BLAUPUNKT BPH-R02BU Dual Track Shaver User Manual
- June 15, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT BPH-R02BU Dual Track Shaver User Manual
**** Important tips
-
Please read the instruction manual carefully before using the product.
-
This device is waterproof, which means it can be washed under the water. However we recommend that you do not leave it in water or damp places for extended amounts of time. (Figure 1)
-
The shaver blade accessory can be washable.
-
The head of this product can’t be pulled up. (Fig. 2)
-
To ensure the best shaving experience the foil is extremely thin, so please don’t puncture it or hit it against sharp and or hard objects, doing so might damage the foil and which in turn might cause damage to your skin.
-
This appliance can be used, cleaned or maintained by person with reduced physical sensory or mental capabilities or lack of experience and knowledge (including children) if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
**** Reminder
- The head of the shaver is an attractive place for bacteria. Please clean it regularly.
- A shaver shouldn’t be used by multiple people especially with other people to who have any kind of skin diseases.
**** Charging
-
Make sure that the device is switched off when it is charging.
-
The product voltage is USB DC5V±1%.
-
Keep the product between 5°C to 35°C when charging. Please don’t put the device in places where sunlight shines directly on it or excessively hot places while charging. (Fig. 3)
-
First, connect the USB charging power cord to the USB adaptor power jack, and then connect the USB power cord to the shaver bottom jack. Then, the red charging indicator will light up.
The blue light comes on when fully charged. **(Fig. 4)
**
- After fully charging, please dis connect the charger.
****Shaving
-
Press the touch electronic switch of the shaver to start the shaver, and the blue light begins to light up. To stop the shaver, press the on button again. (Fig. 5)
-
Press the on/off switch 3 seconds to lock up the shaver. Then the lock indicator light will light up, avoiding any trouble if turn on the shaver by accident. You can press the button for 3 seconds to unlock it. (Fig. 6)
-
Move the shaver head against the beard growth direction, and make a straight, firm shaving movements to shave. (Fig. 7)
-
Shaving dry usually works best, we recommend that you shave before you wash your face or after washing your face.
-
It will take a while for your skin to adapt to the shaver.
Neckhair can also be shaved off. -
When a shaver head is damaged, do not shave with it, doing so might damage your skin.
**** Cleaning
- You must turn off the shaver when cleaning.
- Regular cleaning ensures better shaving results.
- Cleaning of shaving parts:
- Clean the shaving system components once a week.
- Use the product’s accompanying cleaning brush. First, clean the product from the top.
- Hold the head part up with a little force, open the head part, brush the storage bin (hair bin), (The head part is absorbed by the magnet) **(Fig 8, 9)
**
4. Press both sides of the blade net at the same time to remove the blade holder and the blade. **(Fig 10) **
5. Clean the foil with cleaning brush. **(Fig 11) **
6. Clean storage bins. **(Fig 12) **
7. If necessary, you can clean the foil with the cleaning substances (such as alcohol); if so, lubricate the foil with a drop of sewing oil after cleaning so as to avoid the abrasion of the foil. **(Fig 13) **
8. Carefully place the blade into the knife net, then install the shaving parts on the shaver as is, and tighten clockwise.
9. After the installation, open the shaver for inspection. When shaving, the shaver heads should be close to the face and the shaving should be comfortable, and the noise should not be excessively loud.**** Replace shaver components
- When the head is worn or damaged, please replace it with special shaver head, it will make your shaving experience more comfortable.
- When the fittings of the shaving head or other parts are damaged, please replace them.
**** Removing the battery
- The batteries in this product contain substances that might pollute the environment. If you want to discard the shaver, open the cover, remove the battery, and bring it to a designated recycling plant. **(Fig 14, 15)
**
- Before removing the battery, the shaver must be powered off and it should be ensured that the battery is dead. If there is residual power left, turn on the shaver until it stops working.
- Remove the battery.
- After the battery is removed, DO NOT attempt to charge the device.
ENVIRONMENTAL PROTECTION NOTICE.
This appliance may contain pollutants that are harmful to the environment, if you wish to dispose of this appliance please remove the battery inside and send the battery to a designated recycling plant.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>