meross Smart Desk Lamp Eye Caring Design User Manual

meross Smart Desk Lamp Eye Caring Design

Safety Information

• Place on flat or secure surface.
• ONLY use the supplied AC Power adapter.
• Keep the lamp dry and clean.
• Do not attempt to disassemble, repair, or modify the device.
• This product should not be exposed to direct sunlight.
• Don’t touch electrical parts with web hands.
• Never overload electrical circuits as it may cause electrical shock or fire.

Package Contents

• 1x User Manual
• l x Power Adapter
• 1x Smart Desk Lamp

Lamp Size

Installation Guide

1. Download the Meross opp.
2. Connect power cable and power the device up.
3. Set up the device.
4. Connect your smartphone or tablet to the 2.4 GHzWi-Fi.
5. The smart device supports iOS 13/ iPadOS 13 and later. In order to have better user experience, it is recommended that you upgrade your iOS or iPadOS to the latest version before pairing with the device.
6. Launch the Meross app, and log in to your account, or if you are a new user, tap Sign up to create a new account.
7. Tap the”+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish the configuration.

Note:

1. As long as you finish configuration, you’ll also be able to manage the device in Apple Home app.
2. If the QR code does not work, please try to add the smart device in Apple Home app.
3. Should you have any question, please visit https://www.meross.com/support#/.
4. Relocate the device to your desired place. No extra configuration is equired. Please make sure your desired place is covered by Wi-Fi.

LED and Button Rules

1. Status LED
   Blinking 3 times: Initialization process finished, entering into configuration mode.
   Blinking smoothly from warm to white: Successfully connected.

2. Power Button
   Short press to turn on/off the light.

3. Mode Button
   Short press to change color temperature. Hold for 5 seconds to reset device.

4. Brightness Button:
   ” +” Brighten the light. – Dim the light.

How to Use

1. General Settings Device name: Change device name. User manual:
   Check user manual.

2. Voice Control Amazon Alexa & Google Assistant:
   Check how to pair Amazon alexa and Google assistant on Account->lntegration.
   Amazon Alexa:
   The example commands are as followings:
   Google Assistant:
   The example commands are as followings:
   -“Hey Google, brighten smart desk lamp.”
   -“Hey Google, set the smart desk lamp to cool white.”
   HomeKit Siri:
   The example commands are as follows :
   -“Hey Siri, brighten smart desk lamp.”
   -“Hey Siri, set the smart desk lamp to cool white.”
   -“Hey Siri, dim smart desk lamp by 30%.”
   Note: Please replace “smart desk lamp” to the device name you set.

3. Widgets
   Widgets are the quick access to your Meross devices and Scenes. To enable it. please go to Account-> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.

For iPhones

1. Swipe to the right on your Home or Lock screen.
2. Scroll down to the bottom of your widget list and then tap edit.
3. Scroll down to find Meross and add it.

For Android smartphones:

1. On the home screen, tap and hold on an available space.
2. Tap Widgets, find Meross widget and then add it.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are mostly concerned about.

1. How do I reset my Meross Smart Desk Lamp? Hold the mode button for 5 seconds, it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all of your custom settings, and you’ll have to set it up again.

2. What should I do when my Meross app is unable to control the added Smart Desk Lamp? Please check the following:

   • Check the main Wi-Fi internet connection.
   • Make sure the main Wi-Fi password hasn’t been changed.
   • Hold mode button for 5 seconds to reset and try to add it again.

3. How do I pair my Meross devices with Amazon Alexa or Google Assistant?
   Visit Account->Amazon Alexa or Google Assistant page within Meross app for pairing instructions.

4. My Home app can’t add the device by scanning the QR code.
   You can tap “Don’t Have a Code or Can’t Scan” and input the code manually.

5. I can’t pair my device with HomeKit anyhow.
   Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS 13 or later. Restart your iOS will help due to some system cache issue.

Warranty

Meross products are covered by a 12 months limited warranty from the date of its original purchase. If any problems occur, please contact support@meross.com for help.
We can only provide aftersales service for products that are sold by Meross or Meross authorized retailers and distributors.

Disclaimer

1. The function of this smart device is tested under a typical circumstance described in our specification. Meross does NOT guarantee that under all circumstances will the smart device perform the same way as described.
2. By using any third-party services such as Amazon Alexa, Google Assistant, Apple HomeKit. Consumer acknowledge that all data and privacy collected by such third parties are not covered by Meross, nor Meross would take any legal responsibility. Meross only take responsibility for what’s covered by Meross Privacy Policy. Consumer acknowledge understanding this clearly by reading this document.
3. Any damage caused by ignoring WARNING is not covered by Meross aftersales and Meross will take NO legal responsibility. Consumer acknowledge understand­ing this clearly by reading this document.

FCC STATMENT

Federal Communication Commission (FCC) Statement for Users
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and perated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC

Innovation, Science and Economic Development Canada (ISED) Statement for Users
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Cet emetteur ne doit pas etre Co-place ou ne fonctionnant en m8me temps qu1aucune autre antenne ouemetteur. Cet Squipement devrait Gtre install8 et actionne avec une distance minimum de 20 centimetres entre le radiateur et votre corps.
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@meross.com
Website: www.meross.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>