SinoTrack ST-905L 4G GPS Tracker for Vehicles User Manual

SinoTrack ST-905L 4G GPS Tracker for Vehicles

Product Information

Specifications

• ST-905 Dimensions: 806822mm
• ST-915 Dimensions: 806840mm
• ST-925 Dimensions: 1127845mm
• Weight: 150g, 300g, 500g
• Network: GSM/GPRS
• Band: 850/900/1800/1900Mhz
• GPS sensitivity: -159dBm
• GPS accuracy: 5m
• Charging input: DC 5V==1.0A
• Battery Standby:
  • ST-905: 3.7V 5000mAh battery (60 days)
  • ST-915: 3.7V 10,000mAh battery (120 days)
  • ST-925: 3.7V 20,800mAh battery (240 days)
• Humidity: 5%–95% non-condensing

Hardware Description (ST-915 as example)

INDICATOR LIGHT STATUS

• Yellow light – Solid: GPRS connection
• Yellow light – Flash: No GPRS signal
• Blue light – Solid: GPS connection
• Blue light – Flash: No GPS signal

Note: GSM SIM CARD INSTALLATION GUIDE:

• Only GSM SIM card works in this model
• If you use 3G or 4G card, please confirm it should have GSM function
• Please confirm the SIM Card without PIN Code

Models

PREFACE

Thank you for purchasing SinoTrack GPS tracker. This manual shows how to operate the device smoothly in details, please make sure to read this manual carefully before using the device. Please be noted that any update of the manual is made without prior notice. Each time the update of the manual will be released in the latest product sales. The manufacturer won’t assume any legal responsibility for any errors or omissions made in this manual.

1 SUMMARY

Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP and Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.

Dim.

| ST-905: 806822mm ST-915: 806840mm

ST-925: 1127845mm

Weight| 150g, 300g, 500g
Network| GSM/GPRS
Band| 850/900/1800/1900Mhz
GPS sensitivity| -159dBm
GPS accuracy| 5m
Charging input| DC 5V==1.0A

Battery

| ST-905: 3.7V 5000mAh battery ST-915: 3.7V 10,000mAh battery

ST-925: 3.7V 20,800mAh battery

---|---
Stand by| 60days, 120days, 240days

Storage Temp.

|

-40°C to +85°C

Operation Temp.| -20°C to +55°C
Humidity| 5%–95% non-condensing

Hardware Description

Hardware Description (ST 915 as example)

Note: GSM SIM CARD INSTALLATION GUIDE:

Only GSM SIM card works in this model

• If you use 3G or 4G card , please confirm it should have GSM function.
• Please confirm the SIM Card without PIN Code.

TURN ON THE DEVICE

• Open the rubber cover; insert the SIM card (chip up) to the slot
• The indicator light is on when SIM card is inserted.
• The device gets GPS l ocation when there is GPS signal and gets LBS location when there is no GPS signal.
• The device automatically turns off when the SIM card is removed.

SMS TRACKING

Note: The yellow space is a blank in SMS command.

1. Call the SIM card phone number in tracker, you will receive a Google Maps link of position,or sending message “ 669 0000 ” to SIM card phone number in tracker .

E.g:

Admin number setting

• Command: phone number +password 1 This phone number is your own mobile phone number , not the SIM card number in tracker .
• Reply: SET OK

E.g: 13265790180 0000 1

Voice Monitor

• Send command 66 to the GPS Tracker from control number, The tracker will call back to this control number.

When the unit is in over speed alarm, shake sensor alarm, or low ba ttery alarm, it will send alert to the admin number. 13265790180

Admin number Canceling:

• Command: D101#
• Reply: SET OK

Over speed Alarm setting

• Over speed Alarm setting:
  • Command: 122 0 000 070 Suppose speed is 70km/h
  • Reply: SET OK

E.g:

• When the unit speed is over 70km/h, it will send message “speed alarm!” to the admin number every 5 minutes.

Over speed Alarm canceling

• Command: 122 0000 0
• Reply: SET OK

Shake Alarm setting

• Command: 1 81 0000 T 10
• Message Reply: SET OK

Note

• Pls keep the tracker being stationary for 5 minutes, this function will work.
• The tracker will send SMS “ Shock alarm!” to the admin number when the unit get shocked.

Shake alarm Canceling:

• Command: 18 0 0000
• Reply: SET OK

Take off Alarm setting (Factory default setting is on.)

• Command: TAKEOFF 0000 1
• Message Reply: SET OK

Note: There is anti removal induction sensor on the back of device. I f this covered induction sensor is not covered again. I t will send Take off A larms! to admin number and SOS number by SMS.

Take off Alarm Canceling:

• Command: TAKEOFF 0000 0
• Reply: SET OK

Device working mode setting

1. WORK Keep working mode: (7 days per 10000mAh)
   • Command: WORK 0000
   • Reply: SET OK
   • (The tracker will keep working and send data by time interval)
2. MOVE Work when the tracker is moving: (30 days per 10000mAh)
   • Command: MOVE 0000
   • Reply: SET OK
   • (Factory setting is “ MOVE ” mode)
   • (Tracker only works when it is moving, when it is stopped, it will sleep , GPS shut off, GSM works in low consumption mode. Vibration, SMS command, callin g tracker can wake up the tracker to work 5 minutes .)
3. STANDBY SMS or Call to tracker, it will work 5 minutes.
   • (120days per 10000mAh)
   • Command: STANDBY 0000
   • Reply: SET OK
   • (Standby mode, GPS shut off, GSM works in low consumption. SMS, calling can wake up the tracker to work 5 minutes
4. Terminal (local) Time Setting (factory setting GMT 0)
   • Command: 896 0000 E00
   • Reply: SET OK

E.g:

• 896 0000 E0 1
• 896 0000 W 0 1
• 896 0000 E00

Reset Hardware

• Command: RESET
• Reply: SET OK

Read the Configure data

• Command: RCONF
• Reply: the ID, work mode, IP and Port, APN of tracker.

EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE

It’s the setting of tracker

• ST 915 the model of tracker
• ID: 61 80127780 the ID of GPS Tracker
• UP: 0000 the password of SMS
• U1:, U2:,U3: The control number
• MODE: GPRS MOVE : GPS work mode
• DAILY: OFF,GEO FENCE:OFF,OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:OFF,SLEEP:ON status of tracker
• APN: internet APN of the SIM Card
• IP: 45.112.204. 242 :8 090 the IP and Port of tracker
• GPRS UPLOAD TIME: 30 the GPS time interval
• TIME ZONE: 0.0 time zone of tracker

START ONLINE TRACKING

Every sim card carrier has own APN content, we have two methods to find out apn content : check sim card carrier on internet or put sim card into cell phone to find out APN

• SMS: 8030000 APN
  • (APN is Access Point Name of your SIM Card, please check with your SIM Card provider if you don’t know it)

E.g

• For MTN SIM card in South Africa , we got APN information
• APN name: internet
• APN username:
• APN password:

Send SMS to set apn below

• 8030000 internet

If the APN need User name and Password, please send the command: SMS: 8030000 APN APNuser APNpassword

E.g

For tesco mobile SIM card in UK, we got APN information below.

• APN name: prepay.tescomobile.com
• APN username: tescowap
• APN password: password

Send SMS to set apn below

• 8030000 prepay.tesco-mobile.com tescowap password
• SMS: 8040000 IP PORT
• Send SMS to set trackers to our server: SMS: 8040000 45.112.204.242 8090

WEB SITE TRACKING

• Platform: VIP.SinoTrack.com
• User name: ID on the tracker
• Password: 123456

APPLICATIONS FOR ANDROID/IOS

You can search SinoTrack PRO on APP Store (iOS) or Google Play (Android) Or Download from the QR Code:

If you have more SinoTrack GPS trackers , and want to manage them in one account, please contact us, we will create an account for you, so you can monitor multiple devices on the platform at the same time.

Notices

1. GPS tracking can be worked outdoor.
2. Please make sure GSM SIM card supports making calls, sending messages, GPRS network.
3. Please make sure GSM SIM card is with sufficient balance.
4. Please make sure the GSM card has opened the call shows and turned off the call transfer.
5. Please insert the GSM phone card correctly.
6. Do not assembly and disassembly device at will.

FAQ

FAQ and processing methods

Please check if SIM card is GSM network. ****

Don’t turn on the PIN code ****

no calls can be diverted

Please check if voltage of the power is normal

Please check if voltage of the power is normal

No GPS| A more open view of the sky is recommended to make sure the device can receive the GPS signal normally.
No reply to SMS| Password wrong or the format is wrong.
No reply to calling & No alarm message| Authorized / admin phone number is incorrect or has not setup
SMS position OK, cannot use the APP and web platform| Please check if APN is correctly set. And please find out the correct APN content of the SIM card. (Please refer to 6 setting.)
Platform position is difference from the actual position.| No upload position time or GPS signal: call the device phone number and receive the position message. If it no GPS signal. The position is the last GPS positioning location; If it has GPS signal, it means the device doesn’t reach the uploading time.

References

• Loading...
• Loading...

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>