ECHOGEAR EGCM1 Full Motion Corner TV Mount Instruction Manual
- June 13, 2024
- ECHOGEAR
Table of Contents
- ECHOGEAR EGCM1 Full Motion Corner TV Mount
- Product Information
- Product Usage Instructions
- Verify Your Wall Construction
- Grab Your Tools
- What’s in the Box .
- Attach the TV BRACKETs TO YOUR TV
- Install the Wall Plate
- Hang Your TV
- Adjustments
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ECHOGEAR EGCM1 Full Motion Corner TV Mount
Product Information
- Product Name: Full Motion Corner TV Mount
- Model: EGCM1 – Manufacturer: Echogear
- Languages: English, Spanish, French, German, Dutch, Swedish, Japanese, Chinese, Russian
- Website: echogear.com
Product Usage Instructions
Step 1 : Attach the TV Brackets to Your TV
- TV Screw Diameter: Determine the screw size that fits your TV – M4, M6, or M8.
- TV Screw Length: Depending on your TV’s back design, choose whether to use a spacer or not:
- No Spacer: If your TV has a flat back, use a short screw and a washer.
- Spacer Needed: If your TV has deep inset holes or cable interference, use a long screw, a washer, and a spacer.
- Rounded or Irregular Back: If your TV’s back is not flat, the TV brackets may not rest flat on your TV.
- Secure the TV Brackets to Your TV: Ensure that the TV brackets are level and attached securely to your TV using the appropriate screws, washers, and spacers.
Step 2: Install the Wall Plate
- Determine Your Mount Location: Determine the center of the stud in the corner where you want to mount your TV. The stud center must be located within the minimum and maximum distances from the corner, depending on your TV size.
- Install the Wall Plate: Use the provided drill template to mark the holes on the wall. Install the wall plate, ensuring it is securely attached to the wall.
Note: The user manual provides additional steps and hardware information for further installation. Please refer to the complete manual for detailed instructions. For any uncertainties or assistance, you can contact the Echogear Pros by visiting their website or referring to the contact information provided in the manual.
Verify Your Wall Construction
CAUTION: DO NOT install into drywall alone
… unless you WANT to watch your TV fall and crash onto the floor.
UUUUHHH?!?Unsure?
Contact The Echogear Pros (See Back Page)
Grab Your Tools
What’s in the Box .
WARNING: DON’T FEED TO CHILDREN — This product contains small items that
could be a choking hazard if swallowed. Before starting assembly, verify all
parts are included and undamaged. If any parts are missing or damaged, do not
return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included in this kit will be used.
STUFF FOR STEP 1
STUFF FOR STEP 2
Attach the TV BRACKETs TO YOUR TV
TV Screw Diameter
Only one screw size fits your TV. “Suggested uses the extra screws: board game
pieces, industrial jewelry sweet corn holders, musical instrumrents–like
maracas o ‘monsoon’ sticks , stocking stuffers, Currency not most
NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.
CAUTION: Verify adequate thread engagement with your screw 01 , washer 02, spacer 03 combination AND TV bracket 04 .
TV Screw Length
NO SPACER
Flat Back TV [TV brackets 04 lay flat on your TV]
SPACER NEEDED
Flat Back TV with Extra Space Needed
[for deep inset holes or cable interference] Rounded or Irregular Back TV
[TV brackets 04 NOT resting flat on your TV]
Secure the TV Brackets to Your TV
Install the Wall Plate
Determine Your Mount Location to Center Your TV in the Corner
MIN/MAX shown are for typical (diagonal) TV sizes. If you’re the type that needs a more precise measurement to locate your TV, see PAGE 19.
- Mark
- Drill
- Secure Wall Plate
CAUTION: Avoid potential personal injury or property damage! Lag screws 7 MUST BE firmly tightened to prevent unwanted movement of the wall plate/arm 6 .
-
Attach Plate Covers
-
Assemble Extensions
-
Assemble End Caps
-
Tighten Screws
Hang Your TV
Open the Safety Locks
Hang Your TV
HEAVY! You may need assistance with this step.
“Ask that friend of yours that yammers on about CrossFit”
IMPORTANT:
TV brackets 4 MUST be centered AND span the faceplate of arm 6 .
Secure Your TV
CAUTION: Avoid potential personal injury or property damage! Bracket clips and screws MUST be installed to the secure the TV in place. DO NOT OVERTIGHTEN.
Level and Lock
Adjustments
Tilt
Your TV should adjust easily when moved, then stay in place. If your TV is too
loose or too tight, adjust tilt lever T .
NOTE: Once your TV is in place, tighten the tilt lever T to prevent unwanted movement.
Level
REMOVE YOUR TV
HEAVY! You may need assistance with this step.
“Don’t be a hero!”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>