:” field will be filled in automatically. This is the name of your new Wi-Fi network.
Then click on the “Connect” button.
Your Wi-Fi repeater is configuring now.
Wait until the indication bar is at 100% and then close the browser.
Go to the Wi-Fi settings of your smartphone or PC.
You will see that the new Wi-Fi network will appear. Connect to this new Wi-Fi network.
Note, the password is the same password as your own Wi-Fi network.
Downloads available on our website: www.secufirst.eu
- Big manual.
- How to install movies.

Additional information

Use other mode
To use the Wi-Fi repeater for another mode (repeater mode, AP mode or client mode) after installation, you must log in to your Wi-Fi repeater again.
Thereare2possibilities:
1. After installing the Wi-Fi repeater, the IP address 192.168.10.1 will no longer be available. This is because your own router gives a different IP address to the Wi-Fi repeater.
  Check in your router the new IP address of the Wi-Fi repeater. With this new IP address you can return to the login screen of the Wi-Fi repeater via the internet browser. The password is still the same: admin.
2. Reset the product by pressing the reset button on the side of the Wi-Fi repeater for 10 seconds.
  Then follow the steps of this Quick Start Guide again.