UNITECK Unifix 100 B Floor or Wall Panel Instruction Manual
- June 15, 2024
- UNITECK
Table of Contents
UNITECK Unifix 100 B Floor or Wall Panel
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.
UNIFIX 100 B
Unifix brackets have been specially designed to fix your Unisun photovoltaic
panels or equivalent (see compatible panels part):
Unifix 100 B for your Unisun panels 20.12M (X2) / 20.24M (X2) / 50.12M /
50.24M / 55.12BC / 80.12M / 100.12M / 100.24M / 110.12BC or panels up to 560
mm width.
Easy to install, Unifix 100B can be fixed on a horizontal or vertical rigid
flat surface (e.g. wall, concrete floor, wood frame).
With their galvanized steel structure and corrosion-resistant stainless-steel
screws, they are perfectly suited for outdoor use.
Equipped with a multi-position tilting system, Unifix brackets allow for an
optimization of your panel’s performance depending on the chosen orientation.
Electrical performance depending on tilt and panel orientation
|
0°
| 30°| 60°| 90°
East| 93%| 90%| 78%| 55%
South east| 93%| 96%| 88%| 66%
South| 93%| 100%| 91%| 68%
South west| 93%| 96%| 88%| 66%
West| 93%| 90%| 78%| 55%
To connect the the panel / regulator / battery, we recommend that you use the Uniconnect 1.6 ready-to-use kit that optimizes your electrical performance and simplifies installation (kit for connecting 1 panel)
PANEL COMPATABILITY
With the design based on the use of Oblong drilling, Unifix can be used with
different kind of panels on the market.
Unifix 100 B accepts only 1 panel, with the spacings and dimensions of panels
as indicated below
| Number of panels| Spacers for fastening of each panel
(in mm)
| Panel Dimension Max
(in mm)
| Total weight Of panels (In Kg)
---|---|---|---|---
| x1| L (e)| H (e)| L (p)hh| H (p)
Unifix
100B
| ●| No mini| 200>540| No maxi| 560| 12
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity.
Consider the additional load with the panel:
| Support | Panels |
|---|---|
| Unifix 100 B = 2,6 kg | Unisun 20.12M (X2) / 20.24M (X2) / 50.12M |
/ 50.24M / 55.12BC / 80.12M / 100.12M / 100.24M / 110.12BC
| =2kg / 2kg / 4kg / 4,7kg / 3,8kg / 6,3kg / 7,5kg / 7,5kg / 7kg
Fastening : to prevent large quantities of snow from accumulating behind
the sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose
the most optimal inclination and orientation to suit your environment. Avoid
shaded areas or objects that are a source of shadow (eg tree)
SAFETY INSTRUCTIONS
- Take the appropriate mesures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself.
- When finished, check and ensure that all of your brackets and panels are fixed properly
Recommended tightening torque
Nb. Mean coefficient of friction μ=0.20 / Clamping at 50% of yield point
| Screw | Torque |
|---|---|
| M5 | 5,10 Nm |
| M 6 | 8,80 Nm |
| M 8 | 21,50 Nm |
| M 10 | 44,00 Nm |
Fix the pieces n°45 and n°46 on the frame of your Unisun solar panel depending on the width of your panel (see diagram below). Pre-tighten the nuts. The final tightening will be done at the end of the assembly.
Unifix is equipped with a multi-position tilt system. (10 positions). Set the desired tilt depending on the desired orientation.
Electrical performance depending on tilt and panel orientation
|
0°
| 30°| 60°| 90°
Est| 93%| 90%| 78%| 55%
Sud- Est| 93%| 96%| 88%| 66%
Sud| 93%| 100%| 91%| 68%
Sud Ouest| 93%| 96%| 88%| 66%
Ouest| 93%| 90%| 78%| 55%
Fix the pieces n°43 and n°44 on the pieces n°45 and n°46 .
Fix your bracket with screws adapted to the supporting surface (screws and dowels not supplied).
WARRANTY
The warranty covers any defect, manufacturing flaws for 1 year from the date
of its purchase
(Pieces and workforce).
Warranty does not cover:
- normal wear of parts
- Falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
- the dated proof of purchase (receipt, bill…)
- explanatory note of the failure
Caution : Our after-sales service does not accept carriage forward/
collected returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
After-sales service contact :
Uniteck
1 Avenue de Rome
Zae Via Europa
Immeuble le Cassis
34350 Vendres
France
E-mail sav@uniteck.fr
Fax : +33 (0)4 88 04 72 20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>