Elegant Designs LT2048-AQU Table Lamp Instruction Manual

: June 15, 2024
: Elegant Designs

Table of Contents

Elegant Designs LT2048-AQU Table Lamp
Product Information
Product Usage Instructions
Lighting Control
Specifications
FAQ
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
CLEANING & MAINTENANCE
LIMITED WARRANTY
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Elegant Designs LT2048-AQU Table Lamp

Product Information

Table Lamp

This table lamp is a stylish and functional lighting solution for your home or office.
It features a sleek design that will complement any decor.
The lamp requires a 1 x 60W Type A Medium Base Bulb (not included).
It is manufactured by All The Rages Inc., located at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039.
For more information, visit their website at www.alltherages.com.

Product Usage Instructions

Installation

To install the table lamp, please follow these steps:

Select a suitable location for the lamp on a stable surface.
Insert the Type A Medium Base Bulb into the lamp socket. Ensure that the bulb is securely screwed in.
Plug the lamp into a power outlet.

Lighting Control

To turn the lamp on or off, use the switch located on the power cord.
Simply toggle the switch to the desired position.

Specifications

Type: Table Lamp
Power Requirement: 1 x 60W Type A Medium Base Bulb (not included)
Manufacturer: All The Rages Inc
Address: 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039
Website: www.alltherages.com

FAQ

Q: Where can I purchase the Type A Medium Base Bulb?
A: The Type A Medium Base Bulb can be purchased at most hardware stores or online retailers that sell light bulbs.
Q: Can I use LED bulbs with this lamp?
A: Yes, you can use LED bulbs with this lamp as long as they have the appropriate base type and wattage.

Questions?

E‐mail our customer service department at customerservice@alltherages.com.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter this safety feature.
This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

Carefully remove all parts from the carton.
Gently pull the cord from the bottom of the lamp until the Socket Assembly (A) is close enough to screw into the lamp base (B).
Screw Socket Assembly (A) counterclockwise until tight against the lamp base (B).
Place Harp (D) into Saddle (C).
Remove the plastic from shade (E) place it onto Harp (D) and secure it in place with Finial (F).
Install a light bulb. Only use bulbs of specified type and maximum rated wattage or less. Turn the lamp ON/OFF using the rotary switch located on the socket.

CLEANING & MAINTENANCE

Unplug the fixture before cleaning.
Use a clean, dry, soft, lint‐free cloth.
Do not use water or other chemical cleaning agents.

Requires 1 x 60W Type A Medium Base Bulb (not included)

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

Limited Warranty.
Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to the Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, the Manufacturer shall, at its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at the Buyer’s expense.
Exclusive Obligation:
THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of the Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. A manufacturer shall not have any other obligation to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall the Manufacturer be liable for incidental, special, or consequential damages.
Other Statements.
Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.
Entire Obligation.
This Limited Warranty states the entire obligation of the Manufacturer to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.