meross 5723239 Smart LED Light Strip User Manual

meross 5723239 Smart LED Light Strip

Safety information

1.  The LED light strip consumes DC 12V power, NEVER connect it to DC 24V.
2. Do NOT immerse the light strip/controller/power adapter into water.
3. Do NOT light the strip on for over 5s when they are rolled on the plastic reel.

Package Contents

• 1x LED Light Strip
• 1x Controller
• 1x Connector
• 1x Power Adapter
• 5 x Fixing clip

If you find ony part missing in the package, please contact https://meross.com/support/Email_Support. We will provide proper solution for you.

Installation Guide

1. Download the Meross app.

2. Connect the power cable and power the device up.

3. Set up the device.

4. Make sure your smart device is covered by strong Wi-Fi signal.

5. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.

6. Tap the”+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.

7. Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.
   NOTE:

8. If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.

9. Find more at https:ljwww.meross.com/support/.

10. Use the provided clips or the tape on the light strip to hong or ottoch the device to the place you desire.
    Note: Please be careful not to tear off the adhesive tape.

NOTE: Please make sure the surface is smooth, dry, clean. DO NOT stick the LED strip on such surfaces, such as knitted/wool fabrics, dust wall, rough plastic suface, frosted glass.

Tips: How to make a 90 degree turn with the smart LED light strip?

LED and Button Rules

1. CD LED light strip: Flash 3 times to enter into configuration mode. Flash smoothly from Red to Green to Blue to Warm to Cold White: Successfully connected.
2. Power: Short press to turn light strip ON/OFF. Long press 5s to factory reset the light strip.

How to Use

1. General Settings
   • Device name: Change device name.
   • User manual: Check user manual.
2. Voice Control
   • Amazon Alexa & Google Assistant: Check how to pair Amazon Alexa and Google assistant under Account->lntegration.
   • Amazon Alexa:  The example commands are as follows:
   • “Alexa set the smart light strip to red.”
   • “Alexa set the smart light strip warmer.”
   • “Alexa, dim smart light strip by 30%.”
   • Google Assistant: The example commands are as follows:
   • “Hey Google, brighten smart light strip.”
   • “Hey Google, set the smart light strip to cool light.”
   • “Hey Google, change the smart light strip to magenta.”

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are most concerned about.

1. Can I cut and splice the light strip? Yes, the light strip is cut-able. Please use the provided connector to splice the 2 light strips, as the output of the provided power adapter is only 12V/1.5A, it can support powering up light strip of 16.8ft long or less.
   NOTE: Please make sure that the metal terminals are exposed and meet each other.

2. How do I reset my Smart Wi-Fi LED Light Strip? Press and hold the power button far 5 seconds, it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all your custom settings, and you’ll have to set it up again.

3. What should I do when my Meross opp is unable to control the added Smart Wi-Fi LED Light Strip? Please check the following:

   • Check the main Wi-Fi internet connection.
   • Make sure the main Wi-Fi password hasn’t been changed.
   • Hold button far 5 seconds to reset and try to add it again.

Warranty

Moss products are covered by 12 months limited warranty from the date of its original purchase. If any problems occur, please contact support@meross.com for help. We can only provide aftersales service for products that are sold by Meross or Meross authorized retailers and distributors.

Disclaimer

1. The function of this smart device is tested under a typical circumstance described in our specifications. Moss does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
2. By using third-party services including but not limited to Amazon Alexa, Google Assistant, Apple HomeKit, and Smart Things, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
3. Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibil­ity therefrom. Customers acknowledge understanding of these articles clearly by reading this manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>