meross MSS630 Outdoor Smart Plug User Manual
- June 15, 2024
- Meross
Table of Contents
MSS630 Outdoor Smart Plug
User Manual
MSS630 Outdoor Smart Plug
Warranty
Meross products are covered by a 12-month limited warranty from the date of
purchase. Please visit https://www.meross.com/support/warranty for detailed
warranty policy and product registration.
Disclaimer
- The function of this smart device is tested under a typical circumstance described in our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
- By using third-party services including but not limitted to Amazon Alexa, Google Assistant, Apple HomeKit and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
- Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom. Customers acknowledge understanding of these articles clearly by reading this manual.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body.
FCC Compliance Information Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Safety Information
- Do not install the plug with wet hands or when standing on wet or damp surfaces.
- Do not plug electrical appliances with a current of more than 15A to this plug.
- Do not soak the plug in water or spray water on it. Otherwise, it will be damaged.
- The outlets should remain capped with the included waterproof covers while not in use. Otherwise, the plug might be damaged by rain or dew.
Installation Guide
-
Download the Meross app.
http://bucket-meross-static.meross.com/production/qrcode/meross.html
-
Plug MSS630 into an outlet near home Wi-Fi. * This is required during setup process only.
- MSS630 supports 2.4GHz Wi-Fi only.
3. Set up the device.
(1) Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
(2) Make sure your smart device is covered by strong Wi-Fi signal.
(3) Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.
(4) Tap the “+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.
(5) Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.
WaterprooflP64
LED and Button Rules
How to use
-
Set up the device in the Meross app and link to the voice assistants.
Device name: Change device name.
LED: Turn on/off LED indicator.
User manual: Check user manual. -
Link Meross to Google Assistant or Amazon Alexa
Set up the device in the Meross app and link to the voice assistants. Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow Meross to link with Alexa. Link to Google Assistant
Go to Account-> Google Assistant and follow the step-by-step instructions to complete the linking process. -
Widgets
Widgets are the quick access to your Meross devices and Scenes. To enable it, please go to Account -> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.
For iPhones:
1. Swipe to the right on your Home or Lock screen.
2. Scroll down to the bottom of your widget list and then tap edit.
3. Scroll down to find Meross and add it.
For Android smartphones:
1. On the home screen, tap and hold on an available space.
2. Tap Widgets, find Meross widget and then add it.
FAQ
At Meross we strive to assure your satisfaction. We are happy to assist at support@meross.com.
1. What devices can I control with the Smart Wi-Fi Outdoor Plug?
You can control lights, fans, humidifiers, portable heaters, and outdoor electric appliances in accordance with the MSS630's specifications (up to 15A ).
2. What if I can't control the smart device with the Meross app?
You can troubleshoot the following: - Check if your home Wi-Fi is working properly. - Make sure that you have disabled access control in your router and that the smart device is not blocked by the router's firmware. - Factory reset your smart device and try to add it again.
To learn more, you can visit https://www.meross.com/support/faqs to find solutions for more frequently asked questions. Wi-Fi network.
SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@meross.com
Website: www.meross.com
Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: No. 1312, Building E6-1, Tianfu Software Park, Chengdu, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>