Premier LV221407 LED Lit Inflatable User Manual

LED Lit Inflatable
Indoor or Outdoor Use
Catalogue No: LV221407

LV221407 LED Lit Inflatable

Thank you for purchasing this product. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. This product can be used in complete safety both indoors and outdoors, but please ensure that the  transformer is plugged into the mains supply indoors and not outdoors, or in damp conditions.

INSTRUCTIONS FOR USE:

• This product is fitted with Light Emitting Diodes (LEDs).
• Carefully remove from packaging taking care not to damage or twist the wires.
• Place item on a flat stable surface free from obstruction or other debris. If used outdoors, ensure item is secured to the ground.
• Make sure the air intake located on the bottom of unit is clear of fabric and free of obstruction.
• Make sure that the cable is completely unravelled and that there are no snags in the cable.
• To operate, plug the transformer into mains supply, indoors.
• Caution: Do not attempt to inflate during strong winds.
• To deflate, simply unplug and open the zipper on back of inflatable.

TROUBLE SHOOTING:

If the motor is not working, ensure:

• The plug is plugged in and switched on.
• Debris may be lodged in the fan. Turn the unit off before clearing the obstruction.
• If fitted ensure zipper is securely closed so air stays inside the figure.

CLEANING AND STORAGE:

• Only use mild detergent with cold water to wipe clean the figure.
• Leave inflated until completely dry before packaging the unit away.

LEDs:

• Non-replaceable Light Emitting Diode (LED): Rating –12V 0.6W

TRANSFORMER:

• This item is supplied with a DC 12V 8.4VA transformer and should only be used with this transformer.

FOR SAFETY’S SAKE:

• It is very important that the product is NEVER DIRECTLY connected to the mains supply without the transformer.
• Do not completely cover the LED with decorations and other flammable materials. Ensure adequate airflow around each LED.
• Do not damage the insulation of cable or LED holder.
• Do not secure the wiring of the product with staples or nails.
• Do not close doors or windows on the wiring as this may damage the wiring insulation.
• Do not lay the cable under carpet or where it can be damaged.
• Ensure that cables are fully unwound and sited where they will not become damaged or present a tripping hazard.
• Do not connect this product electrically to any other product.
• Do not connect the product to the mains supply while it is in the packaging.
• Do not allow any plastic part to come into contact with heat or flame.
• Do not unscrew or twist the LED.
• Do not submerge the product in the water (e.g. puddles, guttering and ponds)
• Transformers will become warm during use so should be positioned on flat, stable and heat resistant surfaces.
• Unplug the product when leaving the house, when retiring for the night or if left unattended.
• Do not overload wall sockets. Use different sockets around the house to plug in multiple lights to balance the load.
• For decorative purposes only. Not suitable for use in play by children
• Please retain this information for future reference.

For replacement parts email: bulbs@premierdec.com
Complies with safety requirements of BS EN 60598 Manufactured and Imported by:
PREMIER DECORATIONS LTD
United Kingdom: HA4 0EJ
EU: Inniscarra, Co Dublin, D24 E029

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>