ELEGANT B07N3SXCJS 600mm Round LED Bath Mirror Instructions
- May 15, 2024
- ELEGANT
Table of Contents
ELEGANT B07N3SXCJS 600mm Round LED Bath Mirror
Please read this instruction carefully before installation, and refer to it again during the installation to ensure a safe and correct installation of the mirror.
Product parameters
| Input voltage: | 110-130V | Input frequency: | 50/60 Hz |
|---|---|---|---|
| Color temperature: | 3000-6000k | Item model number: | Round-32 |
| Light Color: | White / Warm / Warm white changeable | ||
| Material: | 5mm environmental protection HD silver mirror | ||
| Features: | 3 colors dimmable light, dimmable brightness, Defogging |
Operation Instructions
Defogging switch
Light /Dimming switch
-
Light on/off
Power on, then press to turn the light on, the light is white light. Then second time press the light will change to warm light. The third time press , the light change to warm white light . Then press again to turn the light off. -
Dimming instruction
Power on, press to turn the light on, then keep pressing , the brightness will change accordingly. -
Anti-fog function
Power on, press , the mirror to defogging, then press again to stop defogging.
Wiring Diagram
Product accessories
-
Mirror
-
Wall plug
-
Screw
-
Balance spacer
Installation Instructions
Step 1
Measure the distance between the two hooks of the mirror.
Step 2
According to the distance from A, choose a suitable height and punch two
holes in the wall.
Step 3
Drive the expansion plug into the hole on wall. then put screw into the
expansion plug, keep 15mm screw away from wall to hang mirror.
Step 4
According to the needs, paste spacers on the back of the mirror (to keep the
mirror balanced), and then hang the mirror.
Electrical Safety Instructions
Please make sure to keep the electrical supply off during installation and
maintenance.
DO NOT put hard and sharp materials directly against the mirror surface during
operation.
Please to turn off the power supply in storm days.
DO NOT switch off the power supply directly during normal operation.
Please turn off the power supply if the product is not used for a long time.
DO NOT remove protective film or corner protectors until the mirror is
completely installed.
DO NOT use outdoors.
PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.