VIGO VG02003 Brant Pull Down Spray Kitchen Faucet User Manual

INSTALLATION INSTRUCTION

PRODUCT FEATURES

• Single hole mount with easy installation
• 1.8 gum flowrate
• Dual-action, pull-down spray head s extendable up to 3
• Solid brass construction makes this faucet durable and easy to clean
• Features smart handy lever design to allow for tighter space installation
• Premium finish resists corrosion and famishing
• All VIGO Kitchen Faucets feature a quality-assured Limited Lifetime Warranty.

PACKING LIST

• Faucet Assembly
• Sprayer Allen Key
• Two Metal Braided Counterweight
• Plastic Holder

Tool Requirements

• Adjustable Wrench
• Eye Protection
• Safety Gloves
• Plumber’s Putty (Optional)
• Pipe Tape
• Flat Screwdrivers

Dimensions

FRONT VIEW

FAUCET MEASUREMENTS
Faucet height : 18 1″ (467mm)
‘Spout reach : 84″ (209mm)
Water supply connection : 38
Spout Swivel : 360°
Hose length : 30″

SIDE VIEW

FAUCET SPECIFICATIONS

Flow rate : 1.8 gal/min
Pressure : 60 psi
Valve body : Brass
Installation compatibility : 1-, 2-, 3- and 4-hole sink
‘Spray mode : Spray or Steam
Spout Type : Pull-down

Parts List

1. 74001 : Spray Hose
2. 74013 : Sprayer
3. 78062 : Handle Assembly
4. 74035w : Cartridge
5. 74050 : Counterweight
6. 78108 : Mounting Assembly
7. 74058 : Plastic Support Holder
8. 74027 : Plastic Sprayer Holder
9. 74020 : Supply Hoses

Installation Steps

Installation must be done by a qualified licensed plumber.
STEP : 1
1.1) Preparation
1.1.1 Tum off hot and cold water fines.
1.1.2 Unscrew hoses.
1.1.3 Remove the hoses.
1.1.4 Remove old tape from hot and cold threads

STEP : 2
1.2) Cold and hot hose installation to the faucet
1.2.1 Wrap plumbers tape onto cold and hot pipe threads
1.2.2 Place the hoses
1.2.3 Screw on hoses to cold and hot pipe threads

STEP : 3
1.3) Faucet placement
1.3.1 Place faucet into hole of countertop
1.3.2 Set faucet in place on countertop with handle to right side

STEP : 4
1.4) Securing the faucet
1.4.1 Place plastic holder, rubber ring, metal ring and brass nut onto large threaded pin at the bottom of the faucet
1.4.2 Secure the faucet by tightening the brass nut

STEP : 5
1.5) Installing spray hose
15,2 Place the spray hose
1,5,3 Screw spray hose into sprayer pipe

Depending on the configuration of your faucet hose/clip setup, you may use either 1.6 Option A or 1.6 Option B
STEP : 6 OPTION A
1.6A ) Counterweight installation – Clipping
1.6A.1 Place the counterweight on the spray hose.
1,64,2 Clip the counterweight on the spray hose

STEP : 6.1 OPTION B
1.6B ) Counterweight installation – Screwing
1.68.1 Unscrew all screws from the counterweight and separate before installation
1.68.2 Place the counterweight on the spray hose
1.68.3 Fasten screws into the counterweight

STEP : 7
1.7) Open the water lines
1.7.1 Wrap tape on cold and hot pipe threads
1.7.2 Place the hose
1.7.3 Screw the hoses onto cold and hot threads
1.7.4 Open cold and hot water lines

Troubleshooting

housing, wash thoroughly with hot water and reseat in housing.

2| Insufficient flow rate| 1B – Cartridge defective| 1B – Contact VIGO

Product Support for replacement.

3| Leak at connection points| 2 – Clog in supply hose line| 2 – Remove

supply lines and fishy lines.

4| Leak at connection points| 3A – Flexible hose leaking at connection point|

3A-Tighten hoses. If this does not resolve the issue, remove the flexible hose and rethread, checking to make sure the connection is secure. Make sure to use pipe tape.

5| Loose handle| 3B – Washer defective| 3B – Remove supply line and check the

status of the washer. If torn, washer must be replaced for a secure, non- leaking connection.
| | 4- Mounting hardware became loose| ~ From under the counter, use an adjustable wrench and tighten the mounting hardware. Make sure the faucet is perpendicular to the counter
| | 5 – Set screw has become loose| 5 – Take off hot/cold cover on handle. This will give you access to the screw that connects the handle to the cartridge. Using either an allen key or a flat head screw driver, tighten the screw so handle has firm connection to cartridge.

SHARE YOUR VIGO PRODUCT AND GET FEATURED!

We hope you love your new VIGO item as much as we do!
Feel free to leave a review on vigoindustries.com and don’t forget to share any photos on Instagram with #vigoindustries
The best renovations will be featured on blog.joindustries.com and @vigoindustries social media.

SAFETY TIPS

Installation must be done by a qualified licensed plumber. Prior to installation please read the instructions. thoroughly, confirm that all parts are included and visually inspect the unto for any defects. If you have any Questions please contact the VIGO Technical Support Department before proceeding with installation.

If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed before using flame. Damage caused by improper soldering will void the warranty. Protect your eyes with safety glasses when cutting or soldering water supply lines.

CLEANING RECOMMENDATION FOR VIGO PRODUCTS

Modern faucets and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. Be sure to avoid using abrasive materials while cleaning VIGO products.

Registers YOUR PRUDUCT
IN ORDER TO ACTIVATE YOUR WARRANTY YOU MUST REGISTER YOUR PRODUCT
VIGOINDUSTRIES.COM/REGISTER

ACTIVATE NOW

CLEANING INSTRUCTIONS FOR FAUCETS AND SHOWERS

Please follow the instructions on your cleaning materials. In addition, pay attention to the following points:

• NEVER SPRAY DIRECTLY ON TAPWARE
  

• SPRAY ONTO SPONGE/ CLOTH
  

• CLEAN REGULARLY
  

• RINSE THOROUGHLY WITH CLEAN WATER
  

• Clean the faucets and showers as needed and when required.

• The amount of cleaning product needed and the time the cleaner needs in order for effective cleaning to take place should be adjusted according to products; cleaning product should not be left on VIGO product longer than necessary. :

• Clean regularly to prevent calcification.

• When using spray cleaner, spray first onto a cloth or sponge – never directly onto the sanitary tapware as drops could enter openings and gaps and cause damage. spray

• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

• Recommended cleaning solution for hard water and soap scum is to use 50/50 water and vinegar solution.

CLEANING MATERIAL FOR FAUCETS AND SHOWERS

Acids are necessary ingredients of cleaning materials for removing lime, however, please pay attention to the following points when cleaning faucets and showers:

• Only use cleaning materials that are explicitly provided for this type of application.
• Never use cleaning materials that contain hydrochloric, formic or acetic acid, as they cause considerable damage.
• Phosphoric acid is also restricted as it can cause damage to the finish.
• Never mix any cleaning material with another.
• Never use cleaning materials that have an abrasive effect, such powdered and industrial cleansers, scouring pads or micro fiber cloths.

CERTIFICATE & WARRANTY

GUPG, NSF-61, NSF 372, AB1953, CEC certified by IAPMO R&T, ADA compliant

REGISTER YOUR PRODUCT

In order to activate your warranty, you must register your product.

vigoindustries.com/register

Share your VIGO product and tag
#vigoindustries for a chance to be featured.

Vigo industries
VIGO Product Support 866-591-7792 (Option 2) Monday – Friday 9:30am – 5:30pm EST

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>