PRO-ELEC PELB1703 Surge Protected Extension Lead User Guide
- June 15, 2024
- PRO ELEC
Table of Contents
PRO-ELEC PELB1703 Surge Protected Extension Lead User Guide
IMPORTANT SAFETY INFORMATION
- The cable must be fully unwound before use.
- Avoid use in damp conditions.
- For indoor use only.
- Do not remove the 13a plug and connect directly to a mains supply.
- Do not exceed the total maximum load across all sockets of 13A / 3120W.
Note: This is not a lightning strike arrester.
OPERATION
- Surge protection is used to protect voltage sensitive devices such as computers from power surge fluctuations caused by electrical equipment connected to the same mains supply circuit.
- Connect the 13A plug to a mains socket.
- Connect the devices you require to power and protect to the outlet sockets and turn on the power.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in China
PO Box 13362 Dublin 2
PR2 9PP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>