SCOSCHE BTMSMSC1 BoomBottle MS MagSafe Magnetic Bluetooth Speaker User Manual
- June 15, 2024
- Scosche
Table of Contents
BoomBottle®MS
INCLUDED ELEMENTS
(1) BoomBottle® MS Magnetic Wireless Speaker
(1) MagicRing™
(1)Mounting Template
(1)USB-C Cable
(1) Cleaning Wipe
DEVICE SETUP
SECTON A- Overview
SECTION B – Power / Pairing / Audio Controls
SECTON C – Dual Pairing
SECTION D -Deice Mount
SECTION E – Charging & Speiatons
SECTION F – MoutingBse/ 3 5mm Audio ln
SECTION A
A. BoomBottle® MS
- MagSafe™ Compatible Magnetic Mourt
- Botde Opener
- Control Panel with Integrated Cover
- MagiMount™ Magnetic Base
B. MagicRing™
C. Mounting Template for MagicRing™
D. USB-C Cable
E. Cleaning Wipe
SECTION B
| Function | Multifunction Button (MFB) | Indicator |
|---|---|---|
| Power On | Tap & hold 3 sec. | Audio Tone & LED |
| Power Off | Tap & hold 3 sec. | Audio Tone & LED |
Pairing
(A)| Speaker will automatically enter
pairing mode 3 seconds after
powering on.| Blinking LED
&Audio Tone
Notes:
Speaker will display as °BoomBottle MS° in device’s Bluetooth setting.
Speaker automatically reconnects to last paired device when powered on.
Reset: Power on speaker, then tap & hold 3 buttons for 1 sec.
Audio Controls
B| Play/Pause| Tap MFB Once
C| Next Track| Tap MFB Twice
D| Previous Track| Tap MFB 3 Times
E| Volume Up| Tap “+” Once
F| Volume Down| Tap “—” Once
G| Answer/End Call| Tap MFB Once
SECTION C
A. Dual Pairing
(already connected to mobile device)
1.Tap & hold MFB 3 sec on new speaker.| Audio tone indicates the speakers are
paired together.
2.Tap & hold ‘+’ &’-‘ buttons 3 sec. on connected speaker.
3.Connected speaker will reconnect to the mobile device after dual pairing.|
Audio tone indicates the speaker reconnects to mobile device
B. Dual Pairing Two Speakers
(before connecting to mobile device)
1.Tap & hold MFB 3 sec on both speakers.| Audio tone indicates the speakers
are paired together.
2.Tap & hold 1+’ &’-‘ buttons 3 sec on one speaker.
3.Search for one speaker in device’s Bluetooth settings.
Speaker will display as ‘BoomBottie MS’| Audio tone indicates the speaker
connects to mobile device.
SECTION D
A. iPhone 12 or Later
(with optional MagSafe case)
If using a case, it mustbe a MagSafecase (ot induded).
B. iPhone 12 or Later
(without case)
*Not compatble with Magsafe chrarging.
C. Non-MagSafe Devices
Use included template to acauntely posion Magicking on device
Caserequired. Manufacturing mateials do not allow adhesives to bond directly tothe device
SECTION E
Charging
Press MFB once (A) to check battery level (B).
Open the control panel cover (C) Charge the Boom Bottle MS using the included
USBC cable (D) with a USBC charger or other USB.C power source (not induded).
Specifications
Music Time: Up to 12 Hours
Charge Input 5V ****2A
Range: 33 ft. (10m)
Waterproof Rating: IP67
Max Opeating Tempertue: 45°C Bluetoth v5.0
Caution
-
high or low extreme temperatures that a battery can be subjected to during use, storage or transportation
-
low air pressure at high altitude
-
replacement of a battery with an incorrect type that can defeat a safequard
(for example, in the case of some lithium battery types) -
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion
-
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
-
a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
SECTION F
Magnetic Mounting Base
Place the magnetic base of the BoomBottle MS on a flat metal surface (A).
Note: BoomBottle MS may also be attached toa 1/4″ threaded camera mount (B).
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by tuming the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Canada Statement
This device contains license-exempt transmitter(s}/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
BoomBottle MS HowTo Video …
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Phone: 800-363-4490 x1 /
805-486-4450 x1
www.scosche.com
©2023 Scosche Industries
Scosche, BoomBottle, MagicMount & MagicRing are trademarks of Scosche
Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California
S| BTMSMSC1 10/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>