ELEGANT 3503D26G 1 Light 26 inch Gold Pendant Ceiling Light Instruction Manual
- June 8, 2024
- ELEGANT
Table of Contents
Installation manual for
**3503D26G
**
3503D26G 1 Light 26 inch Gold Pendant Ceiling Light
Dimensions : D26″H3″
Collection : Monroe
Bulb Type : LED PCB 36W 3000K
Lamp Weight :16.72LBS
Total Weight : 20.24LBS
Thank you for choosing our product(s).
Our Company is actively involved in every step of the production.
Our product(s) are designed to be utilized for every application that graces
your home or business.
We pride ourselves in providing the most prompt and courtesy service to all of
the valued customers.
Please find the enclosed detailed instruction and read carefully for proper
installation.
If you have any questions, please contact the retailer Where the purchased was
made.
SAFETY
Warning: MAKE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS
SHUT OFF.BY EITHER REMOVING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER.
CAUTION
- Before assembling the lighting fixture, please read all instructions carefully.
- All frame & crystal components are fragile, please handle with care.
- Required supply circuit : 110 – 130V/60Hz
- Labeled wires are “L” for live wire, “N” for neutral wire,“E”for ground wire.
- Never install fixture on damp ceiling, the room should be dry and well ventilated
- All electrical components must be installed by a licensed electrician and in accordance with the National Electrical Code and the appropriate local electrical codes.
Unpack the Package
Please open the box carefully and check all the items are inside the box.
If you have any installation, assembling and missing parts questions.
where you purchase from and any other relevant information ready, our customer
service team will provide comprehensive and worry free service to our valued
customers.
Frame Assembly Diagram
Step 1
Please use the partslist to ensure you are not missing any parts.
PARTS LIST
Parts number| Picture| Description| Qty| Diagram
number
---|---|---|---|---
MB9R05| | Ceiling Plate| 1| ZA
CP9R04G| | canopy| 1| ZB
| connector| 4| ZC
| M5 screw cap| 2| ZD
P-3503D26G-1| | ssl 224# ø 3.6mm141.8″ electric wire| 3| P01
| ssl 224# ø 3.6=1149.6″ electric wire| 1| PO2
| 4W high voltage LED PCB| 8| P03
| D8″ H8 wire fixer| 4| PO4
| D26″ upside S.S slice| 1| P05
| 2.4″ metal pipe| 16| P06
| D26″ downside S.S slice| 1| P07
RC620-3-CL| | 1.2″3″crystal| 113| A
RC2020-30-CL| | 1.2″1.2″crystal| 48| B
Step 2
Canopy Installation Instruction
IMPORTANT: Test sockets with bulb before dressing the fixture.
- Use two screws (ZG) to fix the Ceiling Plate (ZA) on the ceiling; which are not supplied and should already be in your box.
- Be sure when connecting the wire use electrician approved junction caps(ZE).
- Stow the excess wire in the canopy(ZB).
- Align the canopy (ZB) with the hanging plate screw, fix the lamp on the ceiling, tighten and fix it with a M5 screw cap (ZD).
- If you need to cut the wire, please find the label
” L=Black wire ” on the ceiling plate(ZB),
(1)
N=White Wire
it is the main line of power. After adjusting the wires, please use them to connect the “N” and “L” wires to power.
Step 3
Frame Assemly Diagram
Frame Assembly Instructions
Installation:
Please read all instructions carefully. Before you proceed to install, make
sure that the power supply is turned off and remains off until installation is
complete.
Please note that each part has been assigned a number. Please proceed in a
numerical order.
- Fixed the Ceiling Cover on the Mounting Bracket , then put the screws tightened.
- Please unscrew the connector (02) of the expansion part before adjusting the line, and then screw on the cap after adjusting the line.
Crystal Dressing Diagram
Congratulations!
You are now done installing your Elegant Lighting fixture. Sit back and
admire each crystal as it will become the statement piece for your room/house.
Thank you.
Cleaning and Maintenance of Chandelier Frame
The finish on our chandelier frames and fixture frames is protected by a
durable coating of lacquer. To clean, use a clean soft, dry cloth. Do not use
any metal polishes, cleaners, abrasives or any substance which could remove
the protective finish. Failure to follow these instructions automatically
voids the guarantee.
Cleaning and Maintenance of Crystals
Wet a soft cotton fabric in clean warm water and wipe gently, then polish with
a dry soft cotton fabric.
To Order Crystal Replacement Parts
Should you require replacement crystals or pins (the metal connectors
attaching the crystals), contact the store where the product was purchased or
contact us.For ease of ordering, you may use the original crystal trimming
instructions provided with this product and circle the items you wish to
order, indicating the quantity by writing the number needed adjacent to the
circle . You will be contacted with prices prior toshipment. All orders must
be pre-paid.
Elegant Lighting Warranty
The finish and frame of your new chandelier or fixture are warranted for a
period of one (1) year from the date of purchase. Our company will, at its
option, repair or replace any frame that has a defect in the materials or
workmanship during the warranty period. All crystals are guaranteed for their
original quality during the life of the chandelier. Breakage is not covered by
this warranty.
To make a claim under this warranty, contact our customer service department.
A written return authorization form will be sent to you with specific
instructions.
Returns and Conditions of Warranty
Returns must be pre-authorized by contacting our customer service
department .Returns will only be accepted with a written return merchandise
authorization and return shipping charges pre-paid. We reseserve the right to
inspect all returned merchandise to fully determine the nature of any defect.
This guarantee shall not apply to any product
that has been changed, altered or otherwise modified, nor shall it apply to
any product that has been repaired or altered by anyone other than a pre-
authorized facility. We will not be responsible for any breakage or damages
incurred during transit, nor for crystal parts or metal frame part that have
been subject to misuse, negligence, accident or inappropriate handling. Also,
we will not be held responsible for damage incurred during improper
installation or wiring by others, nor for damages resulting from a failure to
follow the recommended maintenance or installation procedures. This guarantee
is issued in lieu of any and all other guaranteed or warrantee, whether
written or implied and any and all other obligations or liabilities. Further,
we neither authorize nor permit any other person or firm to assume for us, any
liability in connection with the sale of our products.