Elegant Designs LT3326-CBL Modern Colored Dimpled Glass End table Bedside Table Desk Lamp Instruction Manual

Elegant Designs LT3326-CBL Modern Colored Dimpled Glass End table Bedside

Table Desk Lamp

Product Information

This product is a table lamp manufactured by All The Rages Inc. It is designed to provide lighting in various indoor settings. The lamp requires 1 x 60W Type A Medium Base Bulb, which is not included in the package. The lamp is made of durable materials and
has a limited warranty provided by All The Rages Inc.

Product Usage Instructions

1. Before cleaning or performing any maintenance, make sure to unplug the lamp from the power source.

2. For cleaning, use a clean, dry, soft, lint-free cloth. Avoid using water or any chemical cleaning agents to prevent damage to the lamp.

3. To install the bulb, ensure that the lamp is unplugged. Locate the bulb socket, usually found at the top or bottom of the lamp.
   Insert the Type A Medium Base Bulb into the socket and twist it clockwise until it is securely in place.

4. After installing the bulb, plug the lamp into a suitable power outlet.

5. To turn on/off the lamp, locate the switch or knob usually located on the lamp’s base or cord. Toggle or rotate the switch/knob accordingly.

6. Ensure that the lamp is placed on a stable surface to prevent it from falling or tipping over.

7. If you experience any issues or have questions regarding the product, please contact All The Rages Inc.’s customer service department at [email protected].

Note : This product is printed in China and has a limited warranty provided by All The Rages Inc. For warranty claims or further information, refer to the address and website mentioned in the user manual.

Questions?
E-mail our customer service department at [email protected]

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the carton.
2. Gently pull the cord from the bottom of the lamp until the Socket Assembly (A) is close enough to screw into the lamp base (B).
3. Screw Socket Assembly (A) counterclockwise until tight against the lamp base (B) .
4. Place Harp (D) into Saddle (C).
5. Remove the plastic from shade (E) place it onto Harp (D) and secure it in place with Finial (F).
6. Install a light bulb. Only use bulbs of specified type and maximum rated wattage or less. Turn the lamp ON/OFF using the rotary switch located on the socket.

CLEANING & MAINTENANCE

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.

PART REQUIRED

Requires 1 x 60W Type A Medium Base Bulb (not included)

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

1. Limited Warranty.
   Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to the Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, the Manufacturer shall, at its own expense, furnish replacement products or, at the Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at the Buyer’s expense.

2. Exclusive Obligation:
   THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of the Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. The manufacturer shall not have any other obligation concerning the products or any part thereof, whether based on contract, tort, strict liability, or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall the Manufacturer be liable for incidental, special, or consequential damages.

3. Other Statements.
   Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.

4. Entire Obligation.
   This Limited Warranty states the entire obligation of the Manufacturer concerning the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.

References

• Home | All The Rages

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>