ALI Speaker Wall Mount Holder Installation Guide
- June 7, 2024
- ALI
Table of Contents
ALI Speaker Wall Mount Holder
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call qualified technician.
Check carefully to make sure there are no missing or detective parts,
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
Serious Or Fatal Crushing Injuries Can Occur From TipOver.
To Help Prevent TipOver:
Never Allow Children To Climb Stand Hand Or Play On Any Part Of Monitor OR
Stand.
Use TipOver Restart OR Anchor Stand to Wall
Use Of Tipover Restraints May Only Reduce, But Not Eliminate Risk Of Tip
Over.
Small Parts- Not For Children Under 3 Years. Adult Supervision Is Required.
Supplied Parts List
Instructions
Step 1
Option A: Wood Stud
Drill holes at the marked positions. Place the Bracket over the marked screw
locations. Insert Screws into the mounting holes and tighten using a
screwdriver.
Option B: Concrete/Brick Wall
Drill holes at the marked positions. Insert the Anchors into the mounting
holes. Place the Bracket over the marked screw locations. Insert Screws into
the mounting holes and tighten using a screwdriver.
Step 2
Guide the Dot 2nd Gen to the bracket. Tie the power cord with Velcro Strap if needed.
We support the technology that brings your home to life.
We offer high quality products, professional customer service, and extensive
technical support.
If you have any questions ,please contact us.
1-844-SATTLER (18447288537)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>