ELEGANT LT2100 Table Lamp Instruction Manual
- June 15, 2024
- ELEGANT
Table of Contents
ELEGANT LT2100 Table Lamp
Product Information
Specifications:
- Product Name: Table Lamp
- Manufacturer: All the Rages Inc
- Model Number: N/A
- Power Requirement: 1 x 60W Type A Medium Base Bulb (not included)
- Warranty: Limited Warranty
- Manufacturer Address: 355 Eisenhower Parkway Suite 101, Livingston, NJ 07039
- Manufacturer Website: www.alltherages.com
- Country of Origin: China
Product Usage Instructions
- Before using the table lamp, ensure that the lamp is unplugged.
- Find a suitable location for the table lamp on a stable surface.
- Insert the appropriate Type A Medium Base Bulb into the lamp socket. Ensure that the bulb is securely fitted.
- Plug the table lamp into a power outlet.
- To turn on the lamp, locate the power switch located on thelamp base or cord. Flip the switch to the ON position.
- To adjust the brightness of the lamp, use a compatible dimmer switch if available or use a bulb with lower wattage.
- To turn off the lamp, flip the power switch to the OFF position or unplug the lamp from the power outlet.
Cleaning & Maintenance:
- Ensure that the table lamp is unplugged before cleaning.
- Use a clean, dry, soft, lint-free cloth to wipe the lamp’s surface and remove any dust or debris.
- Avoid using water or any chemical cleaning agents as they may damage the lamp’s finish.
- For stubborn stains or marks, gently use a mild soap solution on a cloth and wipe the affected area. Ensure that the lamp is completely dry before plugging it back in.
Frequently Asked Questions (FAQ):
Q: What type of bulb does the table lamp require?
A: The table lamp requires 1 x 60W Type A Medium Base Bulb (not
included).
Q: Where can I contact customer service for this product?
A: You can contact our customer service department via email at
[email protected].
Q: Is there a warranty for this product?
A: Yes, there is a limited warranty for this product. Please refer to the
warranty details provided by All the Rages Inc.
Table Lamp
Questions?
E-mail our customer service department at
[email protected]
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the carton.
- Gently pull the cord from the bottom of the lamp until the Socket Assembly (A) is close enough to screw into the lamp base (B).
- Screw Socket Assembly (A) counter clockwise until tight against the lamp base (B) .
- Place Harp (D) into Saddle (C).
- Remove the plastic from shade (E) and place onto Harp (D) and secure in place with Finial (F).
- Install light bulb. Only use bulb of specified type and maximum rated wattage or less. Turn the lamp ON/OFF using the rotary switch located on the socket.
Requires 1 x 60W Type A Medium Base Bulb (not included)
CLEANING & MAINTENANCE
- Unplug the fixture before cleaning.
- Use a clean, dry, soft, lint-free cloth.
- Do not use water or other chemical cleaning agents.
LIMITED WARRANTY
All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:
-
Limited Warranty.
Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products.
Installation of the replacement products or replacement parts shall be at Buyer’s expense. -
Exclusive Obligation:
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages. -
Other Statements.
Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty. -
Entire Obligation.
This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.
ALL THE RAGES INC
355 EISENHOWER PARKWAY
SUITE 101
LIVINGSTON, NJ 07039
WWW.ALLTHERAGES.COM
PRINTED IN CHINA