ECHOGEAR EGMA-EDM1 Echo Dot Wall Mount Gen Instruction Manual
- June 7, 2024
- ECHOGEAR
Table of Contents
ECHOGEAR EGMA-EDM1 Echo Dot Wall Mount Gen Instruction Manual
What’s in the Box
-
Cover ( qty. 1)
-
Base (qty. 1)
-
Wall Plate Screw (qty. 2)
-
Anchor **(qty. 2)
**
- 3M Command™ Strip **(qty. 2)
**
Grab Your Tools (not needed for 3M Command™ Strip install)
-
Pencil
-
Level
-
Phillips Screwdriver
-
Electric Drill
Drywall Install
-
Hammer
-
1/4 in. (6 mm)Drill Bit
Wood Stud Install
-
Stud Finder
-
1/8 in. (3 mm) Wood Drill Bit
Secure The Base
Drywall Only Installation
Wood Stud Installation
CAUTION:
- Avoid damage to the base.
- DO NOT overtighten the screws.
Command™ Strip Installation
-
Lightly clean both wall and base surfaces with isopropyl alcohol.
DO NOT use household cleaners as they may leave behind residues which can affect adhesion. -
Remove the red liner
-
Remove the black liner
Attach The Cover
Install Your Dot
To Remove
Warning
DO NOT pull the 3M Command™ strip AWAY from the wall.
Contact Us
Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA
P: 1 -855-428-2490
helpmehelpyou@ECHOGEAR.com
ECHOGEAR.com
Legrand AV Netherlands B.V.
Franklinstraat 14 6003 DK Weert, Netherlands
P: +44 (0) 800 0568188
helpme@ECHOGEAR.com
ECHOGEAR.com
Legrand Australia
Unit 20 / 33 Meakin Road
Meadowbrook QLD 4131, Australia
P: +61 (0) 7 3299 7000
ECHOGEAR.com
Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©2019 Legrand AV Inc. All Rights Reserved. ECHOGEAR is a Legrand AV Inc. brand and a registered trademark owned by Legrand. Made in China. Legrand AV Inc.
- 6436 City West Parkway
- Eden Prairie, MN 55344 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>